How to Change the Oil in a 2020 Can-Am Outlander 450 DPS

Maintaining your 2020 Can-Am Outlander 450 DPS is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before we dive into the step-by-step guide, make sure you have the necessary tools and supplies: an oil filter, the correct type of oil, a wrench, an oil catch pan, and a funnel.

Shop parts for a 2020 Can-Am Outlander 450 DPS ATV.

Step-by-Step Guide to Changing the Oil

  1. Warm Up the Engine: Start your ATV and let it run for a few minutes. This helps the oil to flow out smoothly when you drain it.
  2. Position the ATV: Ensure your Outlander is on a level surface and turn off the engine. This prevents any accidental movement and ensures complete drainage.
  3. Remove the Drain Plug: Place the oil catch pan under the engine. Use a wrench to remove the drain plug and allow the old oil to completely drain out.
  4. Replace the Oil Filter: Unscrew the old oil filter and replace it with a new one. Make sure to lubricate the rubber gasket on the new filter with a bit of new oil before installing it.
  5. Install the Drain Plug: Once the oil has fully drained, reinstall the drain plug securely.
  6. Add New Oil: Using a funnel, pour the recommended type and amount of oil into the engine. Check your owner's manual for the specific oil type and capacity.
  7. Check Oil Level: Start the engine and let it run for a minute. Turn it off and check the oil level with the dipstick. Add more oil if necessary.
  8. Dispose of Old Oil: Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.

Important Notes for the 2020 Can-Am Outlander 450 DPS

The 2020 Can-Am Outlander 450 DPS is equipped with a Rotax engine known for its reliability and performance. It's important to use the recommended oil type to maintain the engine's efficiency. Additionally, regularly check the air filter and coolant levels to ensure your ATV runs smoothly. The DPS (Dynamic Power Steering) system provides excellent handling, so keeping up with regular maintenance will ensure it continues to perform at its best.

By following these steps, you can easily change the oil in your 2020 Can-Am Outlander 450 DPS, ensuring it remains in top condition for all your adventures.

Related Shopping Categories

Shop Motor Oil for a 2020 Can-Am Outlander 450 DPS ATV.

Shop Oil Filters for a 2020 Can-Am Outlander 450 DPS ATV.

Shop Oil Drain Pans for a 2020 Can-Am Outlander 450 DPS ATV.

Shop Tools for a 2020 Can-Am Outlander 450 DPS ATV.

Shop Oil Fillers and Drain Plugs for a 2020 Can-Am Outlander 450 DPS ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.