Choosing the Right Oil for a 2018 Polaris Sportsman 570 EPS

Shop parts for a 2018 Polaris Sportsman 570 EPS ATV.

The 2018 Sportsman 570 EPS Powertrain at a Glance

The 2018 Polaris Sportsman 570 EPS is a four-wheel-drive utility ATV with a liquid-cooled, fuel-injected, single-cylinder four-stroke engine. It uses a continuously variable transmission, or CVT, with a belt that runs dry outside the engine oil sump. Electronic power steering is part of the package, and the machine has separate front and rear drivetrain lubricants in addition to engine oil. That layout matters because engine oil does not lubricate every component on this quad. The CVT belt, the transmission gearcase, and the differentials all have their own service needs.

Engine Oil Viscosity: The Common Range for This Class

Across four-stroke utility ATVs in the 500cc to 600cc class, the most common engine oil viscosities are 10W-40 and 5W-40, with 5W-50 appearing on many liquid-cooled machines that work hard in varied temperatures. The 2018 Sportsman 570 EPS is widely associated with a 5W-50 full synthetic, and Polaris-branded PS-4 in that viscosity is the usual factory-favored choice. That does not mean a 10W-40 powersports oil will destroy the engine, but 5W-50 is the safer default for this specific model. The 5W number helps oil flow on cold starts, while the 50 weight maintains film strength when the engine is hot and loaded. Owners in extreme cold may see 0W-40 mentioned in general powersports literature, and hot-climate or air-cooled machines sometimes use 20W-50. For this liquid-cooled Sportsman, start with the 5W-50 recommendation and confirm the exact spec in the owner's manual.

Why the CVT Matters for Oil Selection

Because this ATV uses a CVT, the belt and its clutches do not share engine oil the way a wet-clutch manual transmission does. That means the engine oil can be chosen mainly for engine protection, but it still needs to be a powersports-specific formula rather than ordinary automotive oil. Many utility ATV engines run at sustained higher rpm, operate in dust and water, and may have internal components that do not tolerate the friction modifiers found in some car oils. A JASO MA or MA2 rating is a useful indicator that the oil is intended for this type of application. The CVT housing itself should stay dry and clean, and it is not filled with engine oil. So the oil question for this quad is really about the engine, while the transmission gearcase and differentials are handled separately.

Gearcase, Differential, and Final Drive Lubricants

A 4x4 utility ATV like the Sportsman 570 EPS has several lubricant reservoirs beyond the engine. There is typically a transmission or gearcase that uses its own fluid, often an automatic gear lubricant or a gear oil in the 75W-90 to 80W-90 range. The front differential on many Polaris utility models uses a specialized front-drive fluid because it contains the all-wheel-drive engagement mechanism. Putting the wrong fluid there can change how the front drive engages, so that reservoir deserves specific attention. The rear gearcase or final drive usually takes a hypoid gear oil such as 80W-90 or a model-specific gearcase fluid. None of these drivetrain fluids are interchangeable with the 5W-50 engine oil. They are serviced separately, and each should be checked against the owner's manual for the correct type and level.

How Hard Work, Weather, and Contamination Affect Oil

Utility ATVs often live harder lives than trail-only machines. Plowing, towing, hauling, mud, water crossings, and long idle periods all place extra stress on engine oil. Heat and load accelerate oil breakdown, and water or mud intrusion can contaminate both engine oil and drivetrain lubricants. A milky or frothy appearance is a common sign that moisture has entered the system. Cold weather is another reason viscosity matters: the 5W in a 5W-50 oil flows more easily on a freezing morning than a heavier cold-weight oil would. In hot summer work, the 50 weight helps maintain oil pressure and protect hot engine parts. Owners who work their Sportsman 570 EPS in severe conditions should treat oil changes as a maintenance item that may need to happen more often than the normal interval suggests. Dusty environments make clean oil even more important.

Synthetic vs. Conventional, and Verifying the Exact Spec

Full synthetic oil is the common recommendation for the Sportsman 570 EPS and similar liquid-cooled utility engines. Synthetics generally flow better in cold weather, resist high-temperature breakdown, and hold their viscosity longer than conventional oil. Conventional oil is less expensive and can be acceptable for light use with frequent changes, but the 5W-50 viscosity this engine favors is most often found in synthetic or synthetic-blend formulas. A semi-synthetic can be a reasonable middle ground. What matters most is matching the recommended viscosity and using an oil rated for powersports use. To confirm the exact engine oil viscosity, capacity, and drivetrain fluid types for a 2018 Sportsman 570 EPS, check the owner's manual or ask a Polaris dealer. That is the final precision step. Once confirmed, the choice is simple: quality 5W-50 synthetic for the engine, separate gearcase and differential fluids for the drivetrain, and change intervals adjusted to how hard the ATV works.

Related Shopping Categories

Shop Oils and Fluids for a 2018 Polaris Sportsman 570 EPS ATV.

Shop Oil for a 2018 Polaris Sportsman 570 EPS ATV.

Shop Air Filters and Oil for a 2018 Polaris Sportsman 570 EPS ATV.

Shop Transmission for a 2018 Polaris Sportsman 570 EPS ATV.

Shop Oil Filters for a 2018 Polaris Sportsman 570 EPS ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.