What Oil Does a 2020 Polaris Sportsman 570 EPS Take?
Shop parts for a 2020 Polaris Sportsman 570 EPS ATV.Engine Oil Viscosity for the Sportsman 570 EPS
The 2020 Polaris Sportsman 570 EPS is a four-stroke utility ATV, so it uses engine oil rather than two-stroke premix. For this class of machine, the most common viscosity recommendation is a 5W-50 synthetic, and Polaris has historically specified a 5W-50 oil for the 570 engine family. You will also see 10W-40 cited as a general utility ATV weight, and some temperature-specific charts list 0W-40 for extreme cold or 20W-50 for very hot conditions. A 5W-50 multigrade is a strong all-around choice because it flows well on cold starts while maintaining viscosity under load and heat. The exact viscosity can vary by year, market, and any updates to the owner’s manual, so the final confirmation should come from your specific machine’s documentation.
Why the CVT and 4x4 Layout Matters for Oil Choice
The Sportsman 570 EPS uses a continuously variable transmission, often called a CVT or PVT, with a belt that runs dry and separate from the engine oil. That means you do not need a JASO MA or MA2 oil for wet-clutch compatibility the way you would on a manual or semi-automatic ATV that shares engine oil with the clutch. Even so, a powersports-specific four-stroke oil is still the better choice than a typical automotive oil. The engine in this machine works at high rpm, sees heat, and may spend long periods at low speed under load, so an oil designed for powersports use offers the right additive package and shear stability. Because this is a 4x4 model, the engine oil is only one of several lubricants on the machine.
Other Drivetrain Fluids on a 4x4 Sportsman
A 4x4 utility ATV like the 2020 Sportsman 570 EPS typically has a separate front differential, a rear gearcase or final drive, and a transmission gearcase that uses its own lubricant. These are serviced separately from the engine oil, and they usually call for a hypoid gear oil such as 80W-90, or a model-specific front drive fluid where the front differential uses a special engagement system. Using the wrong fluid in a front differential with an engagement system can affect how smoothly 4WD engages, so it is worth checking the correct specification before topping off or changing those fluids. The transmission gearcase on this model is also separate from the engine sump, which is another reason not to assume that one oil covers the whole machine. If you are working on a 2WD version of a similar utility ATV, the rear gearcase or final drive is the main drivetrain fluid to check, but this EPS model is a 4x4.
How Hard Work Changes Oil Demands
Work use is harder on oil than casual trail riding. Towing, plowing, hauling heavy loads, crawling through mud, and crossing water all put extra stress on the engine and drivetrain. Slow-speed heavy loads and long idle periods can also raise oil temperature and promote contamination. Water or mud intrusion is a particular concern on a utility ATV, and a milky appearance in the oil is a common sign that moisture has entered the system. Cold-weather use is another reason to pay attention to the first number in a multigrade oil, because a lower number like 5W or 0W flows more easily at startup. If your Sportsman 570 EPS sees frequent hard work or wet conditions, plan on checking the oil more often and changing it sooner than you would for light recreational use.
Synthetic vs. Conventional Oil
Synthetic oil generally offers better cold-start flow and better stability under high heat, which makes it a good fit for a hard-working utility ATV. Conventional oil is often more affordable and can still be suitable for many owners, especially if the machine is used lightly and the oil is changed on a reasonable schedule. For the 2020 Sportsman 570 EPS, a synthetic 5W-50 is the most commonly cited choice, and it gives you a wide operating range without needing to switch weights between seasons. A semi-synthetic can be a middle ground, but the key is to use the correct viscosity and a powersports-specific formulation rather than an automotive oil that may not be designed for this engine’s demands.
Oil Change Frequency and Severe Service
There is no single oil change interval that fits every rider, because the right schedule depends on how the machine is used. Heavy towing, plowing, mud, dust, and frequent water crossings all fall under severe service and generally call for more frequent oil changes. Short trips in cold weather can also be harder on oil because the engine may not reach full operating temperature long enough to burn off moisture. A clean oil supply is especially important on a utility ATV that spends time at low speed under load, since that is when heat and contamination build up. Use the owner’s manual as your baseline, then shorten the interval if your riding or working conditions are consistently tough.
Confirming the Exact Spec for Your 2020 Sportsman 570 EPS
The most reliable way to confirm the exact engine oil viscosity, oil quantity, and drivetrain fluid types for your specific 2020 Sportsman 570 EPS is to check the owner’s manual or ask a Polaris dealer. This is a quick confirmation step, not a reason to avoid doing the job. The general guidance here — a 5W-50 synthetic powersports oil as a common choice, with 10W-40 as a general utility ATV alternative, plus separate gear oils for the front differential, rear gearcase, and transmission — will put you in the right category. From there, the manual gives you the final details for your machine.
Related Shopping Categories
Shop Oils and Fluids for a 2020 Polaris Sportsman 570 EPS ATV.
Shop Oil for a 2020 Polaris Sportsman 570 EPS ATV.
Shop Air Filters and Oil for a 2020 Polaris Sportsman 570 EPS ATV.
Shop Transmission for a 2020 Polaris Sportsman 570 EPS ATV.
Shop Oil Filters for a 2020 Polaris Sportsman 570 EPS ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.