How to Change the Oil in a 2024 Husqvarna TE300
Shop Parts for a 2024 Husqvarna TE300 Dirt Bike.
Keeping your 2024 Husqvarna TE300 in top running shape means regular maintenance, and one of the most essential tasks is changing the transmission (gearbox) oil. Proper oil changes extend your bike’s life and ensure smooth shifts and optimal clutch performance. Here’s a comprehensive, MotoSport.com proprietary guide on doing it right for your 2024 TE300, including key tools, model-specific tips, and a full step-by-step process.
Tools & Materials Needed:
- Socket wrench set (check owner’s manual for bolt sizes)
- Torque wrench (for proper tightening of drain and fill bolts)
- Drain pan (capacity at least 1 quart/liter)
- Fresh oil (full synthetic 15W-50, as recommended for the 2024 TE300)
- New crush washer for the drain bolt (replace every change if possible)
- Funnel (preferably flexible and clean)
- Gloves and shop towels for cleanup
Model-Specific Call-outs for 2024 Husqvarna TE300
- The 2024 TE300 uses a modern two-stroke engine with a separate transmission (gearbox) oil compartment—not premixed with fuel.
- The oil fill and oil level check are done via designated bolts/holes on the right side of the engine; always use the oil level/check bolt to gauge when the case has reached the correct quantity.
- Recommended change interval: every 10 hours or after hard rides to keep wear metals down and clutch action smooth .
- Always inspect the magnetic drain bolt for metal debris and clean it thoroughly before reinstallation .
Step-by-Step Instructions:
-
Warm up the engine
Start and idle the bike a few minutes, then shut it off. This thins the oil for a better drain and suspends contaminants for easier removal.
-
Stabilize the bike
Stand the TE300 upright on a stable bike stand. This ensures all oil drains completely from the case and reduces the risk of spills.
-
Remove skid plate/plastics (if needed)
On the 2024 TE300, the stock bash plate is held by two screws per side—remove these so you can access the drain bolt easily.
- Place the drain pan under the drain bolt (bottom right side of the engine).
-
Remove the oil fill and drain bolts
Loosen the oil fill bolt first (top right side of the engine case) for smoother draining. Use a socket wrench to remove the drain bolt and let old oil flow into the pan. Be careful—the engine may still be hot.
-
Inspect and clean the drain bolt
The 2024 TE300 uses a magnetic drain bolt. Wipe off all metal shavings or debris from the tip. Replace the copper crush washer if worn or after every oil change.
-
Let the oil drain fully
Let the bike sit vertical until oil ceases to drip—this may take a few extra minutes for a thorough change.
-
Reinstall the drain bolt
Thread the bolt in by hand, then snug with a wrench. Torque it to spec (typically 11 ft-lbs/15 Nm–confirm in your manual for the ‘24 TE300).
-
Add fresh gearbox oil
Slowly pour new 15W-50 synthetic oil into the fill hole. The TE300 uses approximately 0.8 liters (check your manual for exact spec). Stop when oil just starts to trickle out the level check bolt hole.
-
Replace oil level and fill bolts
After letting excess oil drain from the level check hole, reinstall both bolts and torque to spec (level check bolt generally 7 ft-lbs/10 Nm).
-
Double-check installation
Wipe any oil residue, ensure all bolts are secure, and that the crush washer isn’t leaking.
- Refit skid plate/plastics if removed.
- Start the bike and check for leaks while idling—if all looks good, you’re set to ride.
Owner Tips for the 2024 TE300:
- Always let your used oil cool before disposal. Dispose of it at a proper recycling facility.
- Monitor for metal shavings on the drain plug: a paste-like residue is normal after break-in, but large flakes can indicate trouble.
- Check oil level after first start-up by rechecking the level bolt (with the bike vertical and engine off).
- Consider an hour meter to stay on top of oil intervals, especially for aggressive riding.
In Summary
Changing the gearbox oil in your 2024 Husqvarna TE300 is a straightforward job with the right tools and a careful approach. Using the recommended 15W-50 synthetic oil, new crush washers, and factory torque specs will keep your engine shifting and performing in top condition all season long.
Related Shopping Categories
Shop Motor Oil for a 2024 Husqvarna TE300 Dirt Bike.
Shop Oil Filters for a 2024 Husqvarna TE300 Dirt Bike.
Shop Oil Drain Pans for a 2024 Husqvarna TE300 Dirt Bike.
Shop Tools for a 2024 Husqvarna TE300 Dirt Bike.
Shop Oil Filler and Drain Plugs for a 2024 Husqvarna TE300 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.