How to Change the Oil in a 2010 Suzuki King Quad 750AXi 4X4

Maintaining your 2010 Suzuki King Quad 750AXi 4X4 is essential for optimal performance and longevity. One of the most critical maintenance tasks is changing the oil. Regular oil changes ensure that your ATV runs smoothly and efficiently. Follow this guide to change the oil in your King Quad 750AXi 4X4.

Shop parts for a 2010 Suzuki King Quad 750AXi 4X4 ATV.

Tools and Materials Needed

  • Oil filter
  • 4 quarts of 10W-40 ATV oil
  • Oil drain pan
  • Socket wrench set
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure all the old oil drains out completely.

2. Remove the Skid Plate

Use a socket wrench to remove the bolts securing the skid plate. Set the skid plate aside to access the oil drain plug.

3. Drain the Old Oil

Place the oil drain pan under the drain plug. Use the socket wrench to remove the drain plug and allow the old oil to completely drain out. Once drained, replace the drain plug and tighten it securely.

4. Replace the Oil Filter

Locate the oil filter and use an oil filter wrench to remove it. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Install the new filter by hand, ensuring it is snug but not overtightened.

5. Add New Oil

Remove the oil fill cap and use a funnel to add new oil. Pour in approximately 3.6 quarts of 10W-40 ATV oil. Check the oil level with the dipstick and add more if necessary, ensuring not to overfill.

6. Reattach the Skid Plate

Once the oil is at the correct level, reattach the skid plate using the socket wrench to secure the bolts.

7. Check for Leaks

Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug. If there are no leaks, your oil change is complete.

Important Notes for the 2010 Suzuki King Quad 750AXi 4X4

The 2010 Suzuki King Quad 750AXi 4X4 is known for its robust performance and reliability. Regular maintenance, including timely oil changes, is crucial to keep it running smoothly. Always use the recommended oil type and filter to ensure compatibility and performance. Additionally, check other fluid levels and inspect the ATV for any signs of wear or damage during each oil change.

Related Shopping Categories

Shop Motor Oil for a 2010 Suzuki King Quad 750AXi 4X4 ATV.

Shop Oil Filters for a 2010 Suzuki King Quad 750AXi 4X4 ATV.

Shop Oil Drain Pans for a 2010 Suzuki King Quad 750AXi 4X4 ATV.

Shop Tools for a 2010 Suzuki King Quad 750AXi 4X4 ATV.

Shop Oil Fillers and Drain Plugs for a 2010 Suzuki King Quad 750AXi 4X4 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.