How to Change the Oil in a 2019 Polaris Sportsman Touring 850 SP

Maintaining your 2019 Polaris Sportsman Touring 850 SP is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before you start, make sure you have the necessary tools and supplies, including the correct oil and filter for your ATV.

Shop parts for a 2019 Polaris Sportsman Touring 850 SP ATV.

Tools and Supplies Needed

  • Oil filter wrench
  • Drain pan
  • Socket wrench set
  • Funnel
  • New oil filter
  • 4 quarts of 5W-50 synthetic oil

Step-by-Step Guide

Step 1: Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure all the old oil drains out completely.

Step 2: Drain the Old Oil

Locate the oil drain plug underneath the engine. Place the drain pan under the plug, then use a socket wrench to remove the plug. Allow the oil to completely drain into the pan.

Step 3: Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, tightening it securely.

Step 4: Add New Oil

Reinstall the oil drain plug and tighten it with the socket wrench. Using a funnel, pour the new 5W-50 synthetic oil into the oil fill port. Check your owner's manual for the exact oil capacity, but it typically requires around 2 quarts. Be careful not to overfill.

Step 5: Check Oil Level

Start the engine and let it run for a few minutes. Turn it off and wait a couple of minutes for the oil to settle. Use the dipstick to check the oil level, ensuring it is within the recommended range. Add more oil if necessary.

Important Notes for the 2019 Polaris Sportsman Touring 850 SP

The 2019 Polaris Sportsman Touring 850 SP is equipped with a powerful engine that requires regular maintenance to perform at its best. Always use the recommended oil type – 5W-50 synthetic – to ensure optimal performance. Additionally, check for any oil leaks after completing the oil change, as this could indicate a problem with the oil filter or drain plug installation.

By following these steps, you can keep your Polaris Sportsman Touring 850 SP running smoothly and efficiently. Regular oil changes are a simple yet effective way to maintain your ATV's performance and extend its lifespan.

Related Shopping Categories

Shop Motor Oil for a 2019 Polaris Sportsman Touring 850 SP ATV.

Shop Oil Filters for a 2019 Polaris Sportsman Touring 850 SP ATV.

Shop Oil Drain Pans for a 2019 Polaris Sportsman Touring 850 SP ATV.

Shop Tools for a 2019 Polaris Sportsman Touring 850 SP ATV.

Shop Oil Fillers and Drain Plugs for a 2019 Polaris Sportsman Touring 850 SP ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.