How to Change the Oil in a 2025 Husqvarna TC150

Shop parts for a 2025 Husqvarna TC150 Dirt Bike.

Keeping your 2025 Husqvarna TC150 running at peak performance means staying on top of routine maintenance – and that includes regular oil changes. This step-by-step guide, proprietary to MotoSport.com, walks you through the entire process with essential tools, critical tips specific to your TC150, and important model call-outs to make the job fast and foolproof.

Tools and Materials Needed

  • Socket set (for drain and level bolts)
  • Torque wrench
  • Oil drain pan
  • Funnel (paper or plastic)
  • Clean rags and gloves
  • Contact cleaner (optional, for cleanup)
  • Measuring cup (to ensure accurate oil quantity)
  • Replacement oil – 10W-40 motorcycle oil, recommended for the Husqvarna TC150
  • New crush washer (often included in oil change kits) (Tusk 2-Stroke Transmission Oil Change Kit, Bel-Ray EXL 10W-40)

Steps to Change the Oil on a 2025 Husqvarna TC150

  1. Warm up your engine:
    • Run the bike briefly to bring the engine to operating temperature. This ensures the oil flows freely, helping contaminants drain thoroughly.
  2. Stabilize the bike:
    • Place the TC150 on a level stand. Having the bike upright and steady is critical for draining and leveling oil.
  3. Locate and remove the drain bolt(s):
    • Husqvarna two-stroke transmissions generally feature one or two oil drain bolts. On the TC150, there may be a primary drain bolt—and sometimes a secondary, depending on production variation. Double check your owner's manual and examine the bottom and sides of the transmission case.
    • Put your drain pan under the bolt. Using the correct size socket, remove the bolt(s) and let all the oil drain out completely.
    • Inspect the magnetic tip if equipped; wipe off any metallic debris.
    • Replace the old crush washer with a new one for a leak-free seal (kits usually include this).
  4. Reinstall the drain bolt(s):
    • Thread the drain bolt(s) back in by hand to avoid cross-threading, then tighten to the factory torque specification (from your service manual).
  5. Add new oil:
    • Remove the filler cap (located on the side or top of the transmission case).
    • Use a funnel to carefully pour in the recommended quantity of 10W-40 oil.
    • Reference your TC150 manual for the precise capacity; for most Husqvarna 150 two-strokes, it’s typically ~750ml to 850ml, but always verify.
  6. Verify oil level:
    • Locate the oil level check bolt (sometimes called the "weep" or "sight" bolt), usually found just above the starter area. With the bike upright, gradually fill with oil until a small amount begins to seep out of the check hole.
    • Once the oil seeps out, reinstall the check bolt snugly.
  7. Clean up:
    • Wipe away any spilled oil from the case and around the bolts. Contact cleaner works well for this.
    • Safely dispose of your used oil per local regulations.
  8. Confirm function and re-check level:
    • Start the engine and let it idle for a minute. Inspect for leaks at both the drain and check bolts.
    • Shut off, let oil settle, and re-check the oil check bolt if desired to ensure proper fill.

Specific Call-Outs for the 2025 Husqvarna TC150

  • Oil Type: Always use a high-quality 10W-40 motorcycle oil suitable for two-stroke gearboxes. The Bel-Ray EXL 10W-40 is a top pick for the TC150 (see Tusk 2-Stroke Transmission Oil Change Kit).
  • Drain Bolts: The TC150 may have one or two drain bolts. Remove both if equipped for a complete drain, as residual oil can remain otherwise. Always check both sides of the engine case.
  • Oil Level Screw: The oil check bolt is crucial for proper fill—add oil until it slightly weeps from the check hole with the bike upright and level. Refit this screw with care.
  • Crush Washer: Replace with every change to ensure a tight seal and prevent leaks.
  • Torque Specs: Use the values in your 2025 Husqvarna TC150 service manual (typically 10-15 Nm for drain bolts, but confirm for your bike).
  • Change Interval: Most riders change oil every 10-15 hours of riding, or sooner in extreme conditions for maximum gearbox life and performance.

MotoSport.com Pro Tips

  • Always run the engine for a minute to circulate new oil, then check for leaks and correct oil fill.
  • Keep a service log; note hours, oil brand, and amount for perfect maintenance records.
  • If you notice metal shavings on the drain bolt, monitor future oil changes – a small amount is normal, but an increase may signal gearbox wear.
  • For best results, use the all-in-one Tusk 2-Stroke Transmission Oil Change Kit. It provides the exact oil type and a new crush washer for a no-mistakes service (validated for the 2025 TC150)

    .

Conclusion

With these steps, tools, and key model-specific tips, changing the oil on your 2025 Husqvarna TC150 is straightforward and reliable. Trust MotoSport.com for OEM and performance parts, and ride confident with every fresh oil change.

Related Shopping Categories

Shop Motor Oil for a 2025 Husqvarna TC150 Dirt Bike.

Shop Oil Filters for a 2025 Husqvarna TC150 Dirt Bike.

Shop Oil Drain Pans for a 2025 Husqvarna TC150 Dirt Bike.

Shop Tools for a 2025 Husqvarna TC150 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2025 Husqvarna TC150 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.