How to Change the Oil in a 1987 Honda ATC125M

Maintaining your 1987 Honda ATC125M is crucial for its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Follow these steps to change the oil in your ATC125M.

Shop parts for a 1987 Honda ATC125M ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket set
  • Drain pan
  • Funnel
  • New oil filter
  • Engine oil (check your manual for the correct type and amount)
  • Rags or paper towels

Steps to Change the Oil

  1. Warm Up the Engine: Start the engine and let it run for a few minutes. This helps the oil drain out smoothly.
  2. Turn Off the Engine: Once warmed up, turn off the engine and ensure the ATV is on a level surface.
  3. Locate the Drain Plug: Find the oil drain plug under the engine. Place the drain pan underneath.
  4. Remove the Drain Plug: Use a socket wrench to remove the drain plug. Allow the old oil to completely drain into the pan.
  5. Replace the Drain Plug: Once the oil has drained, replace and tighten the drain plug securely.
  6. Remove the Old Oil Filter: Use the oil filter wrench to remove the old oil filter. Be cautious as it may still contain oil.
  7. Install the New Oil Filter: Apply a small amount of new oil to the gasket of the new filter. Install the new filter by hand, ensuring it is snug but not overtightened.
  8. Add New Oil: Remove the oil fill cap and use a funnel to add the new oil. Refer to your manual for the correct oil capacity.
  9. Check Oil Level: After adding oil, check the oil level with the dipstick. Add more oil if necessary.
  10. Run the Engine: Start the engine and let it run for a few minutes. Check for leaks around the oil filter and drain plug.
  11. Final Check: Turn off the engine and recheck the oil level. Top off if needed.

Important Notes for the 1987 Honda ATC125M

The 1987 Honda ATC125M is a classic model known for its durability and performance. When changing the oil, always ensure you use the correct type and amount of oil as specified in the owner's manual. Regular maintenance, including oil changes, will help keep your ATV running smoothly for years to come.

Remember, proper disposal of used oil is essential. Take the old oil to a recycling center or an auto shop that offers oil disposal services.

Related Shopping Categories

Shop Motor Oil for a 1987 Honda ATC125M ATV.

Shop Oil Filters for a 1987 Honda ATC125M ATV.

Shop Oil Drain Pans for a 1987 Honda ATC125M ATV.

Shop Tools for a 1987 Honda ATC125M ATV.

Shop Oil Fillers and Drain Plugs for a 1987 Honda ATC125M ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.