PreRide Checklist for a 2013 MV Agusta Brutale 1090 Motorcycle
Shop parts for a 2013 MV Agusta Brutale 1090 Motorcycle.
Introduction
Before you fire the triple on a 2013 MV Agusta Brutale 1090 Motorcycle, a concise inspection protects both rider and machine. This naked sportbike is razor-sharp and unforgiving if a small issue goes unnoticed. The following pre-ride checklist focuses on the systems that most commonly affect safety and performance for this exact model.
Quick 60-Second Pre-Ride Checklist for the motorcycle listed in PreRide Checklist for a 2013 MV Agusta Brutale 1090 Motorcycle
- Master switch on & kill switch set to run.
- Engine starts smoothly; no odd noises at idle.
- Front and rear brake lever/pedal feel solid.
- Tires warm enough, correct pressure, no visible cuts.
- Chain tension in range & lightly lubed.
- Headlight, tail light, brake light and turn signals working.
- Mirrors aligned, mirrors & throttle free of obstruction.
- Kickstand retracts cleanly; riding gear secured.
Tires and Wheels
The 2013 MV Agusta Brutale 1090 Motorcycle rides on 120/70ZR17 front and 180/55ZR17 rear street sport tiresinspect both for correct pressures and tread depth. Check pressures cold if possible; this bike is sensitive to front-end feedback so +-2 psi can change handling noticeably.
Look for bulges, embedded objects, or uneven wear that could indicate alignment or suspension issues. Spin each wheel to confirm there are no hops or wobbles; even a slight out-of-round condition is amplified by the Brutale’s stiff chassis.
Brakes
On the Brutale 1090, powerful radial calipers demand crisp maintenance. Squeeze the front lever and press the rear pedal to ensure consistent, firm resistance without sponginess. If either lever draws back to the grip or pedal travel feels excessive, do not ride until corrected.
Visually inspect pad thickness through the caliper openings; replace pads that are near wear indicators or less than a few millimeters thick. Check the transparent brake fluid reservoirs: level should be between minimum and maximum and the fluid color should be clear to light amber. Dark or cloudy fluid reduces boiling point and braking performance.
Chain / Drivetrain
The Brutale 1090 uses a chain driveconfirm proper tension by measuring vertical slack at the midpoint of the lower chain run. Ideal play is small but perceptible; too tight stresses bearings, too loose risks chain jump. Adjust the rear axle evenly and re-torque fasteners to secure alignment.
Apply a light film of chain lube to the rollers and links, especially after wet rides. Rotate the rear wheel and observe the chain run for kinks, stiff links, or tight spots that can cause abrupt throttle feedback on this responsive triple.
Fluids
Check engine oil level on the sight glass while the bike is upright and warm; level should sit within the marked band. On the Brutale’s high-revving engine, low oil can accelerate wear and affect performance.
Confirm coolant level in the expansion tank is between marks and visually inspect hoses for soft spots or seepage. For brakes, ensure reservoirs are at the correct levels as noted earlier. Top-offs should use the specified fluid type, but keep the action practical: if you see a rapid drop in any fluid, address it before riding.
Controls and Lights
Twist the throttle to confirm it snaps back cleanly to idle without sticking. Pull the clutch lever through its full travel to verify free play and that the clutch disengages smoothly. Operate the front brake lever, rear pedal, starter button, and kill switch once each.
Switch on the headlight and run the high beam test. Activate left and right turn signals and watch the tail/brake light illuminate when the lever is applied. The Brutale’s compact tail section makes a single blown rear bulb easy to miss visuallyinspect bulbs and indicators routinely.
Suspension and General Condition
Scan the front forks and rear shock for oil staining or drips around the seals. Any wetness or slick residue suggests seal wear and diminished damping. Compress the suspension a few times to listen for knocks and to confirm smooth rebound.
Survey the frame, fasteners, and mounting points for looseness or cracks. Check the exhaust and headers for secure hangers and any signs of impact. On this agile streetbike, even small loose components can produce unsettling vibration or rattle at speed.
Final Safety Check Before Riding
- Stow tools & loose items; ensure tank bag or tail pack is fastened.
- Verify the kickstand lifts fully and that its switch (if equipped) is functioning by pulling in the clutch and trying to select gear briefly.
- Adjust mirrors to provide a clear rear view without moving your head too much.
- Confirm that the fuel level is adequate for the planned rideBrutale range can be limited when ridden hard.
- Don your helmet and protective gear, clip into jacket zips, fasten gloves; take one last visual sweep around the bike.
Conclusion
Consistent, targeted checks before every outing preserve the performance and safety of your 2013 MV Agusta Brutale 1090 Motorcycle. Make this routine brief but thoroughhabit prevents most roadside issues. When you find a problem, pause and correct it rather than improvising; the Brutale rewards attention to detail with predictable, exhilarating handling.
Related Shopping Categories
Shop Tires for a 2013 MV Agusta Brutale 1090 Motorcycle.
Shop Brakes for a 2013 MV Agusta Brutale 1090 Motorcycle.
Shop Chain and Sprockets for a 2013 MV Agusta Brutale 1090 Motorcycle.
Shop Oil and Fluids for a 2013 MV Agusta Brutale 1090 Motorcycle.
Shop Suspension Parts for a 2013 MV Agusta Brutale 1090 Motorcycle.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
