"

How to Change the Oil in a 2024 Triumph TF 250-X

Shop parts for your ride now!

Changing the oil on your 2024 Triumph TF 250-X is a fundamental maintenance task that ensures optimal engine performance and longevity. Below, you'll find a robust, MotoSport.com proprietary guide to changing the oil, complete with a detailed tool list, step-by-step instructions, and specific call-outs unique to the TF 250-X model.

Tools and Parts Needed

  • Socket wrench set (ensure you have Torx bits, as certain bolts require them on this bike)
  • Oil drain pan
  • Replacement oil filter (Recommended: OEM Triumph TF250/450 Oil Filter Change Kit – T1210394)
  • New sealing washer for the drain plug
  • New O-rings (0.68 x 0.07 in and 0.49 x 0.06 in)
  • Recommended 10W/50 engine oil (per factory grade)
  • Funnel
  • Clean rags
  • Gloves

Key Call-Outs for the 2024 TF 250-X

  • Have Torx bits ready–not all bolts use traditional hex heads.
  • This model features an oil strainer plug and oil strainer in addition to a standard oil filter. Both the screen and the strainer must be cleaned during the oil change process.
  • Correct O-ring sizing and replacement is critical to prevent leaks: 0.68 x 0.07 in (17.17 x 1.78 mm) and 0.49 x 0.06 in (12.5 x 1.5 mm).
  • Always replace the sealing washer on the drain plug to avoid drips or seepage.
  • Ensure you use 10W/50 engine oil formulated for modern motorcycles for optimal engine protection.

Step-by-Step Oil Change Process

  1. Warm up the engine.
    Start your TF 250-X and let it idle for several minutes. Warm oil drains faster and more thoroughly, carrying away more contaminants. Fully shut off the engine and ensure the bike is upright and secure on a level surface.
    Important: Oil will be hot. Use care when draining.
  2. Position your drain pan.
    Place an oil drain pan directly beneath the engine's oil drain plug to catch all used oil.
  3. Remove the oil drain plug and sealing washer.
    Use the appropriate Torx or socket wrench to loosen and remove the oil drain plug located underneath the engine.
    Discard the old sealing washer – always install a fresh one during reassembly.
    Let the oil completely drain for best results.
  4. Remove the oil strainer plug and oil strainer.
    Next to the main oil drain, you will find an oil strainer plug. Remove this (Torx bit may be required).
    Remove the oil strainer itself and inspect for debris or metal shavings. Clean with solvent and dry thoroughly.
    Replace both O-rings (0.68 x 0.07 in and 0.49 x 0.06 in) as indicated in the manual for best seal integrity.
  5. Replace or clean the oil filter.
    Using the recommended Triumph TF250/450 Oil Filter Change Kit, remove the old filter. If a new OEM filter is used, simply install per included instructions and torque to factory spec.
    Lubricate the new filter's O-ring with a drop of clean oil before installing.
  6. Reinstall the strainer and plugs.
    Once the oil has ceased dripping and all parts are cleaned, reinstall the oil strainer and strainer plug (with new O-ring).
    Install the drain plug with a fresh sealing washer and torque to Triumph's specified rating.
  7. Add fresh oil.
    Using a funnel, fill the engine with the recommended quantity and grade of oil (10W/50). Refer to your owner's manual for exact capacity.
    Do not overfill.
  8. Check levels and leaks.
    Start the engine briefly, let it run for a couple minutes, then shut it off. Check the oil level and top up if necessary. Inspect all plugs and the oil filter area for leaks.
    Wipe away any oil residue and ensure the lower cases are clean.
  9. Properly dispose of used oil and filter.
    Collect all used oil and your old filter for recycling at your nearest authorized disposal center.

MotoSport.com Pro Tips for the 2024 Triumph TF 250-X

  • Break-in Oil Change: Change the oil after the first hour of operation for best long-term results, as recommended for new bikes to flush out break-in debris.
  • Debris Inspection: Inspect the strainer for any abnormal metallic particles that could indicate early engine wear.
  • Check Torx Requirements: The 2024 TF 250-X uses Torx-head drain plugs, so have Torx bits on hand.

Conclusion

Following this detailed oil change procedure will keep your 2024 Triumph TF 250-X running smoothly and reliably for many hours on the track or trail. Using the recommended OEM parts, the correct tools, and proper techniques ensures both warranty compliance and peak engine performance.

"