What Oil Does a 2020 Can-Am Renegade 570 X MR Take? A Practical Guide

Shop parts for a 2020 Can-Am Renegade 570 X MR ATV.

Start With the Powertrain: A Liquid-Cooled Four-Stroke Single

The 2020 Renegade 570 X MR is built around a 570cc liquid-cooled, single-cylinder four-stroke engine. That single fact settles the most important question right away: this ATV takes ordinary four-stroke engine oil in a crankcase. There is no premix to measure at the pump and no oil-injection reservoir to keep topped off, because there is no two-stroke combustion process happening here.

Power reaches the wheels through a belt-driven continuously variable transmission, and the X MR package adds four-wheel drive with a locking front differential along with the mud-specific hardware that defines this trim. That layout matters for oil selection in two ways. The engine oil itself is a straightforward four-stroke lubricant, but the drivetrain carries several separate fluid compartments that owners frequently overlook until something starts making noise.

Engine Oil Viscosity: What This Class of ATV Typically Runs

Four-stroke utility ATVs in the 500cc to 600cc range are most commonly specified with a 5W-40 or 10W-40 powersports oil, and this machine falls squarely in that group. Can-Am's published guidance for the 570 family has historically pointed owners toward a 5W-40 synthetic-blend or full-synthetic formulation, while 10W-40 remains a widely used and entirely reasonable alternative that performs well in warm conditions. In colder climates, a 0W-40 can ease cold starts because the lower first number flows more readily at low temperatures. In consistently hot weather or under sustained heavy load, some owners step up to a 20W-50, though that is a deliberate choice rather than a default.

The two numbers in a multigrade rating describe two different behaviors. The figure before the W reflects cold-weather flow, and the figure after it describes how well the oil holds its viscosity once the engine reaches operating temperature. For a machine that gets started on a cold morning and then worked hard in summer heat, the cold number is the one that governs startup wear.

Confirm the exact viscosity and fill quantity in your owner's manual. It is a thirty-second check and the only way to be certain for your specific machine.

Does the CVT Change Which Oil You Buy?

On this ATV, the belt-driven CVT runs dry — the belt and sheaves are not bathed in engine oil — and the gearbox the CVT feeds is a separate unit with its own lubricant. That differs from a machine whose wet clutch shares the engine sump, where the oil must be friction-modified to let the clutch engage properly.

Even so, a powersports-specific oil is still the right call. Four-stroke ATV oils are formulated for the sustained rpm, the heat of a tightly cowled engine, and the shear a single-cylinder thumper places on a lubricant. Automotive oils carry friction modifiers and additive packages engineered for passenger-car engines and emissions hardware, which is not the best match here. Look for an oil rated JASO MA or MA2 — that rating signals a wet-clutch-compatible, powersports-oriented formulation and is a safe pick whether or not your particular machine routes a wet clutch through the engine sump.

Beyond the Engine: Gearbox, Differentials, and Final Drive

Engine oil is only part of the picture on a four-wheel-drive utility quad. This machine has several separate fluid compartments, each with its own specification and service interval:

  • Transmission gearbox: the unit behind the CVT that provides high, low, neutral, reverse, and park. It uses its own lubricant, not engine oil.
  • Front differential: on the X MR this is a locking front drive. Differentials with an engagement mechanism are sensitive to fluid choice, and the wrong lubricant can affect how or whether the front wheels lock in.
  • Rear final drive or gearcase: typically a hypoid gear oil in the 75W-90 or 80W-90 range.
  • Cooling system and brakes: entirely separate systems with their own fluids and their own service needs.

Treating all of these as interchangeable "gear oil" is a common and avoidable mistake. Check each one against the manual before you buy.

How Mud, Water, and Hard Work Affect Oil Life

The X MR is built for precisely the conditions that are hardest on lubricants. Water crossings and deep mud can push moisture past seals into the engine and drivetrain. A milky, coffee-colored appearance on the dipstick or in a drained gearcase is the classic sign that water has gotten in, and it means the fluid needs to be replaced rather than topped off.

The workload itself matters too. Plowing, towing, winching, slow-speed crawling through heavy mud, and long idle periods all raise oil temperature and accelerate additive depletion compared to casual trail riding. Dust and grit drawn in through intake and vent systems add further load on the oil's detergent and dispersant package. If your machine sees this kind of use regularly, plan on shorter change intervals than a normal-service schedule suggests.

Synthetic vs. Conventional: Which Formulation Makes Sense

Full-synthetic oils generally hold up better under heat, resist viscosity breakdown longer, and flow more easily on cold starts. For a machine that works hard, gets started in cold weather, or goes long between changes, synthetic is the more forgiving choice. Conventional and synthetic-blend oils cost less and serve many owners perfectly well, particularly those who change oil on a disciplined schedule and ride in moderate conditions. Either way, the rating matters more than the marketing — a JASO MA or MA2 powersports oil in the correct viscosity is the priority.

Confirming the Exact Spec for Your Machine

The guidance above covers what is typical and what works well for this class of ATV, but the authoritative numbers — exact viscosity, exact fill quantity, and the specific fluid for each drivetrain compartment — live in your owner's manual. It is worth a quick look before you buy, especially for the front differential, where the correct fluid is easy to get wrong. A dealer parts counter can confirm the same information if the manual is not close at hand.

Related Shopping Categories

Shop Oils and Fluids for a 2020 Can-Am Renegade 570 X MR ATV.

Shop Oil for a 2020 Can-Am Renegade 570 X MR ATV.

Shop Air Filters and Oil for a 2020 Can-Am Renegade 570 X MR ATV.

Shop Transmission for a 2020 Can-Am Renegade 570 X MR ATV.

Shop Oil Filters for a 2020 Can-Am Renegade 570 X MR ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.