What Size Chain Does My 2000 Husaberg FXE600 Dirt Bike Use?
Shop dirt bike parts for a 2000 Husaberg FXE600 Dirt Bike.
What Chain Size Does the 2000 Husaberg FXE600 Use?
Using the correct chain size is essential for the performance, safety, and longevity of your 2000 Husaberg FXE600. For this model, the most commonly specified OEM chain size is 520. This size is standard for many high-performance enduro and dirt bikes, including the FXE600, due to its balance of strength and weight. While most 2000 Husaberg FXE600s use a 520 chain, always verify your specific bike, as modifications or regional differences can occasionally affect specs. If you're unsure, check your owner's manual or inspect your current chain for stamped size markings.Understanding Dirt Bike Chain Sizes
Dirt bike chain sizes are identified by a three-digit number, such as 520. The first digit (5) refers to the pitch, which is the distance between the centers of two adjacent pins, measured in eighths of an inch (5/8" pitch). The next two digits (20) indicate the inner width of the chain in eighths of an inch (2.0/8" or 1/4" width). Many dirt bikes, including the 2000 Husaberg FXE600, use a 520 chain because it offers a strong, lightweight solution for bikes with significant power and torque. This size is ideal for the FXE600's engine and riding demands.How Many Links Does the Chain Have?
The typical OEM chain length for the 2000 Husaberg FXE600 is usually around 118 links. However, this can vary depending on your bike's setup. Factors that can change the required link count include:- Switching to larger or smaller sprockets
- Adjusting the axle position for chain tension
- Modifying the wheelbase for handling preferences
Factors That Can Affect Chain Size or Length
Several factors can influence the ideal chain size or length for your 2000 Husaberg FXE600:- Riding type: Aggressive motocross or enduro riding may require a stronger chain or different gearing.
- Engine displacement and torque: The FXE600's powerful engine demands a robust chain like the 520.
- Aftermarket sprockets: Changing sprocket sizes alters the required chain length.
- Suspension setup: Adjustments to suspension or wheelbase can affect chain tension and length.
How to Confirm the Correct Chain for Your Bike
To ensure you're using the right chain for your 2000 Husaberg FXE600, follow these steps:- Inspect your current chain for stamped size markings (e.g., "520" on the side plates).
- Count the number of links, including the master link.
- Consult your owner's manual for OEM specifications.
- If in doubt, measure the pitch (distance between pins) and width (inner width between plates) with a caliper.
When Should You Replace Your Chain?
Replace your chain if you notice:- Excessive stretching or kinking
- Visible wear on the rollers or side plates
- Difficulty maintaining proper tension
- Unusual noises or skipping under load
Related Shopping Categories
Shop Chains for a 2000 Husaberg FXE600 Dirt Bike.
Shop Sprockets for a 2000 Husaberg FXE600 Dirt Bike.
Shop Chain and Sprocket Kits for a 2000 Husaberg FXE600 Dirt Bike.
Shop Chain Cleaners for a 2000 Husaberg FXE600 Dirt Bike.
Shop Chain Lubricant for a 2000 Husaberg FXE600 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
