How to Change the Oil in a 2017 Suzuki King Quad 400FSi 4X4 AUTO

Maintaining your 2017 Suzuki King Quad 400FSi 4X4 AUTO is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your ATV's engine runs smoothly and efficiently. Before we dive into the step-by-step guide, make sure you have all the necessary tools and supplies ready.

Shop parts for a 2017 Suzuki King Quad 400FSi 4X4 AUTO ATV.

Tools and Supplies Needed

  • Oil filter
  • 4-stroke engine oil (check your manual for the recommended type)
  • Oil drain pan
  • Socket wrench set
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure accurate oil drainage.

2. Locate the Drain Plug

The drain plug is located at the bottom of the engine. Place the oil drain pan underneath to catch the old oil.

3. Drain the Old Oil

Using a socket wrench, carefully remove the drain plug. Allow the oil to completely drain into the pan. Once drained, replace and tighten the drain plug securely.

4. Replace the Oil Filter

Locate the oil filter and use an oil filter wrench to remove it. Before installing the new filter, apply a small amount of new oil to the rubber seal of the filter. Install the new filter by hand, ensuring it is snug but not overtightened.

5. Add New Oil

Remove the oil fill cap and use a funnel to pour the new oil into the engine. Refer to your owner's manual for the correct oil capacity. After filling, replace the oil fill cap.

6. Check Oil Level

Start the engine and let it run for a few minutes. Turn it off and wait a few minutes for the oil to settle. Use the dipstick to check the oil level and add more oil if necessary.

Important Notes for the 2017 Suzuki King Quad 400FSi 4X4 AUTO

The 2017 Suzuki King Quad 400FSi 4X4 AUTO is known for its robust performance and reliability. However, regular maintenance is key to keeping it in top condition. Always use the recommended oil type and filter to ensure compatibility and performance. Additionally, check for any leaks after changing the oil and address them immediately to prevent engine damage.

By following these steps, you can ensure your Suzuki King Quad 400FSi 4X4 AUTO remains in excellent working condition, ready for any adventure you throw its way.

Related Shopping Categories

Shop Motor Oil for a 2017 Suzuki King Quad 400FSi 4X4 AUTO ATV.

Shop Oil Filters for a 2017 Suzuki King Quad 400FSi 4X4 AUTO ATV.

Shop Oil Drain Pans for a 2017 Suzuki King Quad 400FSi 4X4 AUTO ATV.

Shop Tools for a 2017 Suzuki King Quad 400FSi 4X4 AUTO ATV.

Shop Oil Fillers and Drain Plugs for a 2017 Suzuki King Quad 400FSi 4X4 AUTO ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.