What Type of Oil Does a 2020 Yamaha PW50 Dirt Bike Take?
Shop parts for a 2020 Yamaha PW50 Dirt Bike.
The PW50 Is a Two-Stroke, and That Shapes Every Oil Decision
The 2020 Yamaha PW50 is a 49cc air-cooled two-stroke, and that single fact drives everything about how you lubricate it. There is no crankcase full of engine oil the way a four-stroke has, no oil filter to swap, and no valve train to protect. Instead, the PW50 relies on oil that is either mixed into the fuel or metered into the intake tract, plus a separate sump of gear oil that bathes the automatic transmission and wet clutch. Understanding that split is the key to answering the oil question correctly, because “what oil does a PW50 take” actually has two answers depending on which system you mean.
Two Separate Lubrication Systems, Two Different Oils
Yamaha equipped the PW50 with an oil injection system, often called Autolube, which draws two-stroke oil from a small tank under the seat and feeds it into the engine through a pump driven by the crankshaft. That means the average PW50 owner never has to measure premix at the pump — you fill the oil tank, fill the gas tank, and the bike handles the mixing ratio on its own. The second system is the transmission, which on the PW50 is a single-speed automatic with a wet clutch and shaft final drive. That gearbox lives in its own sealed case and needs its own lubricant, completely separate from whatever goes in the injection tank. Confusing the two is one of the most common mistakes new PW50 owners make.
What Two-Stroke Oil to Run in the Injection Tank
For the injection system, you want a dedicated two-stroke oil formulated for oil injection, not a premix-only racing oil and certainly not motor oil. Most modern two-stroke oils in this category are synthetic or semi-synthetic blends designed to burn cleanly, resist carbon buildup on the piston crown and exhaust port, and keep the small spark plug from fouling. A JASO FD or ISO-L-EGD rated oil is a solid target because those standards specifically measure detergency and smoke, both of which matter on a 49cc engine that spends a lot of time at low rpm with a young rider aboard. Yamalube 2-S is the factory-branded choice and is widely available, but any reputable injection-rated two-stroke oil will do the job. Avoid outboard-style TC-W3 oil if you can — it is designed for water-cooled marine engines and does not carry the same high-temperature detergency ratings.
Premix Ratios If You Run Pre-Mixed Fuel
Some PW50 owners disable or delete the injection pump, usually after a pump failure or when they want the simplicity of a single fuel can. If you go that route, you are now responsible for the ratio, and the industry-typical range for small two-strokes like this falls between 32:1 and 50:1. A 40:1 mix is a common middle ground that many riders settle on for a stock PW50, though the exact figure you should run depends on the oil you choose and how the bike is jetted. Too little oil means the piston and cylinder run dry under load; too much oil fouls plugs, gums up the exhaust, and makes the bike run rich and smoky. If you are unsure, err slightly toward more oil rather than less, and confirm the recommended ratio for your specific setup before you commit to a batch of fuel.
Gearbox Oil for the Transmission and Wet Clutch
The PW50’s transmission case takes a small quantity of motorcycle-specific gear oil, and the common viscosity range for this class of machine is 10W-30 or 10W-40. Because the clutch is a wet multiplate design that shares the same oil as the gears, you want a lubricant rated JASO MA or MA2 rather than a standard automotive engine oil. Automotive oils frequently contain friction modifiers that let a wet clutch slip, which on a PW50 shows up as a bike that revs but does not pull. A conventional motorcycle gear oil is perfectly adequate here, and many owners run a semi-synthetic for a bit more heat stability. The fill volume is small, so a single bottle lasts several services.
Why the Correct Oil Matters on a Small Two-Stroke
Small displacement two-strokes are less forgiving of poor lubrication than their larger cousins because they run hot relative to their size and often operate at part throttle for long stretches. The wrong injection oil or a lean premix can score a cylinder, seize a piston, or foul the plug within a single afternoon of riding. On the gearbox side, the consequences are slower but just as real: clutch slip, notchy engagement, and accelerated gear wear. Using the right fluids is cheap insurance on a bike that is otherwise extremely simple to maintain.
Confirming the Exact Specification for Your PW50
The guidance above reflects what is typical for the PW50 and for small two-stroke minis generally, and it will get you riding confidently. For the precise injection oil recommendation, the exact premix ratio if you have deleted the pump, and the specific gearbox oil viscosity and fill quantity, check the owner’s manual that came with your 2020 PW50 or ask a Yamaha dealer. That is a two-minute confirmation, not a reason to delay a service, and it locks in the last few details that general guidance cannot cover.
Related Shopping Categories
Shop Oils and Fluids for a 2020 Yamaha PW50 Dirt Bike.
Shop Oil for a 2020 Yamaha PW50 Dirt Bike.
Shop Air Filters and Oil for a 2020 Yamaha PW50 Dirt Bike.
Shop Transmission for a 2020 Yamaha PW50 Dirt Bike.
Shop Oil Filters for a 2020 Yamaha PW50 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your dirt bike's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.