How to Change the Oil in a 2020 Polaris Sportsman 850 TRAIL
Maintaining your 2020 Polaris Sportsman 850 TRAIL is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before we dive into the step-by-step guide, make sure you have all the necessary tools and parts. Shop parts for a 2020 Polaris Sportsman 850 TRAIL ATV.
Tools and Materials Needed
- Oil filter wrench
- Drain pan
- Socket wrench set
- New oil filter
- 4 quarts of recommended engine oil
- Funnel
- Clean rags
Step-by-Step Guide
1. Prepare Your ATV
Ensure your Polaris Sportsman 850 TRAIL is on a level surface and the engine is cool. This prevents burns and ensures accurate oil drainage.
2. Remove the Drain Plug
Place the drain pan under the engine. Use a socket wrench to remove the drain plug located at the bottom of the engine. Allow the old oil to completely drain into the pan.
3. Replace the Oil Filter
Using the oil filter wrench, remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, tightening it securely.
4. Reinstall the Drain Plug
Once the oil has completely drained, reinstall the drain plug. Ensure it is tightened securely to prevent leaks.
5. Add New Oil
Using a funnel, pour the new engine oil into the oil fill cap located on the top of the engine. The 2020 Polaris Sportsman 850 TRAIL typically requires about 2 quarts of oil, but always check your owner's manual for the exact amount.
6. Check Oil Level
Start the engine and let it run for a few minutes. Turn it off and wait a few minutes for the oil to settle. Use the dipstick to check the oil level, ensuring it is within the recommended range. Add more oil if necessary.
7. Dispose of Old Oil
Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.
Important Notes for the 2020 Polaris Sportsman 850 TRAIL
The 2020 Polaris Sportsman 850 TRAIL is equipped with advanced features such as electronic power steering and a high-output engine. Regular maintenance, including timely oil changes, is essential to keep these features functioning optimally. Always use the recommended oil type and filter to ensure compatibility and performance.
By following these steps, you can ensure your Polaris Sportsman 850 TRAIL remains in top condition, ready for any adventure. Regular maintenance not only extends the life of your ATV but also enhances your riding experience.
Related Shopping Categories
Shop Motor Oil for a 2020 Polaris Sportsman 850 TRAIL ATV.
Shop Oil Filters for a 2020 Polaris Sportsman 850 TRAIL ATV.
Shop Oil Drain Pans for a 2020 Polaris Sportsman 850 TRAIL ATV.
Shop Tools for a 2020 Polaris Sportsman 850 TRAIL ATV.
Shop Oil Fillers and Drain Plugs for a 2020 Polaris Sportsman 850 TRAIL ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.