How to Change the Oil in a 2018 Honda Rancher 420 4X4 ES (FE1)

Maintaining your 2018 Honda Rancher 420 4X4 ES (FE1) is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before we dive into the step-by-step guide, make sure you have all the necessary tools and supplies ready.

Shop parts for a 2018 Honda Rancher 420 4X4 ES ATV.

Tools and Supplies Needed

  • Oil filter
  • 4 quarts of 10W-30 or 10W-40 oil
  • Oil drain pan
  • Socket wrench set
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your Honda Rancher is on a level surface and the engine is cool. This will prevent burns and ensure accurate oil drainage.

2. Drain the Old Oil

Locate the oil drain plug underneath the engine. Place the oil drain pan beneath it. Use a socket wrench to remove the drain plug and allow the old oil to completely drain out. Once drained, replace and tighten the drain plug securely.

3. Replace the Oil Filter

Locate the oil filter on the side of the engine. Use an oil filter wrench to remove the old filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Screw the new filter into place by hand until it is snug, then tighten it an additional quarter turn.

4. Add New Oil

Remove the oil fill cap located on the top of the engine. Using a funnel, pour the new oil into the engine. The 2018 Honda Rancher 420 4X4 ES typically requires about 2.6 quarts of oil. Check the oil level with the dipstick to ensure it is at the correct level, adding more if necessary.

5. Check for Leaks

Start the engine and let it run for a few minutes. Check around the oil filter and drain plug for any signs of leaks. If you notice any, turn off the engine and tighten the components as needed.

6. Dispose of Old Oil

Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.

Important Notes for the 2018 Honda Rancher 420 4X4 ES (FE1)

The 2018 Honda Rancher 420 4X4 ES (FE1) is equipped with an Electric Shift Program (ESP) which allows for easy gear changes. Regular maintenance, including oil changes, is essential to keep the ESP functioning smoothly. Additionally, always use the recommended oil type to ensure the best performance and longevity of your ATV.

Related Shopping Categories

Shop Motor Oil for a 2018 Honda Rancher 420 4X4 ES ATV.

Shop Oil Filters for a 2018 Honda Rancher 420 4X4 ES ATV.

Shop Oil Drain Pans for a 2018 Honda Rancher 420 4X4 ES ATV.

Shop Tools for a 2018 Honda Rancher 420 4X4 ES ATV.

Shop Oil Fillers and Drain Plugs for a 2018 Honda Rancher 420 4X4 ES ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.