2017 Husqvarna 701 Enduro Torque Specs: Fastener Reference for the Adventure Single
Shop parts for a 2017 Husqvarna 701 Enduro Dirt Bike.
The 2017 Husqvarna 701 Enduro refines the platform introduced in 2016 with updated fueling calibration and detail improvements that address first-year owner feedback. The 692cc fuel-injected single-cylinder engine and WP Xplor suspension remain the core of the machine—a capable adventure-enduro bike that covers serious ground on or off pavement. Torque specifications for the 2017 are consistent with the 2016 across all major fastener groups.
Drivetrain & Wheel Torque
The 701 Enduro's mix of road and trail use places varied loads on wheel and drivetrain hardware. Road miles create sustained chain tension; trail use adds impact and vibration. Together, they make chain adjuster lock nut torque and axle nut torque particularly important to verify regularly.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Front axle nut | 36–43 | 49–58 |
| Rear axle nut | 54–61 | 73–83 |
| Rear sprocket bolts | 22–29 | 30–39 |
| Chain adjuster lock nuts | 18–22 | 24–30 |
Engine Fasteners
The 2017 701 Enduro's fuel injection calibration update did not change any engine fastener specifications from 2016. Oil changes are the most routine maintenance task on this fuel-injected single, and the drain bolt should receive a fresh sealing washer at every change to protect the aluminum case boss.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Spark plug | 15–18 | 20–25 |
| Oil drain bolt | 22–26 | 30–35 |
| Cylinder head bolts (10mm) | 36–40 | 49–54 |
| Cylinder base nuts | 22–26 | 30–35 |
| Flywheel nut | 54–61 | 73–83 |
| Clutch hub nut | 54–61 | 73–83 |
Suspension, Chassis & Brakes
The 2017 701 Enduro's WP Xplor suspension hardware and chassis pivot specifications are unchanged from 2016. Street-legal brake system maintenance should include checking disc bolt torque at every tire change and verifying caliper bracket hardware at every brake pad replacement.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Fork clamp bolts — upper triple clamp | 15–19 | 20–26 |
| Fork clamp bolts — lower triple clamp | 15–19 | 20–26 |
| Handlebar clamp bolts | 18–22 | 24–30 |
| Swingarm pivot bolt | 54–61 | 73–83 |
| Rear shock upper mount | 36–43 | 49–58 |
| Rear shock lower mount | 36–43 | 49–58 |
| Shock linkage bolts | 36–43 | 49–58 |
| Front caliper mounting bolts | 22–26 | 30–35 |
| Front brake disc bolts | 14–17 | 19–23 |
| Rear caliper mounting bolts | 22–26 | 30–35 |
| Rear brake disc bolts | 14–17 | 19–23 |
Related Shopping Categories
Shop Torque Wrenches for a 2017 Husqvarna 701 Enduro Dirt Bike.
Shop Wrenches and Sockets for a 2017 Husqvarna 701 Enduro Dirt Bike.
Shop Thread Locker for a 2017 Husqvarna 701 Enduro Dirt Bike.
Shop Additional Tools for a 2017 Husqvarna 701 Enduro Dirt Bike.
Shop Penetrating Oil for a 2017 Husqvarna 701 Enduro Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
