How to Change the Oil in a 2017 Honda Rancher 420 4X4 ES (FE1)

Maintaining your 2017 Honda Rancher 420 4X4 ES (FE1) is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before we dive into the step-by-step guide, make sure you have all the necessary tools and parts. Shop parts for a 2017 Honda Rancher 420 4X4 ES (FE1) ATV.

Tools and Materials Needed

  • Oil filter
  • 4 quarts of 10W-30 or 10W-40 oil
  • Oil drain pan
  • Socket wrench set
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your Honda Rancher is on a level surface and the engine is cool. This prevents burns and ensures accurate oil drainage.

2. Drain the Old Oil

Locate the oil drain plug underneath the engine. Place the oil drain pan beneath it. Use a socket wrench to remove the drain plug and allow the old oil to completely drain out. Once drained, replace and tighten the drain plug securely.

3. Replace the Oil Filter

Locate the oil filter on the side of the engine. Use an oil filter wrench to remove the old filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Screw the new filter into place by hand until it is snug, then tighten it an additional quarter turn.

4. Add New Oil

Remove the oil fill cap on top of the engine. Using a funnel, pour in the new oil. The 2017 Honda Rancher 420 4X4 ES typically requires about 2.6 quarts. Check the oil level with the dipstick to ensure it is at the correct level, adding more if necessary.

5. Check for Leaks

Start the engine and let it run for a few minutes. Check around the oil filter and drain plug for any leaks. If you notice any, turn off the engine and tighten the components as needed.

6. Dispose of Old Oil

Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.

Important Notes for the 2017 Honda Rancher 420 4X4 ES (FE1)

The 2017 Honda Rancher 420 4X4 ES (FE1) features an Electric Shift Program (ESP) which allows for easy gear changes with the push of a button. This model is known for its reliability and versatility, making it a popular choice for both work and recreational use. Regular maintenance, including timely oil changes, will ensure that your ATV continues to perform at its best.

Related Shopping Categories

Shop Motor Oil for a 2017 Honda Rancher 420 4X4 ES (FE1) ATV.

Shop Oil Filters for a 2017 Honda Rancher 420 4X4 ES (FE1) ATV.

Shop Oil Drain Pans for a 2017 Honda Rancher 420 4X4 ES (FE1) ATV.

Shop Tools for a 2017 Honda Rancher 420 4X4 ES (FE1) ATV.

Shop Oil Fillers and Drain Plugs for a 2017 Honda Rancher 420 4X4 ES (FE1) ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.