Oil Types and Weights for a 2015 Yamaha PW50

Shop parts for a 2015 Yamaha PW50 Dirt Bike.

The PW50 Is a Two-Stroke, and That Changes the Oil Conversation

The 2015 Yamaha PW50 is a 49cc air-cooled two-stroke single, and that one fact shapes everything about how it gets lubricated. There is no crankcase full of engine oil the way a four-stroke has. Instead, lubrication happens in two distinct places: the top end and bottom end receive their oil from the fuel charge, while the transmission and final drive draw from a separate sump. Understanding that split is the key to answering the oil question correctly, because a PW50 owner is really asking about two different fluids at once.

Yamaha built the PW50 with an oil injection system rather than requiring the rider to premix fuel at the pump. That design choice is one of the reasons the bike has been a favorite first dirt bike for decades – a parent can fill the gas tank and the oil tank separately and let the pump handle the rest.

What Goes in the Oil Injection Tank

The PW50 carries a small dedicated oil reservoir, and the fluid that belongs in it is a two-stroke oil formulated for oil-injection systems. Most modern two-stroke oils sold for this purpose are synthetic or semi-synthetic blends engineered to burn cleanly, resist carbon buildup on the piston crown and exhaust port, and stay fluid enough to flow through a small pump and metering line in cold weather.

Yamaha's own two-stroke oil is the natural default choice and is widely available. Any reputable two-stroke oil labeled for injection use will work, but avoid products marketed strictly as premix-only racing oils, since some of those are too viscous to meter reliably through an injection pump. Look for a bottle that explicitly states it is suitable for oil injection.

Because the pump meters oil automatically, there is no ratio to calculate in normal operation. The system is designed to deliver the correct proportion across the rev range, which is one of its advantages over premixing.

Premix Ratios If You Delete or Bypass the Injection System

Some PW50 owners, particularly those running modified bikes or who simply prefer the simplicity of premix, block off the injection pump and mix oil into the fuel themselves. If that describes your setup, the common ratios used on small two-strokes generally fall between 32:1 and 50:1, with 40:1 being a frequently cited middle ground for a stock-displacement engine running a quality synthetic oil.

Getting this wrong has consequences in both directions. Too little oil means inadequate lubrication for the piston, ring, and connecting rod bearing, which accelerates wear and can lead to a seizure. Too much oil fouls the spark plug and loads the exhaust with carbon. If you are premixing, measure with a ratio cup rather than eyeballing it.

For a stock 2015 PW50 still running its injection system, none of this applies – the oil tank is the only fuel-related lubrication concern.

Transmission and Final Drive Oil

The PW50 uses an automatic centrifugal clutch and a shaft final drive, and the transmission case holds its own supply of lubricant that is completely separate from the two-stroke oil. This is the fluid many owners overlook, and it deserves the same attention as the injection oil.

Small two-stroke gearboxes of this type typically call for a motorcycle-specific gear oil in a viscosity range around 10W-30 or 10W-40. Because the clutch on the PW50 is a wet centrifugal unit bathed in this same oil, the fluid needs to be compatible with wet clutch materials. That means choosing a motorcycle-specific product rather than a generic automotive engine oil, which may contain friction modifiers that alter clutch engagement.

The shaft drive gear case at the rear wheel is a separate small reservoir with its own lubricant, typically a heavier gear oil. Both the transmission and the final drive should be checked for level and condition as part of routine maintenance.

Why Oil Choice Matters More Than It Seems on a Small Two-Stroke

A 49cc two-stroke works hard relative to its size, and the PW50 is often ridden by beginners who spend a lot of time at low throttle openings. That pattern of use is actually harder on oil than sustained high-rpm running, because low combustion temperatures promote carbon deposits and plug fouling.

Using a low-quality or incorrect two-stroke oil accelerates those deposits, shortens spark plug life, and can eventually restrict the exhaust port. On the transmission side, running the wrong fluid or letting the level drop causes clutch slip, noisy engagement, and premature bearing wear. Neither failure mode is dramatic at first, which is exactly why consistent, correct oil selection pays off over the life of the bike.

Confirming the Exact Specification for Your PW50

The guidance above reflects what is typical for this class of machine, and it will get a PW50 owner pointed in the right direction with confidence. For the precise figures – the exact oil Yamaha recommends for the injection tank, the specified transmission oil viscosity, and the correct fill quantities for both the gearbox and the final drive – the owner's manual for the 2015 model is the authoritative source. A quick check there, or a call to a Yamaha dealer, takes only a few minutes and removes any doubt.

Once you know what your bike wants, stocking the right fluids is straightforward, and keeping both reservoirs topped with the correct products is one of the simplest things you can do to keep a PW50 running cleanly for years.

Related Shopping Categories

Shop Oils and Fluids for a 2015 Yamaha PW50 Dirt Bike.

Shop Oil for a 2015 Yamaha PW50 Dirt Bike.

Shop Air Filters and Oil for a 2015 Yamaha PW50 Dirt Bike.

Shop Transmission for a 2015 Yamaha PW50 Dirt Bike.

Shop Oil Filters for a 2015 Yamaha PW50 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your dirt bike's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.