What Oil a 2018 Polaris Sportsman X2 570 EPS Wants — and Why It Matters
Shop parts for a 2018 Polaris Sportsman X2 570 EPS ATV.
Know What You're Feeding Before You Buy a Bottle
The 2018 Polaris Sportsman X2 570 EPS is a four-stroke utility quad through and through. Under the bodywork sits a liquid-cooled, fuel-injected single-cylinder engine, and that engine drives through a belt-type continuously variable transmission with on-demand all-wheel drive and shaft final drive. There is no oil injection reservoir to top off, no premix to measure at the pump, and no two-stroke oil to track down. What you do have is a machine built for hauling, plowing, hunting camp duty, and two-up trail riding with a convertible rear seat and dump box — which means the oil inside it works harder than the oil in a casual trail machine.
The short answer most owners are looking for: this class of utility ATV typically runs a powersports-specific four-stroke engine oil in a viscosity range around 5W-40, 10W-40, or 5W-50, with Polaris's own PS-4 engine oil line being the factory-recommended default. That is a genuinely useful starting point, not a guess. The precise number and quantity for your specific machine are printed in your owner's manual, and a thirty-second check there is the final word.
Viscosity: Where This Quad Sits in the Utility ATV World
Utility ATVs in the 500cc to 600cc displacement bracket overwhelmingly specify a multi-grade engine oil somewhere in the 5W-40 to 10W-40 neighborhood, and this Polaris is squarely in that group. The first number describes cold-weather pumpability; the second describes how the oil holds up once the engine is at operating temperature. A 5W-40 flows more readily on a cold morning, which matters if you're firing up to plow a driveway at dawn. A 10W-40 is a fine all-around choice across most of the riding season. Some air-cooled or heavily loaded machines in hot climates get listed with 20W-50, and a few applications call for 0W-40 or 5W-50 in extremes.
Polaris publishes its own oil recommendation through its PS-4 line, and following a manufacturer's branded recommendation is a sound, low-risk default because the formulation was validated against that specific engine's heat load, shear conditions, and service intervals. If you prefer to run an equivalent aftermarket powersports oil, look for one explicitly labeled for four-stroke ATV or UTV use rather than a passenger-car oil.
The Belt Transmission Changes Which Oil Qualities Matter
Because the Sportsman X2 570 uses a dry belt-type CVT, the belt itself never touches engine oil, and there is no wet clutch bathed in the engine sump in the way a manual-gearbox quad would have. That means the JASO MA or MA2 friction certification — critical on machines with a wet clutch sharing the engine oil — is less of a hard requirement here than it would be on, say, a geared utility quad with a hand-shifted gearbox.
What still matters is everything else about a powersports oil: shear stability under sustained heat, resistance to foaming, and an additive package designed for a small, high-revving, heavily loaded single. Avoid automotive oils marketed as "energy conserving," since those friction modifiers are formulated for passenger-car engines and offer nothing useful for this application. A dedicated ATV or UTV oil is the right call even though the belt runs dry.
Everything Else That Needs Lubricant on a 4x4 Sportsman
Engine oil is only one of several fluids on this machine, and owners who assume otherwise tend to discover the rest the hard way. The drivetrain on a four-wheel-drive utility quad is serviced separately:
- Front differential — on all-wheel-drive models with an engagement system, this often takes a model-specific fluid rather than a generic gear oil. Using the wrong lubricant here can affect how cleanly all-wheel drive engages and disengages.
- Rear gearcase or final drive — typically a hypoid gear oil in the 80W-90 range, or the manufacturer's designated angle-drive lubricant.
- Transmission gearcase — on many utility models the transmission housing holds its own lubricant, separate from both the engine sump and the final drive.
Each of these has its own fill point, its own capacity, and its own service interval. None of them is topped off through the engine oil filler. Keeping track of all four is simply part of owning a shaft-driven four-wheel-drive quad.
Synthetic, Conventional, and Factory-Branded Options
Full synthetic oil holds its viscosity better in extreme heat, resists breakdown during long, hot, slow-speed pulls, and flows noticeably faster on a cold start. For a machine that plows snow in January and hauls loads in July, those advantages are real. Conventional oil costs less, meets the basic requirement, and remains perfectly serviceable for owners who change it on a disciplined schedule and don't push the machine hard. Semi-synthetic sits between the two and is a reasonable compromise for moderate use.
There's no penalty for choosing synthetic on a work machine — only a higher price at the counter, offset somewhat by longer useful life between changes. The one choice worth avoiding is a cheap, non-powersports oil selected purely on price.
Hard Work Shortens the Useful Life of Any Oil
Towing, plowing, winching, slogging through mud, and long stretches of idle time in hot weather all put more stress on oil than a relaxed trail ride ever will. Water crossings and deep mud introduce a specific risk: if water finds its way past a seal or vent, the oil can turn milky or tan, which is the classic sign that moisture has emulsified into it. Check the dipstick for color and consistency after any serious wet ride, and treat discoloration as a signal to change the oil rather than ride it out.
Dusty conditions and heavy-load use also argue for shortening your change intervals well below what a light-duty owner would run. Cold-weather operation is another reason to favor a lower first number in the multi-grade — thick, sluggish oil on a freezing morning starves the top end at exactly the moment it needs flow.
Verify the Exact Spec, Then Ride
Industry-typical guidance gets you to the right shelf in the store, and for most owners a powersports 5W-40 or 10W-40 synthetic is going to be an entirely appropriate fill. For full precision on viscosity, capacity, and the specific fluids for the front differential, rear gearcase, and transmission, turn to your owner's manual or a Polaris dealer. That's a quick confirmation, not a roadblock — and it's the fastest way to be certain the 2018 Sportsman X2 570 EPS in your garage is running exactly what it was built for.
Related Shopping Categories
Shop Oils and Fluids for a 2018 Polaris Sportsman X2 570 EPS ATV.
Shop Oil for a 2018 Polaris Sportsman X2 570 EPS ATV.
Shop Air Filters and Oil for a 2018 Polaris Sportsman X2 570 EPS ATV.
Shop Transmission for a 2018 Polaris Sportsman X2 570 EPS ATV.
Shop Oil Filters for a 2018 Polaris Sportsman X2 570 EPS ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.