2009 Honda CRF150F Torque Specs
Shop parts for a 2009 Honda CRF150F Dirt Bike.
The 2009 Honda CRF150F offers a familiar and approachable four-stroke trail experience built around a 149cc air-cooled OHC engine. At this point in the model's run, the CRF150F was a well-understood platform with a solid track record among intermediate trail riders. Servicing the 2009 model follows the same fundamental approach as earlier years, with torque specifications that apply across the engine, suspension, drivetrain, and brake systems.
Suspension & Linkage Torque
Starting with the chassis gives a good overview of what's involved in a full service. The 2009 CRF150F runs a conventional front fork and Pro-Link rear suspension—both systems require periodic attention to linkage bearings, clamp hardware, and pivot hardware.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Fork top clamp bolts | 11–15 ft-lb | 15–20 Nm |
| Fork bottom clamp bolts | 11–15 ft-lb | 15–20 Nm |
| Handlebar clamp bolts | 11–15 ft-lb | 15–20 Nm |
| Swingarm pivot nut | 43–54 ft-lb | 59–74 Nm |
| Rear shock upper mount | 22–29 ft-lb | 30–39 Nm |
| Rear shock lower mount | 22–29 ft-lb | 30–39 Nm |
| Linkage rod bolts | 29–36 ft-lb | 39–49 Nm |
Engine Fasteners
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Spark plug | 10–13 ft-lb | 14–18 Nm |
| Oil drain bolt | 18–22 ft-lb | 25–30 Nm |
| Cylinder head bolts | 14–18 ft-lb | 20–25 Nm |
| Valve cover bolts | 6–8 ft-lb | 8–11 Nm |
| Cam sprocket bolt | 14–17 ft-lb | 19–23 Nm |
| Flywheel nut | 36–43 ft-lb | 49–59 Nm |
| Clutch hub nut | 29–36 ft-lb | 39–49 Nm |
Drivetrain & Wheel Hardware
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Front axle nut | 29–36 ft-lb | 39–49 Nm |
| Rear axle nut | 36–43 ft-lb | 49–59 Nm |
| Rear sprocket nuts | 22–29 ft-lb | 30–39 Nm |
| Chain adjuster lock nuts | 11–15 ft-lb | 15–20 Nm |
Brake System
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Rear brake caliper bolts | 18–22 ft-lb | 25–30 Nm |
| Rear brake disc bolts | 11–15 ft-lb | 15–20 Nm |
Frame & Engine Mounts
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Engine upper mount bolt | 29–36 ft-lb | 39–49 Nm |
| Engine lower mount bolt | 29–36 ft-lb | 39–49 Nm |
| Subframe bolts | 18–22 ft-lb | 25–30 Nm |
For the 2009 CRF150F, sticking to these torque values during every service interval is the most reliable way to keep the bike in top condition and avoid the kind of gradual fastener fatigue that leads to larger problems down the trail.
Related Shopping Categories
Shop Torque Wrenches for a 2009 Honda CRF150F Dirt Bike.
Shop Wrenches and Sockets for a 2009 Honda CRF150F Dirt Bike.
Shop Thread Locker for a 2009 Honda CRF150F Dirt Bike.
Shop Additional Tools for a 2009 Honda CRF150F Dirt Bike.
Shop Penetrating Oil for a 2009 Honda CRF150F Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.