How to Change the Oil in a 2024 Yamaha WR250F

Shop parts for a 2024 Yamaha WR250F Dirt Bike.

Keeping your 2024 Yamaha WR250F running strong means performing regular oil changes. This guide delivers every step you need, with detailed tips and specific call-outs for this make and model to help you avoid costly mistakes and maximize reliability. This article is proprietary to MotoSport.com.

Tools and Supplies Needed

  • 10mm, 12mm, and 8mm sockets or wrenches (for drain, tank, and engine guard bolts)
  • New oil filter (follow your owner’s manual for the correct part number)
  • YAMALUBE 10W-40 or equivalent engine oil (per manufacturer recommendation)
  • Oil drain pan
  • Gloves and shop rags
  • Torque wrench (optional but recommended for proper re-tightening)
  • Plastic or rubber tube (optional, for added mess control)
  • Funnel
  • Safety goggles
  • New crush washers/seals (recommended each oil change)
  • User’s manual (for quick reference of specs and capacities)

Steps to Change the Oil

  • Warm up the engine. Let the bike idle for 5-10 minutes to allow oil to thin and drain fully. Shut the engine down and let it cool until safe to touch.
    Note: This is especially crucial on the 2024 Yamaha WR250F, as it allows more thorough drainage and prevents cold oil from trapping debris in the cases.
    Sources note the importance of warming up the engine prior to draining oil.
  • Remove the Skid Plate. Use an 8mm socket to remove the bolts securing the engine guard/skid plate and set them aside.
    Tip: Place bolts in a magnetic tray or marked bin for ease of reinstallation.
  • Remove the Oil Filler Cap. Unscrew the oil filler cap on the right side of the engine. This aids faster draining by venting the system.
  • Locate and Remove Oil Drain Bolts.
    • Main crankcase drain bolt is on the lower right side of the engine; use a 12mm socket.
    • The 2024 WR250F uses an external oil reservoir (main frame “tank”). There's also a separate drain bolt, typically also 12mm, on the bottom of the reservoir frame tube.
    • Use a drain pan and remove the lower engine drain bolt. Allow oil to completely drain.
    • Next, remove the oil reservoir (frame) drain bolt and let it drain fully.
      Special Call-Out: If there is little or no oil flow from the reservoir, remove the breather bolt at the top of the reservoir. This venting step is critical on WR250Fs as it allows oil to flow freely.
  • Remove and Inspect the Oil Filter.
    • Unbolt the oil filter cover (10mm or 8mm bolts, depending on model year/accessory kit).
    • Remove the filter. Inspect for debris, metal filings, or abnormal residue.
    • Tip: Always install a new filter for every oil change. Filters are inexpensive insurance for your engine.
  • Check and Clean the Oil Screen (Strainer).
    • The WR250F features an internal oil strainer/filter screen, accessible on the oil reservoir side. Remove carefully (may require a 12mm wrench).
    • Spray clean with a parts cleaner or brake cleaner if you notice buildup.
    • Note: Cleaning the oil strainer every change is not usually necessary unless contaminants are found, but inspect as part of your regular routine.
  • Replace All Washers/Gaskets. Always use new crush washers on drain bolts to prevent leaks. The oil filter cover also uses an O-ring gasket; inspect and replace if damaged.
  • Reinstall Oil Filter and Bolts. Insert the new oil filter, checking the orientation (spring side faces out). Tighten the cover bolts evenly to spec.
  • Reinstall Drain Bolts. Thread in both engine and reservoir drain bolts by hand first, then torque to manufacturer specification (refer to owner's manual, generally 14–18 ft-lbs for Yamaha drain bolts).
  • Refill with Fresh Oil.
    • Using a funnel, slowly pour the appropriate quantity of YAMALUBE 10W-40 or equivalent into the oil filler. The 2024 WR250F holds approximately 1.0–1.1 liters with filter change (refer to your manual for exact measurement).
  • Check Oil Level.
    • Replace the filler cap and run the engine for a few minutes.
    • Shut the engine off, let it sit for one minute, and check the oil using the sight glass or dipstick (depending on model). Oil should be at the top mark when fully primed. Add oil as needed.
      Tip: The sight glass is on the lower right crankcase; oil level should be between the lines. If you overfill, drain excess out.
    • If using Yamaha's Power Tuner App, reset your oil change interval reminder as part of routine service.
  • Reinstall Skid Plate. Use the 8mm socket to reinstall your engine protection.
  • Inspect for Leaks. Let the bike run briefly, then check all bolts and areas for leaks. Tighten any weeping bolts and wipe away spilled oil.

Special 2024 Yamaha WR250F Call-Outs

  • Newer WR250F models (2020–2024) use a frame-mounted oil reservoir—ensure you locate both the crankcase and reservoir drain bolts.
  • Always vent the oil tank (remove breather bolt or dipstick) if oil doesn't flow well when draining the reservoir.
  • Oil change interval: Yamaha recommends oil changes every 7.5 hours of use and filter every 15 hours—however, many riders change both oil and filter every 4–5 hours (or after every other race/event), maximizing longevity.
  • Sight glass oil check: After refilling and startup, let the bike sit one minute before final level check. Overfilling can cause foaming and engine issues.
  • Do not overtighten plastic fasteners and covers to avoid cracking components.
  • Dispose of used oil and filters responsibly at your local recycling center.

Conclusion

The 2024 Yamaha WR250F's unique features—like the frame-mounted oil reservoir and dual drain bolts—make oil changes slightly more involved than some models, but following the above steps ensures a thorough, hassle-free job. Consistent oil changes will extend your engine's life and keep your WR250F performing at its best on every ride.

MotoSport.com—Your Trusted Source for All Yamaha WR250F Parts and Service Tips.

Related Shopping Categories

Shop Motor Oil for a 2024 Yamaha WR250F Dirt Bike.

Shop Oil Filters for a 2024 Yamaha WR250F Dirt Bike.

Shop Oil Drain Pans for a 2024 Yamaha WR250F Dirt Bike.

Shop Tools for a 2024 Yamaha WR250F Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2024 Yamaha WR250F Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.