Why Your 2017 Honda Africa Twin DCT May Be Using More Fuel Than It Should

Shop parts for a 2017 Honda Africa Twin DCT Motorcycle.

The 2017 Honda CRF1000L Africa Twin DCT is a liquid-cooled, fuel-injected 998cc parallel twin with a chain final drive and fully electronic ignition. That configuration shapes everything below: there is no carburetor to flood, no choke to leave partly engaged, and no ignition points to wear. When a bike like this begins using noticeably more fuel than it used to, the cause is usually found in airflow, sensor input, mechanical drag, or simply how the bike is being ridden and loaded.

First, Confirm the Change Is Real

Before chasing a mechanical cause, make sure the drop is genuine. The reliable method is tank-to-tank: fill to the same level each time, reset the trip meter or note the odometer, ride normally, then refill and divide the distance ridden by the fuel the tank accepted. A single tank proves very little, since one fill can be short and one ride can be unusually windy or fast. Track three or four consecutive tanks before drawing conclusions.

Also consider whether anything has changed the odometer's accuracy. A different rear tire size, or a sprocket change on this chain-driven bike, alters the relationship between actual distance traveled and what the odometer reports, making fuel economy look worse than it is. If you simply notice you are fueling more often, that is a valid observation too — just let a few tanks confirm it.

Riding Conditions, Weather, and Fuel Blends

Cold weather is one of the most common non-mechanical explanations. A cold engine needs a richer mixture to run smoothly, and short winter rides that never let the engine reach full operating temperature keep it in that richer state. Winter-blend and ethanol-blended fuels can also return slightly fewer miles per tank than summer fuel.

Beyond weather, look at how the bike is used. Sustained highway speeds push a tall, upright adventure bike through a great deal of air resistance, and a headwind compounds it. Adding a passenger, loaded panniers, or a large top box increases both weight and drag. Aggressive throttle use, long idling warm-ups, and a string of very short trips all burn fuel without covering much distance. On a DCT model, transmission mode matters as well: spending most of your time in a sportier setting or in manual mode with the engine held at higher rpm will use more fuel than letting the bike shift early in its most economical automatic mode.

Rolling Resistance and Drag

Underinflated tires are the classic culprit and cost nothing to check. Low pressure increases rolling resistance, so check both tires cold against the pressure appropriate for your load. Next, feel the wheels after a ride: a dragging brake caliper leaves one disc noticeably hotter than the other, and a partially seized caliper or sticking piston keeps the pads in contact with the rotor.

On this chain-driven bike, the final drive deserves attention too. A chain that is dry, rusty, or adjusted too tight robs power and forces the engine to work harder for the same speed, so lubricate it, check the slack, and confirm the rear wheel is aligned. Finally, consider bolt-on drag — a large windscreen, wide hand guards, or bulky luggage all add aerodynamic resistance at speed.

Air Intake, Spark, and Combustion Quality

A clogged or heavily oiled air filter restricts incoming air, and the engine management system compensates in ways that can hurt efficiency. Inspect the filter and clean or replace it as its type requires. Spark plugs matter just as much: plugs that are worn, fouled, or gapped incorrectly may fail to ignite the mixture cleanly, so some fuel leaves the engine unburned.

Pull the plugs and read them — a sooty black appearance points toward a rich condition, while normal wear shows as an eroded electrode and a widened gap. Because this bike uses a fully electronic ignition, there are no contact points to wear and no timing to drift, so you can rule that out entirely.

Fuel Injection and Sensor Issues

On a fuel-injected machine, the system decides how much fuel to deliver based on sensor input, so a sensor reporting the wrong conditions produces the wrong mixture. An oxygen sensor that has aged or become contaminated can bias the mixture rich. An engine coolant temperature sensor that tells the ECU the engine is colder than it actually is will keep the mixture enriched long after warm-up.

Dirty or leaking injectors deliver uneven and sometimes excessive fuel, and a leaking injector can also cause a strong fuel smell or rough running. This parallel twin uses more than one throttle body, so if they drift out of synchronization the cylinders will not share the load evenly, which shows up as rough running and higher consumption. Stored fault codes are worth checking, since a fault can be logged without an obvious symptom. Do not overlook the simple possibility of an external fuel leak at a hose, fitting, or the tank itself.

Engine Condition, Cooling, and Modifications

General engine wear reduces efficiency. As compression drops from worn rings or poor valve sealing, the engine produces less power for the same fuel, so you use more throttle to hold your pace; a compression check confirms it. Because this bike is liquid-cooled, the thermostat is also in play. A thermostat stuck open prevents the engine from reaching full operating temperature, keeping the mixture richer than it should be and hurting fuel economy, especially in cool weather.

Modifications are another frequent cause. Fitting an aftermarket exhaust or a high-flow air filter without matching fuel-injection tuning can leave the engine running rich across the range. If consumption changed right after a modification, that timing is a strong clue.

When It Is Time to See a Mechanic

Some symptoms point to something beyond routine maintenance. A persistent strong fuel smell, black smoke from the exhaust, spark plugs that come out sooty again shortly after replacement, a dashboard warning light if your bike has one, or rough running that appeared alongside the mileage drop all justify professional diagnosis. The same is true if you have checked tire pressure, the chain, the air filter, and the plugs and consumption is still high.

When you bring the bike in, describe what changed and when: how many tanks you tracked, whether the drop followed a modification or a service, whether the bike runs differently, and whether any warning light has appeared. That context helps a technician narrow the search quickly rather than starting from scratch.

Related Shopping Categories

Shop Fuel System Parts for a 2017 Honda Africa Twin DCT Motorcycle.

Shop Air Filters for a 2017 Honda Africa Twin DCT Motorcycle.

Shop Tires for a 2017 Honda Africa Twin DCT Motorcycle.

Shop Brake Parts for a 2017 Honda Africa Twin DCT Motorcycle.

Shop Spark Plugs for a 2017 Honda Africa Twin DCT Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.