Why Your 2014 MV Agusta Turismo Veloce Lusso 800 Is Using More Fuel Than It Should

Shop parts for a 2014 MV Agusta Turismo Veloce Lusso 800 Motorcycle.

The 2014 MV Agusta Turismo Veloce Lusso 800 is a liquid-cooled, fuel-injected, four-stroke three-cylinder sport-tourer with chain final drive and electronic ignition. That configuration shapes everything that follows, because the usual suspects on a modern fuel-injected machine differ from those on an older carbureted bike. There is no choke to leave partly engaged and no float bowl to overflow. The causes tend to hide in sensor readings, injector behavior, intake and exhaust flow, and how the bike is ridden and maintained.

First, Make Sure the Drop Is Genuine

Before chasing a mechanical fault, measure fuel economy properly. Fill the tank to a consistent level, reset the trip meter or note the odometer reading, ride normally, then refill at the same pump and record how much fuel went in. Divide the distance covered by the fuel added. A single tank proves very little, since temperature, wind, and traffic can swing one fill-up noticeably. Track three or four consecutive tanks and watch the trend instead.

It is also worth asking whether the bike is using more fuel or simply reporting it differently. A different rear tire profile, or a change in sprocket sizes on this chain-driven machine, alters the relationship between engine speed and road speed and skews the speedometer and odometer. If the odometer under-reports distance, your calculated economy looks worse even though nothing in the engine has changed.

Riding Conditions and Habits That Quietly Cost Fuel

Not every mileage drop is a fault. Cold air is denser, so the engine management system adds fuel to match, and cold-weather riding means longer warm-ups and more time on a rich cold-start map. Winter-blend and ethanol-blended fuels can reduce the energy content per gallon as well.

Rider behavior matters just as much. Sustained high-speed highway running, a headwind, a passenger, and loaded luggage all raise the power needed to hold speed. So does aggressive throttle use — this triple rewards revs, and riding it hard will always cost fuel. Short trips are another common culprit, because the engine never reaches full operating temperature and spends a disproportionate share of every ride in its enrichment phase. Long idling warm-ups burn fuel while covering zero distance.

Rolling Resistance, Brakes, and the Drive Chain

Start with tire pressure, because it is free to check and surprisingly influential. Underinflated tires increase rolling resistance, and a soft tire on a loaded sport-tourer can measurably drag down economy. Check both tires cold and set them to the pressure you normally run.

Next, spin the wheels and feel for drag. A brake caliper that is not fully releasing — often from corrosion or a sticking piston — keeps the pads in light contact with the rotor and forces the engine to work against it constantly. A rear brake adjusted too tight does the same thing.

Finally, look at the chain. A dry, rusty, or overtightened chain robs power and adds friction throughout the drivetrain. Clean it, lubricate it, and set the slack correctly.

Air Intake and Ignition Quality

A clogged air filter restricts incoming air, and the engine management system responds in ways that can leave combustion less efficient than it should be. If the filter has not been changed in a long time, or the bike has been ridden in dusty conditions, replace it.

Spark plugs deserve the same attention. Plugs that are worn, fouled, or gapped incorrectly can fail to ignite the mixture cleanly, so some of the fuel you paid for leaves the engine unburned. Pull them and read their condition: dark, sooty deposits point toward a rich mixture, while heavy wear suggests they are simply past their useful life.

Fuel Injection and Sensor Problems

On a fuel-injected machine like this one, the system relies on sensor feedback to decide how much fuel to deliver. If the oxygen sensor, where fitted, becomes slow or contaminated, the system can lose its ability to fine-tune the mixture and drift rich. An engine or coolant temperature sensor that reports a colder engine than reality has a similar effect — the bike behaves as though it is permanently warming up and adds fuel accordingly.

Injectors are another possibility. A dirty or partially clogged injector sprays poorly, and a leaking one dribbles fuel when it should be closed. Because this is a multi-cylinder engine with more than one throttle body, synchronization matters too: throttle bodies that have drifted out of balance cause uneven cylinder filling, and the system compensates with extra fuel. Stored fault codes can point directly at a sensor problem. And do not overlook the simple answer — a weeping fuel line, fitting, or tank seal wastes fuel without it ever reaching the combustion chamber.

Engine Condition, Cooling, and Modifications

General engine wear reduces efficiency. As compression drops from worn rings or poor valve sealing, the engine produces less power for the same fuel, so you open the throttle further to hold the same pace. A compression check confirms whether this is happening.

Because this bike is liquid-cooled, the thermostat is worth a mention. A thermostat stuck open keeps the engine from reaching full operating temperature, and a cold engine runs richer than a warm one. If the temperature reading sits unusually low on a normal ride, that is a clue.

Modifications can be the source as well. An aftermarket exhaust or high-flow air filter fitted without matching fuel injection tuning changes how the engine breathes, and the stock calibration may no longer deliver the right mixture. The result is often a rich condition that costs fuel and leaves sooty deposits behind.

When to Hand the Bike to a Mechanic

Some symptoms point to something beyond routine maintenance. A strong fuel smell, black smoke from the exhaust, spark plugs that come out heavily sooted, a warning light on the dash if your bike has one, or rough running alongside the mileage drop all suggest the mixture is genuinely wrong rather than simply thirsty.

If you have checked tire pressure, the chain, the air filter, and the plugs, and fuel economy is still worse than it used to be, that is the point to bring it in. Describe what you observed: how many tanks you tracked, how the drop developed, whether the bike runs differently, and what you have already replaced. That information shortens the diagnostic process considerably.

Related Shopping Categories

Shop Fuel System Parts for a 2014 MV Agusta Turismo Veloce Lusso 800 Motorcycle.

Shop Air Filters for a 2014 MV Agusta Turismo Veloce Lusso 800 Motorcycle.

Shop Tires for a 2014 MV Agusta Turismo Veloce Lusso 800 Motorcycle.

Shop Brake Parts for a 2014 MV Agusta Turismo Veloce Lusso 800 Motorcycle.

Shop Spark Plugs for a 2014 MV Agusta Turismo Veloce Lusso 800 Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.