What Type of Oil Does a 2024 Yamaha PW50 Take? Two-Stroke Oil and Gearbox Oil Explained

Shop parts for a 2024 Yamaha PW50 Dirt Bike.

The 2024 Yamaha PW50 is the bike that has introduced generations of kids to riding, and it does that with a 49cc air-cooled two-stroke single, an automatic clutch, and shaft final drive. Because it is a two-stroke, the oil question does not have a single answer. There are two separate lubrication systems on this machine, and each one takes a different fluid. One oil feeds the combustion process through Yamaha’s oil injection system, and a completely separate oil lives in the gearbox that drives the rear wheel. Getting both right is what keeps a PW50 running clean, starting easily, and lasting through multiple young riders.

Two Lubrication Systems, Two Different Fluids

On a four-stroke engine, one sump of oil handles everything — crankshaft, valvetrain, and often the clutch and transmission all share the same fluid. A two-stroke does not work that way. The PW50 burns its lubricating oil along with the fuel, so that oil is consumed continuously and never drained and replaced in the traditional sense. Meanwhile, the gearbox that houses the automatic clutch and drives the shaft to the rear wheel is a sealed unit with its own oil supply that does need periodic changing.

That split is the single most important thing to understand about PW50 oil. If you only ever top off the injection tank, you are covering the top end of the engine but ignoring the transmission. If you only ever change the gearbox oil, you are protecting the drivetrain while the piston runs dry. Both services matter, and they use different products from different parts of the shelf.

What Goes in the Oil Injection Tank

The 2024 PW50 ships with Yamaha’s oil injection system, which means you do not mix oil into the fuel at the pump. Instead, you fill a small reservoir, and a metering pump delivers the correct amount of oil into the intake tract as the engine runs. This is one of the reasons the PW50 is such a friendly first bike — there is no measuring, no ratio jug, and no risk of a parent accidentally running straight gas.

For that reservoir, use a purpose-built two-stroke motorcycle oil. Most modern options in this category are synthetic or semi-synthetic blends engineered to burn cleanly, resist carbon deposits, and keep the exhaust port and spark plug from fouling. Look for oils carrying a JASO FD or ISO-L-EGD rating, which indicate a low-ash, high-detergency formulation suited to air-cooled two-stroke engines. Avoid generic automotive two-cycle oils and outboard-style TC-W3 products; those are blended for water-cooled marine engines that run at very different temperatures and load profiles, and they are not the right choice for a small air-cooled dirt bike engine.

Premix Ratios If the Injection System Is Removed

Some owners delete the injection system, either because a pump failed or because they prefer the simplicity of premix. If your PW50 has been converted, or if you are working on a different two-stroke and want a reference point, common premix ratios generally fall between 32:1 and 50:1. A 32:1 mix is on the richer, more protective end of that range, while 50:1 is leaner and produces less smoke and spooge. Many small-displacement two-strokes in this class are commonly run somewhere in the 32:1 to 40:1 neighborhood.

Ratio matters more than most people expect. Too much oil in the mix leads to heavy carbon buildup, a fouled plug, a clogged exhaust port, and a bike that smokes and stumbles. Too little oil means insufficient lubrication on the cylinder wall and crank bearings, which can end in a seized top end. Because the consequences run in both directions, it is worth confirming the exact figure Yamaha specifies for your machine rather than guessing.

The Gearbox Oil Most Owners Overlook

The PW50’s transmission is a separate, sealed assembly that contains the automatic clutch and the gearing that turns the shaft drive. It needs its own oil, and it needs it changed on a schedule. Most two-stroke dirt bikes in this size class commonly spec a motorcycle-specific gear oil or engine oil in the 10W-30 or 10W-40 range, and the PW50 is generally discussed in those same terms.

Whatever you choose, make sure it is a motorcycle-specific formulation rather than a standard automotive oil. Car oils frequently contain friction modifiers designed to reduce drag in engines with separate dry clutches, and those same additives can cause a wet clutch to slip. A JASO MA or MA2 rated oil avoids that problem entirely. The quantity required is small — commonly cited in the neighborhood of a third of a liter — so it is worth measuring carefully rather than pouring until it looks right, and confirming the exact capacity for your model year.

Why Oil Choice Matters More on a Small Two-Stroke

A 49cc engine works hard relative to its size, and it has very little margin for error. Carbon that builds up from a poor-quality two-stroke oil or an overly rich mix will gradually restrict the exhaust port, rob power, and make the bike harder to start. A fouled plug from the same cause will leave a young rider stranded on the trail. On the gearbox side, the wrong oil shows up as a dragging or slipping automatic clutch, notchy engagement, and accelerated wear on the internal components.

Because the PW50 is often ridden in short bursts at low speed — exactly the kind of use that never fully heats the oil — contamination and moisture buildup happen faster than on a bike that runs wide open for an hour. That makes regular gearbox oil changes more important than the small fluid capacity might suggest.

Confirming the Exact Specification for Your 2024 PW50

The guidance above reflects what is typical and widely accepted for this class of machine, and it will get you on the right product in almost every case. For the precise oil type, the exact gearbox capacity, and the recommended change interval, the owner’s manual that came with your 2024 PW50 is the authoritative source, and a Yamaha dealer can confirm the same details in a minute or two. Treat that as a quick verification step rather than a reason to delay — pick up a quality two-stroke oil and a JASO-rated gear oil, and you will have both lubrication systems on this little bike properly covered.

Related Shopping Categories

Shop Oils and Fluids for a 2024 Yamaha PW50 Dirt Bike.

Shop Oil for a 2024 Yamaha PW50 Dirt Bike.

Shop Air Filters and Oil for a 2024 Yamaha PW50 Dirt Bike.

Shop Transmission for a 2024 Yamaha PW50 Dirt Bike.

Shop Oil Filters for a 2024 Yamaha PW50 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your dirt bike's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.