Why Your 2022 Aprilia Tuono 660 Is Using More Fuel Than It Should

Shop parts for a 2022 Aprilia Tuono 660 Motorcycle.

The 2022 Aprilia Tuono 660 is a liquid-cooled, fuel-injected, four-stroke parallel twin with a chain final drive and a ride-by-wire throttle. That is an efficient combination by design, so when the bike starts emptying its tank faster than it used to, something has changed — in how it is ridden, in its state of tune, or in a component that has drifted out of spec. What follows is a walk through the most common reasons a Tuono 660 owner notices fewer miles between fill-ups, ordered roughly from the free and easy checks to the ones that call for a shop. It is not a repair procedure; it is a map of where to look and what to describe to a mechanic.

Start by Confirming the Drop Is Real

Before chasing a mechanical cause, measure the bike properly. Fill the tank to the same point each time, reset the trip meter or write down the odometer reading, ride normally, then refill and divide the miles ridden by the amount of fuel it took to refill. A single tank proves very little, because one windy commute or one spirited afternoon can skew the result badly. Track three or four consecutive tanks of similar riding before you conclude anything.

It also pays to check whether the numbers themselves are honest. A change in tire size, or a change in sprocket sizes on a chain-driven bike like this one, can throw off the speedometer and odometer, which makes fuel economy look worse than it actually is. If the dash offers a consumption readout, treat it as a trend indicator rather than gospel.

Riding Conditions and Habits That Quietly Cost Fuel

Cold weather is one of the most underrated culprits. A cold engine needs extra fuel to run cleanly, and short winter rides never let the Tuono 660 reach its happy operating temperature. Winter-blend and ethanol-blended fuels also return slightly worse economy than summer gasoline, and the difference is real even if it is modest.

Then there is the way the bike is used. Sustained highway speeds, strong headwinds, a passenger, and loaded luggage all raise the workload. So does aggressive throttle use, and so do long idling warm-ups, which burn fuel while covering zero distance. On a ride-by-wire machine with selectable ride modes, the mode itself matters: a sharper, sportier throttle map delivers the same performance with more fuel burned than a gentler setting used for the same trip.

Rolling Resistance: Tires, Brakes, and the Chain

Underinflated tires are the single most common and most easily fixed cause of a fuel economy slide. Low pressure increases the contact patch and the rolling resistance, and the effect compounds over a long ride. Check pressures cold, with a good gauge, and check them often.

A brake caliper that is dragging will also hold the bike back. After a ride, carefully feel the temperature of each brake disc — a disc that is noticeably hotter than its opposite number suggests a caliper that is not fully releasing. Finally, because the Tuono 660 is chain-driven, inspect the chain. A dry, rusty, or overtightened chain soaks up power and forces more throttle for the same speed.

Air, Spark, and Compression

A clogged or heavily soiled air filter restricts airflow and upsets the mixture, and it is one of the cheapest things to inspect. Spark plugs matter just as much: plugs that are worn, fouled, or gapped incorrectly can fail to ignite the charge completely, which wastes fuel that never produces power. Pull them and read their color — a sooty, black appearance points toward a rich condition rather than normal wear.

Deeper in the engine, low compression from general wear reduces efficiency across the whole rev range. On a parallel twin like this, valve clearances that have tightened out of spec are a common route to that loss, and they are worth having checked once the simpler items have been ruled out.

Fueling Problems on a Fuel-Injected Parallel Twin

Because this bike uses electronic fuel injection rather than carburetors, the causes here look different. The oxygen sensor in the exhaust is what lets the engine management system fine-tune the mixture in closed loop; a lazy or contaminated sensor can push fueling rich. A faulty engine or coolant temperature sensor is another possibility, since it can tell the ECU the engine is colder than it really is and trigger extra enrichment that never gets dialed back.

Injectors can leak or become dirty and deliver more fuel than intended, and on a twin with two throttle bodies, those bodies can drift out of synchronization, which hurts both smoothness and economy. Stored fault codes may point straight at the problem, so a diagnostic scan is often the fastest route. Do not overlook the simple things either: a fuel smell around the bike, or dampness at a line or fitting, means fuel is escaping before it ever gets burned.

Cooling System and Operating Temperature

This is a liquid-cooled machine, so the thermostat is part of the picture. A thermostat stuck open keeps coolant circulating constantly and prevents the engine from reaching full operating temperature. A cold-running engine stays in enrichment longer, burns more fuel, and never delivers its best efficiency. If the temperature gauge sits unusually low on a normal ride, that is worth investigating.

Modifications That Upset the Fueling

An aftermarket exhaust or a high-flow air filter installed without matching electronic tuning is a frequent cause of poor economy on modern fuel-injected bikes. The engine management system has to work with airflow it was not calibrated for, and the result is often uneven fueling that costs mileage and drivability. If the bike was modified recently and the fuel economy dropped around the same time, that timing is a strong clue.

When to Hand the Bike to a Mechanic

Some symptoms point past basic maintenance. A strong fuel smell, black smoke from the exhaust, sooty spark plugs, rough running alongside the mileage drop, or a dashboard warning light if your bike has one all suggest the issue is deeper than tire pressure or a dirty filter. The same is true if the economy stays poor after you have corrected pressures, replaced the air filter, serviced the chain, and fitted fresh plugs.

When you bring the Tuono 660 in, describe what you have observed rather than guessing at the cause: when the drop started, whether it followed a modification or a service, how the bike runs when cold versus warm, and whether any warning light has appeared. That kind of detail gives a technician a real head start and usually shortens the path to an answer.

Related Shopping Categories

Shop Fuel System Parts for a 2022 Aprilia Tuono 660 Motorcycle.

Shop Air Filters for a 2022 Aprilia Tuono 660 Motorcycle.

Shop Tires for a 2022 Aprilia Tuono 660 Motorcycle.

Shop Brake Parts for a 2022 Aprilia Tuono 660 Motorcycle.

Shop Spark Plugs for a 2022 Aprilia Tuono 660 Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.