What Kind of Oil Does a 2017 Polaris Sportsman Touring 570 SP Take?

Shop parts for a 2017 Polaris Sportsman Touring 570 SP ATV.

Start With the Engine: A Four-Stroke That Wants Powersports Oil

The 2017 Sportsman Touring 570 SP is powered by a liquid-cooled, fuel-injected four-stroke single, so the conversation here is entirely about four-stroke engine oil — there is no premix to mix and no injection reservoir to top off. That single fact narrows the field considerably and rules out a whole category of products that simply do not belong in this machine.

For a utility quad in this displacement class, the viscosity most commonly specified falls in the 5W-50 or 10W-40 range. Polaris-branded PS-4 in 5W-50 is the formulation most frequently cited for the ProStar 570 engine family, and it is a sound default for owners who want to stay close to the factory recommendation. A 10W-40 powersports oil is also a reasonable choice in milder conditions, and 0W-40 or 5W-40 shows up in cold-climate recommendations where easier cranking and quicker cold-start flow matter. In hot weather or under sustained heavy load, some owners step to a heavier second number such as 20W-50, though that is a judgment call rather than a universal rule.

What matters more than the exact number is the oil's intended application. This is a wet-clutch-adjacent, high-rpm, air-and-liquid-cooled environment, not a passenger car. An oil carrying a JASO MA or MA2 rating is the right family of product, and automotive oils with friction modifiers are best avoided.

How the Belt Drive Shapes the Oil Decision

The Touring 570 SP uses a continuously variable, belt-driven automatic — Polaris calls it PVT — and that architecture changes what the engine oil is actually being asked to do. The belt itself runs dry, outside the crankcase, so the engine oil is not responsible for belt grip or belt life. The clutch pack that handles engagement at low speed is lubricated by the transmission's own fluid rather than by engine oil, which means the engine oil does not have to satisfy wet-clutch friction requirements the way it would on a machine with a shared sump.

That is good news for oil selection, but it is not a license to run whatever is on the shelf. A powersports-specific four-stroke oil still delivers the shear stability, high-temperature film strength, and anti-wear package this engine expects. If you prefer to follow the manufacturer's own formulation, that is a perfectly defensible approach and keeps you inside the specification envelope the engine was validated against.

Drivetrain Fluids Are a Separate Job Entirely

Engine oil is only one of several lubricants on this machine, and treating them as interchangeable is a common and expensive mistake. A four-wheel-drive utility ATV of this era typically carries a front gearcase, a rear gearcase or final drive, and a transmission gearcase, each with its own fill and drain and its own service interval.

  • Front gearcase: On models with an engagement system that locks the front wheels in on demand, the fluid is a specific formulation rather than a generic gear oil. Using the wrong lubricant here can interfere with how — or whether — four-wheel drive engages.
  • Rear gearcase: Commonly a hypoid gear oil in the 80W-90 range, or a manufacturer-specified gearcase fluid.
  • Transmission gearcase: Serviced on its own schedule with its own specified lubricant, separate from the engine sump.

None of these are topped off with engine oil, and none of them are checked with the same dipstick. Confirm the correct fluid for each before you add anything.

Conventional or Synthetic?

Both can work, and the choice comes down to how you use the machine. Synthetic oil generally flows better at low temperatures, resists thermal breakdown under sustained heat, and holds its viscosity longer between changes — all of which matter on a machine that plows snow in January and hauls a loaded trailer in July. Conventional oil costs less and remains entirely suitable for a lightly used quad that sees fair-weather trail miles and regular changes. A semi-synthetic sits between the two and is a common compromise for owners who want most of the benefit without the full price.

Hard Work Is Hard on Oil

Plowing, towing, winching, slow-speed crawling through mud, and long idle periods all put more stress on engine oil than a casual afternoon on groomed trails. Heat soak, fuel dilution, and airborne grit accumulate faster, and the oil's additive package depletes sooner. Water crossings deserve particular attention: if moisture gets into the crankcase or a gearcase, the oil can turn milky or cloudy, and that is a sign to change it rather than wait for the next scheduled interval.

Cold weather is the other practical consideration. The first number in a multigrade rating is what governs how readily the oil circulates on a frigid start, which is exactly why a 0W or 5W rating earns its keep in northern climates. If your quad lives in a heated garage and only runs in summer, that advantage matters far less.

Confirming the Exact Spec for Your Machine

Everything above reflects what is typical and widely recommended for a four-stroke utility ATV in this class, and it will get you to the right shelf. For the precise viscosity, the exact fill quantity, and the specific drivetrain fluids your 2017 Sportsman Touring 570 SP was built around, a quick look at the owner's manual or a call to your dealer settles it in a minute or two. That confirmation step is worth doing once, and then you can buy with confidence for the life of the machine.

Related Shopping Categories

Shop Oils and Fluids for a 2017 Polaris Sportsman Touring 570 SP ATV.

Shop Oil for a 2017 Polaris Sportsman Touring 570 SP ATV.

Shop Air Filters and Oil for a 2017 Polaris Sportsman Touring 570 SP ATV.

Shop Transmission for a 2017 Polaris Sportsman Touring 570 SP ATV.

Shop Oil Filters for a 2017 Polaris Sportsman Touring 570 SP ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.