Picking the Right Oil for a 2018 Polaris Sportsman Touring 570 SP

Shop parts for a 2018 Polaris Sportsman Touring 570 SP ATV.

What This Machine Actually Is

The 2018 Polaris Sportsman Touring 570 SP is a two-up utility quad built around a liquid-cooled, fuel-injected 567cc four-stroke single. That one fact settles the most common question immediately: this ATV burns gasoline and takes ordinary four-stroke engine oil. There is no premix to measure, no oil-injection reservoir to top off, and no two-stroke oil involved anywhere in the powertrain. Everything below applies to the four-stroke engine in the crankcase, plus the separate drivetrain lubricants that live elsewhere on the machine.

The layout matters too, because it shapes the answer. This quad uses a belt-driven continuously variable transmission and shaft drive to all four wheels, with all-wheel drive engaged on demand. That combination means engine oil is only one of several fluids you will eventually buy for it.

The Viscosity You Should Be Looking For

Polaris publishes a specific recommendation for this engine family, and it is worth knowing before you walk into a store. The factory fill and the recommended service oil for the Sportsman 570 is Polaris's own PS-4 formulation, most commonly listed in a 5W-50 full synthetic weight. That is a heavier hot-viscosity number than many riders expect, and it reflects the reality that this engine works hard, runs hot in summer, and is frequently asked to plow, tow, or crawl through mud at low speed with very little airflow across the radiator.

If the branded oil is not available, the practical fallback is a powersports-specific four-stroke oil in the 10W-40 or 5W-40 range, which is the industry-typical spec across utility ATVs in this displacement class. A 0W-40 or 5W-40 makes sense for cold-weather starts, and a 20W-50 is sometimes chosen for hot climates or sustained heavy work. The exact figure for your machine is printed in the owner's manual, and confirming it takes about thirty seconds.

Why the CVT Matters to Your Oil Choice

This quad uses a belt-driven continuously variable transmission rather than a geared manual or semi-automatic box. That distinction matters because the belt runs dry, in its own housing, and never touches the engine oil. You are not choosing an oil to satisfy a wet clutch the way you would on a geared machine.

What that means in practice: you do not strictly need a JASO MA or MA2 wet-clutch-rated oil for clutch performance, though plenty of riders still run one because those formulations are built for the heat and shear of a powersports engine. What you do want is an oil designed for a high-revving, hot-running single rather than a passenger-car oil optimized for fuel economy and long drain intervals. Automotive oils with heavy friction-modifier packages are a poor match for this kind of engine.

The Other Fluids on an AWD Sportsman

Engine oil is only one of several lubricants on this machine, and mixing them up is a common and expensive mistake. Because this is an all-wheel-drive utility quad, it carries separate fluid compartments that are serviced independently of the crankcase.

  • Front gearcase: Houses the AWD engagement mechanism. It typically uses a model-specific demand-drive fluid rather than a generic gear oil, and the wrong lubricant can affect how cleanly the front wheels engage.
  • Rear gearcase and final drive: Usually filled with a hypoid gear oil in the 80W-90 range.
  • Transmission gearcase: Separate from the engine on this platform and filled with its own specified lubricant.

None of these share oil with the engine, and none are topped off through the same fill hole. Each gets checked and changed on its own schedule.

How You Ride Changes What You Should Run

Plowing driveways, dragging a trailer, winching, and long stretches of idling in summer heat are all harder on oil than a casual trail ride. So is water. If you cross streams or sit in deep mud, watch for a milky, frothy appearance on the dipstick — that is emulsified water, and it means the oil needs to come out regardless of how many miles are on it.

Cold weather is the other major variable, and it is the main reason to favor the lower first number in a multigrade. A 5W-50 or 0W-40 will circulate far more readily on a January morning than a heavier straight-weight oil, which matters most in the first few seconds after startup.

Synthetic or Conventional?

Full synthetic oils flow better on a cold morning and hold up longer under sustained heat, which suits a machine that spends its life working. Conventional oil costs less and remains perfectly serviceable for a lightly used quad that sees fair-weather trail duty. Semi-synthetic sits in between and is a reasonable compromise for most owners. Whichever you choose, shorten the interval if the machine lives in dust, mud, or constant heavy load.

Confirming the Exact Spec

Everything above reflects the common, published guidance for this model and its engine family. For the precise viscosity, the exact fill quantity, and the correct fluid for each gearcase, check your owner's manual or ask a dealer. It is a quick confirmation step, not a research project — and it is the last thing to do before you buy.

Related Shopping Categories

Shop Oils and Fluids for a 2018 Polaris Sportsman Touring 570 SP ATV.

Shop Oil for a 2018 Polaris Sportsman Touring 570 SP ATV.

Shop Air Filters and Oil for a 2018 Polaris Sportsman Touring 570 SP ATV.

Shop Transmission for a 2018 Polaris Sportsman Touring 570 SP ATV.

Shop Oil Filters for a 2018 Polaris Sportsman Touring 570 SP ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.