Why Your 2019 Honda Africa Twin CRF1000L May Be Using More Fuel Than It Should

Shop parts for a 2019 Honda Africa Twin Motorcycle.

The 2019 Africa Twin is a 998cc parallel-twin four-stroke with Honda's PGM-FI fuel injection, liquid cooling, and a chain final drive. That configuration matters a great deal when you start hunting for a fuel economy complaint, because it rules out an entire category of causes. There is no choke to leave partially engaged, no float bowl to stick, and no jets to gum up. What you are left with is a mix of riding conditions, wear items, and electronic or mechanical faults that can push the engine rich. The list below is ordered roughly the way it makes sense to work through, starting with the free checks and moving toward the ones that need tools or a shop.

Before Anything Else, Confirm the Change Is Real

Plenty of riders notice they are stopping for fuel more often without ever measuring anything, and that gut feeling is usually right — but it is worth confirming. Fill the tank to a consistent level, reset your trip meter or write down the odometer reading, ride normally for a full tank, then refill to the same level and divide the distance ridden by the fuel you added. A single tank proves very little, because a windy day, a heavy throttle hand, or a lot of city traffic can swing the result noticeably. Track three or four consecutive tanks before you conclude anything.

One thing that fools a lot of owners: changes to gearing or tire size. If you have fitted a different rear sprocket, changed the front sprocket, or moved to a tire with a different circumference, your speedometer and odometer will no longer be accurate. The bike is not necessarily burning more fuel — the numbers you are dividing may simply be wrong. Keep that in mind before you start chasing a mechanical fault.

Riding Conditions and Habits That Quietly Cost Fuel

Cold weather is one of the most common culprits and one of the least mechanical. A cold engine needs a richer mixture to run cleanly, and short winter rides that never let the bike reach full operating temperature keep it in that rich state far longer than a summer commute would. Winter-blend and ethanol-blended fuels also tend to return slightly worse economy than summer fuel, and that is normal rather than a fault.

Your right hand matters just as much. Aggressive acceleration, sustained high-speed highway running, a headwind, a passenger, and fully loaded luggage all increase the load the engine is working against. Long idle warm-ups are another quiet thief — the bike is burning fuel while covering zero distance. If your riding has shifted toward shorter trips, more stop-and-go traffic, or more highway miles at elevated speed, some drop in economy is simply the physics of the situation.

Rolling Resistance, Drag, and Chain Condition

Underinflated tires are the single most overlooked cause of poor fuel economy on any motorcycle, and they cost nothing to check. Low pressure increases rolling resistance, and it also wears the tire faster and dulls steering response. Check pressures cold, with a good gauge, and check them regularly rather than once a season.

A dragging brake is the next thing to rule out. On the Africa Twin you have disc brakes front and rear, so listen for a caliper that is not releasing fully, feel for a wheel that is unusually hot after a ride, or spin the wheel with the bike on a stand and see whether it turns freely. A caliper with sticky pistons or a corroded slide will drag continuously and cost you fuel on every mile.

Because this bike is chain driven, the final drive deserves attention too. A dry, rusty, or over-tightened chain soaks up power that should be reaching the rear wheel. Clean it, lubricate it, and set the slack to spec. A chain that has been neglected for a long time may simply need replacing along with the sprockets.

Air Filter and Spark Plugs

A clogged air filter restricts airflow, and the fuel injection system responds by delivering a mixture that is richer than the engine actually wants. If you ride in dusty conditions or on gravel regularly, the filter can load up faster than you would expect. Inspect it and replace it if it is visibly dirty or the element is deteriorating.

Spark plugs are the other half of that equation. Worn, fouled, or incorrectly gapped plugs produce incomplete combustion, which wastes fuel and often shows up as slightly rough running before it shows up as anything else. Pull them and read them — a sooty black appearance points toward a rich condition, while normal wear just means it is time for a fresh set.

Fuel Injection Faults That Can Push the Mixture Rich

This is where the Africa Twin's fuel injection system comes into play, and it is also where a diagnostic scan earns its keep. The engine management system relies on sensor feedback to calculate how much fuel to deliver, and a sensor that reports the wrong conditions will cause the wrong mixture.

  • Oxygen sensor degradation. The system uses exhaust oxygen content to fine-tune fueling. A lazy or contaminated sensor can bias the mixture rich without ever setting an obvious symptom beyond the mileage drop.
  • Engine or coolant temperature sensor faults. If the sensor tells the ECU the engine is colder than it really is, the system adds fuel for a cold-start condition that is not actually happening. This is a classic cause of a persistent rich running condition.
  • Leaking or dirty injectors. An injector that does not seal properly dribbles fuel, and one that is partially clogged sprays poorly. Both hurt economy and both can cause rough running.
  • Throttle body synchronization. On a parallel twin, the two throttle bodies need to be balanced. When they drift apart, one cylinder does more than its share of the work and overall efficiency suffers.
  • Stored fault codes. Even if no warning light is showing, a scan can reveal pending codes that explain the fuel consumption.
  • Fuel leaks. A weeping line, a loose fitting, or a seeping connection is fuel you paid for that never reaches the combustion chamber. Smell around the bike after it has sat.

Engine Health, Cooling, and Modifications

As mileage accumulates, compression drops. Worn rings and valve sealing losses reduce the engine's thermal efficiency, so it takes more fuel to produce the same output. A compression or leak-down test is the way to confirm this, and it is worth doing if the basic checks come back clean.

Because the Africa Twin is liquid cooled, the thermostat is worth a mention. A thermostat stuck open keeps the engine from reaching full operating temperature, and a cold-running engine stays in a rich warm-up strategy far longer than it should. If the temperature gauge or display never seems to come up to normal, that is a clue.

Finally, consider modifications. An aftermarket exhaust or a high-flow air filter installed without matching fuel tuning will lean out or richen the mixture in ways the stock calibration was never written for. If the mileage drop started right after a bolt-on part went on, that is your answer.

When It Is Time to See a Mechanic

Some symptoms point to something deeper than a dirty filter or a soft tire. A strong fuel smell, black smoke from the exhaust, sooty spark plugs, rough running alongside the mileage drop, or a dashboard warning light if your bike is equipped with one all justify handing the bike over. So does a fuel economy drop that persists after you have corrected tire pressure, chain condition, and the air filter. Bring your tank-to-tank notes with you — a mechanic can do far more with real numbers than with a vague sense that the bike feels thirsty.

Related Shopping Categories

Shop Fuel System Parts for a 2019 Honda Africa Twin Motorcycle.

Shop Air Filters for a 2019 Honda Africa Twin Motorcycle.

Shop Tires for a 2019 Honda Africa Twin Motorcycle.

Shop Brake Parts for a 2019 Honda Africa Twin Motorcycle.

Shop Spark Plugs for a 2019 Honda Africa Twin Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.