Oil Guide for the 2013 Suzuki RM85: Premix and Gearbox Lubrication

Shop parts for a 2013 Suzuki RM85 Dirt Bike.

The 2013 Suzuki RM85 is a liquid-cooled, 84cc two-stroke motocross machine built for young racers and smaller riders who want real track performance. Because it is a two-stroke, the question of "what oil does it take" actually has two answers, not one. The RM85 burns oil mixed with its fuel to lubricate the crankcase, cylinder, and piston, and it also carries a separate supply of oil in the transmission case to lubricate the gearbox and clutch. Those are two different fluids doing two different jobs, and getting both right is what keeps this little engine crisp, clean, and long-lived.

Two Separate Lubrication Systems on the RM85

On a two-stroke engine, there is no oil sump feeding the crankshaft the way there is on a four-stroke. Instead, oil is introduced into the combustion path, either pre-mixed with gasoline in the fuel tank or delivered by a pump. The Suzuki RM85 uses premix — the rider mixes two-stroke oil into the gas can before filling the tank. That oil travels through the carburetor, into the crankcase, and up past the piston, leaving a protective film on every surface it touches before burning off in the combustion chamber.

The transmission, by contrast, is a sealed, separate compartment. It has its own fill and drain, its own oil level check, and its own fluid requirement. Nothing from the fuel tank ever reaches it. This separation is one of the most commonly misunderstood points on a two-stroke, and it is why a rider can have a perfectly jetted engine and still destroy a gearbox by neglecting the transmission side of the equation.

Choosing a Two-Stroke Premix Oil

Modern two-stroke oils are almost universally synthetic or semi-synthetic blends, and that is a good thing for a high-revving 85cc race engine. Synthetics resist the extreme heat of a small-bore two-stroke better than older mineral oils, burn more cleanly, and leave less carbon behind on the power valve, the piston crown, and the exhaust port. Carbon buildup is the enemy of performance on a bike like the RM85, because a gummed-up exhaust port or power valve robs the engine of the top-end pull that makes this bike fun.

Look for an oil explicitly labeled for two-stroke premix use, and ideally one rated for air-cooled or liquid-cooled high-performance engines. Avoid anything marketed as an outboard or chainsaw oil if you are riding at motocross pace — those formulations are designed for lower combustion temperatures and steady loads, not the on-and-off throttle abuse of a race track. A dedicated motorcycle two-stroke premix oil is the right category for this bike.

Premix Ratios: What's Typical and Why It Matters

Premix ratios for two-stroke dirt bikes generally fall somewhere between 32:1 and 50:1, with 40:1 being a very common middle ground for modern synthetic oils. The exact figure depends on the oil manufacturer's recommendation and the engine's state of tune. A richer mix (more oil, such as 32:1) provides more lubrication but can foul plugs and run slightly leaner on fuel; a leaner mix (such as 50:1) burns cleaner but offers less margin if jetting is off or the engine is worked hard.

What matters most is consistency. Pick a ratio, mix it accurately with a ratio cup rather than eyeballing it, and stick with it. Changing ratios from tank to tank forces you to re-jet and makes it impossible to diagnose a running problem. If you are unsure which ratio suits your RM85, the owner's manual is the fastest place to find the number Suzuki specifies, and a dealer can confirm it in a minute if the manual has gone missing.

Gearbox Oil for the RM85's Transmission

The transmission side of the RM85 takes a motorcycle-specific gear oil, and the common viscosity range for bikes in this class is 10W-30 or 10W-40. Because the clutch on this bike is a wet clutch that shares the transmission oil, the fluid has to do double duty: lubricate the gears and allow the clutch plates to grip and release predictably. That is why automotive engine oil is a poor choice here. Many car oils contain friction modifiers designed to reduce drag, and those additives can cause a wet clutch to slip under load.

Look for a product labeled for motorcycle use, ideally carrying a JASO MA or MA2 rating, which indicates it has been tested for wet-clutch compatibility. Both conventional and synthetic gear oils work in this application. Synthetics hold up better under the heat of repeated clutch slipping and hard shifting, while conventional oil costs less and is perfectly serviceable for a rider who changes it on a reasonable schedule. Either way, the transmission oil is a separate service from the premix and should be changed on its own interval.

What Happens When You Use the Wrong Oil

Running too little oil in the premix, or using an oil that does not tolerate high combustion temperatures, accelerates piston and ring wear and can lead to a seized top end. Running too much oil fouls spark plugs, gums up the power valve, and coats the exhaust with unburned residue that eventually chokes performance. On the transmission side, using an automotive oil with friction modifiers typically shows up first as a clutch that slips when you get on the gas out of a corner, and later as worn clutch plates.

None of these failures happen instantly, which is what makes them easy to overlook. A bike that runs fine on the wrong oil for a few rides can still be accumulating carbon or wearing clutch material. Using the correct fluids from the start is far cheaper than a top-end rebuild or a clutch replacement.

Confirming the Exact Specification for Your Bike

The guidance above reflects what is typical and widely accepted for a two-stroke motocross bike of this size and era, and it will serve you well in practice. For the precise premix ratio and the exact gearbox oil viscosity and capacity Suzuki lists for the 2013 RM85, a quick look at the owner's manual settles it definitively. If the manual is not handy, any Suzuki dealer can provide the same information. Treat that as a thirty-second confirmation step, not a reason to delay getting the bike ready to ride.

Related Shopping Categories

Shop Oils and Fluids for a 2013 Suzuki RM85 Dirt Bike.

Shop Oil for a 2013 Suzuki RM85 Dirt Bike.

Shop Air Filters and Oil for a 2013 Suzuki RM85 Dirt Bike.

Shop Transmission for a 2013 Suzuki RM85 Dirt Bike.

Shop Oil Filters for a 2013 Suzuki RM85 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your dirt bike's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.