What Type of Oil Does a 2019 Polaris Sportsman Touring 570 EPS Take?
Shop parts for a 2019 Polaris Sportsman Touring 570 EPS ATV.Start With the Engine: A Four-Stroke That Wants Powersports Oil
The 2019 Polaris Sportsman Touring 570 EPS runs a liquid-cooled, fuel-injected 567cc four-stroke single — the ProStar 570 — paired with Polaris’s PVT belt-driven automatic and an on-demand all-wheel-drive system. That combination tells you almost everything you need to know about oil selection. There is no premix to worry about, no two-stroke injection reservoir to fill, and no separate clutch oil to hunt down. What you do need is a quality four-stroke engine oil formulated for a wet-clutch, high-load powersports application, and enough of it to keep the sump at the correct level.
Viscosity: What Grade Actually Belongs in This Engine
Most four-stroke utility ATVs in the 500–600cc class are specified somewhere in the 10W-40 to 5W-50 range, and the Sportsman 570 family is no exception. Polaris markets its own branded engine oil line, and for the Sportsman 570 the commonly cited grade is a 5W-50 full synthetic — a heavier hot-viscosity number than the 10W-40 you will see on plenty of other quads. That heavier grade makes sense for an engine that spends its life pulling a plow, dragging a trailer, or crawling through mud at low speed with the cooling fan running constantly.
If you are shopping generically rather than for the branded bottle, a 10W-40 or 5W-40 powersports oil is a reasonable, widely used choice in this displacement class. Cold-climate riders sometimes step to a 0W-40 for easier cranking and faster cold-start flow, while 20W-50 shows up in hot-weather recommendations for air-cooled machines. The first number in a multigrade is the one that matters most in winter; the second number is the one that matters when the engine is hot and working hard.
Why the CVT Changes the Oil Conversation
The Sportsman Touring 570 EPS uses a PVT — Polaris Variable Transmission — which is a belt-driven continuously variable automatic. The belt itself runs dry, outside the engine oil, so you are not relying on engine oil to lubricate a belt or a torque converter. That is a meaningful difference from a quad with a geared transmission and a wet clutch, where the same oil that lubricates the top end also bathes the clutch plates.
Even so, “CVT” does not mean any automotive oil will do. This engine still has a wet centrifugal clutch element in the driveline, it still runs hot, and it still shares a crankcase with gearing that benefits from an oil with the right friction characteristics. A JASO MA or MA2 rated oil — the standard for wet-clutch powersports applications — is the safe, sensible pick. It costs no more than a comparable automotive oil and removes any doubt about friction modifiers causing clutch slip.
The Other Fluids on an AWD Sportsman
Engine oil is only one of several lubricants on this machine, and mixing them up is a common and expensive mistake. A 2019 Sportsman Touring 570 EPS with all-wheel drive has:
- Front gearcase or differential: Polaris uses a dedicated front-drive fluid for its AWD engagement system. Using a generic gear oil here can affect how — or whether — the front wheels engage.
- Transmission gearcase: The PVT sends power to a geared transmission with high, low, neutral, reverse, and park. That gearcase takes its own lubricant, separate from the engine.
- Rear gearcase or final drive: Typically a hypoid gear oil in the 80W-90 range, or the manufacturer’s own gearcase lubricant.
Each of these is serviced on its own schedule and checked at its own fill plug. None of them get topped off with engine oil.
How Work Duty Affects Your Oil
A Sportsman Touring 570 EPS is a two-up utility machine, and it tends to get used like one: plowing driveways, hauling firewood, towing a small trailer, and wading through whatever the trail throws at it. Those conditions are far harder on oil than a casual afternoon ride. Slow-speed heavy loads and long idle periods keep oil temperatures high without much airflow, and repeated water crossings or deep mud can push moisture past seals and into the crankcase. If your oil comes out looking milky or tan rather than dark and translucent, water intrusion is the likely cause, and it is worth investigating rather than simply refilling.
Dust and fine grit are the other enemy. A machine that lives on dirt roads or in sandy terrain should be on the shorter end of whatever change interval you are using, and the air filter deserves as much attention as the oil.
Synthetic or Conventional?
Full synthetic oil offers better cold-start flow, better resistance to thermal breakdown, and more consistent viscosity as it ages — all of which matter on a machine that works hard in temperature extremes. Conventional oil costs less and is perfectly serviceable for a lightly used quad that sees fair-weather trail riding. A synthetic blend sits in the middle. If you are running the 5W-50 grade this engine family is commonly associated with, you are generally looking at a synthetic product anyway, since that viscosity is rarely offered in a conventional formulation.
Confirming the Exact Spec for Your Machine
The guidance above reflects what is typical and widely published for this class of ATV and this engine family. For the precise viscosity, the exact fill quantity, and the specific drivetrain fluids your 2019 Sportsman Touring 570 EPS was built around, check the owner’s manual or ask a dealer — it is a two-minute confirmation that removes any guesswork. Buy the right oil, keep the level correct, and this engine will happily keep working for years.
Related Shopping Categories
Shop Oils and Fluids for a 2019 Polaris Sportsman Touring 570 EPS ATV.
Shop Oil for a 2019 Polaris Sportsman Touring 570 EPS ATV.
Shop Air Filters and Oil for a 2019 Polaris Sportsman Touring 570 EPS ATV.
Shop Transmission for a 2019 Polaris Sportsman Touring 570 EPS ATV.
Shop Oil Filters for a 2019 Polaris Sportsman Touring 570 EPS ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.