Why Your 2016 Honda Africa Twin DCT Is Using More Fuel Than It Should

Shop parts for a 2016 Honda Africa Twin DCT Motorcycle.

The 2016 Honda Africa Twin DCT is a 998cc parallel-twin four-stroke with liquid cooling, electronic fuel injection, and chain final drive. That configuration shapes everything that follows, because it rules out an entire category of causes. There is no carburetor to leave a choke partly closed, no float bowl to stick, and no jets to gum up. What you are working with instead is a computer-controlled fuel system that depends on accurate sensors, clean injectors, a healthy intake and ignition system, and a drivetrain that rolls freely. The dual-clutch transmission adds one variable a manual bike does not have: the shift mode you ride in changes how long the engine holds each gear, and that alone can move your fuel use noticeably.

If you are simply stopping for fuel more often than you used to, or a familiar route now takes more fuel than it once did, most of the likely causes are findable without tearing the bike apart. Work through them in the order below, starting with the free checks.

Confirm the Drop Is Real Before Chasing It

Fill the tank to the same level each time, note the odometer or reset the trip meter, ride normally, then refill and divide the distance covered by the fuel you added. A single tank proves very little, because temperature, wind, and how full you actually got the tank all skew the result. Average several tanks before you conclude anything.

One easy way to fool yourself is a change in gearing or tire size. Fitting a different rear sprocket, or moving to a tire with a different circumference, alters what the speedometer and odometer report. The bike may be burning the same fuel while the numbers suggest otherwise. If you have made either change recently, factor that in before you start diagnosing.

Riding Conditions and Habits That Quietly Cost Fuel

Cold weather is a common culprit. The engine runs richer while it warms up, cold air is denser, and winter-blend or heavily ethanol-blended fuel carries less energy per gallon. Headwinds, sustained highway speeds, a passenger, and loaded luggage all increase the work the engine must do. Short trips where the engine never reaches full temperature, and long idling warm-ups, are especially wasteful.

Your right hand matters too, and so does the DCT. Riding in a sportier mode or in manual mode holds gears longer and keeps revs higher than the default automatic setting. If your mileage dropped right after you changed how you ride, that may be the whole story.

Rolling Resistance and Drivetrain Drag

Check tire pressures cold, front and rear, and top them up to the specification for your load. Underinflation is the single most common and most easily corrected cause of a fuel economy slide, and it also wears tires faster.

A dragging brake caliper is next. After a ride, carefully feel the front discs; a disc that is noticeably hotter than the other points to a caliper that is not releasing fully. Because this bike is chain-driven, the chain deserves attention as well. A dry, rusty, or overtightened chain absorbs power that the engine has to make up for, and worn sprockets do the same. Clean, lubricate, and set chain slack correctly, and check that the rear wheel is aligned.

Air Intake and Ignition Health

A clogged or heavily soiled air filter restricts airflow and upsets the mixture the fuel injection system is trying to maintain. If you ride in dusty conditions, inspect it more often than you might expect.

Spark plugs are the other half of this picture. Plugs that are worn, fouled, or gapped incorrectly can fail to burn the mixture completely, which wastes fuel and often shows up as rough running. When you pull them, read their color — sooty black plugs suggest a rich condition worth investigating further, while normal plugs point you toward other causes.

Fuel Injection and Sensor Problems

On a fuel-injected machine, the engine management system decides how much fuel to deliver based on what its sensors tell it. An oxygen sensor in the exhaust that has drifted or failed can push the system toward a richer mixture than the engine needs. A faulty engine coolant temperature sensor is another frequent offender: if it reports that the engine is colder than it actually is, the system keeps adding extra fuel as though the bike were still warming up.

Injectors can become dirty or leak, delivering more fuel than intended or spraying poorly. On this parallel twin, the throttle bodies can also drift out of synchronization, which hurts both smoothness and efficiency. Stored fault codes may already be waiting in the system, so having them read is a fast way to narrow things down. Finally, look for any fuel leak — a damp fitting, a weeping line, or a persistent fuel smell.

Engine Condition and Cooling

General engine wear reduces efficiency. If compression is low because of worn rings or valves that are out of adjustment, the engine simply does not convert fuel into forward motion as effectively as it once did, and you compensate with more throttle.

Because this bike is liquid-cooled, the thermostat is worth a thought. A thermostat stuck open keeps the engine from reaching full operating temperature, and a cold-running engine stays in its enrichment phase far longer than it should.

Modifications That Were Never Tuned For

An aftermarket exhaust or a high-flow air filter installed without matching fuel injection tuning is a classic cause of a rich-running bike. More airflow without a corresponding correction to fueling can leave the mixture off, and the result is often a drop in fuel economy along with a change in how the bike runs.

When It Is Time to See a Mechanic

Some symptoms point to something deeper than a maintenance item. A strong, persistent fuel smell, black smoke from the exhaust, sooty spark plugs, rough running alongside the mileage drop, or a dashboard warning light if your bike has one all justify handing the bike over. The same goes for a fuel economy drop that survives the basic checks — fresh tires pressures, a clean filter, good plugs, and a properly adjusted chain. Describe what you have observed, when it started, and what you have already checked, and a good technician can take it from there.

Related Shopping Categories

Shop Fuel System Parts for a 2016 Honda Africa Twin DCT Motorcycle.

Shop Air Filters for a 2016 Honda Africa Twin DCT Motorcycle.

Shop Tires for a 2016 Honda Africa Twin DCT Motorcycle.

Shop Brake Parts for a 2016 Honda Africa Twin DCT Motorcycle.

Shop Spark Plugs for a 2016 Honda Africa Twin DCT Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.