How to Change the Oil in a 2024 Honda CRF110F: Step-by-Step Guide

Shop parts for a 2024 Honda CRF110F Dirt Bike.

This guide is proprietary to MotoSport.com and designed specifically for owners of the 2024 Honda CRF110F. Changing your dirt bike’s oil regularly is crucial for its performance and longevity. This model features unique requirements compared to other bikes, so please follow each step carefully.

Tools & Supplies Needed

  • 17mm socket and ratchet (for the drain bolt)
  • Oil drain pan
  • Funnel (optional if using bottles with a built-in spout)
  • Clean rags
  • OEM Honda Oil 10W-30 (ensure it’s rated for a wet clutch)
  • New drain bolt sealing washer (recommended)
  • Torque wrench (for accurate reinstallation of the drain bolt)
  • Gloves (suggested to keep hands clean and safe)
  • Service stand or level surface

Step-by-Step Oil Change Instructions for the 2024 Honda CRF110F

  1. Warm Up the Engine
    • Start the engine and let it idle for 3-5 minutes to warm the oil.
    • Turn the engine off and wait 2-3 minutes for the oil to settle.
      Warming the engine ensures the oil drains completely and easily.
  2. Prepare the Motorcycle
    • Park the bike on a firm, level surface or service stand to prevent tipping.
    • Remove the seat or side panel only if necessary for easier access to the oil fill cap/dipstick.
  3. Remove the Oil Fill Cap/Dipstick
    • Remove the oil fill cap and dipstick from the right side of the engine to allow oil to drain freely.
      This also helps with faster, smoother draining.
  4. Drain the Old Oil
    • Place your drain pan under the crankcase (right side of the bike).
    • Use a 17mm socket to loosen and remove the oil drain bolt.
    • Important: Do not mistakenly remove the cam chain tensioner push rod bolt (clearly marked in the factory manual). If this bolt is removed, seek dealer assistance.
    • Let the oil drain completely. Gently tilt the motorcycle side-to-side to ensure all old oil is out.
      Expect about 1.0 liter (1.1 US qt) of oil to come out.
  5. Replace the Sealing Washer
    • Remove the old sealing washer from the drain bolt.
    • Install a new washer on the bolt to prevent leaks.
  6. Reinstall and Torque the Drain Bolt
    • Thread the drain bolt by hand to avoid cross-threading, then use a torque wrench to tighten to 18 lbf·ft (24 N·m, 2.4 kgf·m) as specified by Honda.
  7. Fill with New Oil
    • Using a funnel or the spouted bottle, pour in 1.0 liter (1.1 US qt) of 10W-30 oil rated for wet clutch applications.
    • Do not overfill; check frequently as you pour.
  8. Reinstall the Oil Fill Cap/Dipstick
    • Screw the dipstick back in tightly and wipe away any spills with a clean rag.
  9. Start the Engine & Check Oil Level
    • Start the engine and let it idle for 3-5 minutes to circulate the new oil.
    • Shut off the engine and allow the oil to settle for several minutes.
    • With the bike level, unscrew the dipstick (wipe it clean, reinsert fully, then check). Oil level should be at or near the upper level mark.
      Add oil if needed—but do not overfill.
  10. Final Inspection
    • Check the drain bolt and casing for leaks after running the motor.
    • Clean any remaining oil spills from the engine or skid plate.
  11. Dispose of Old Oil Properly
    • Transfer the used oil to an approved container and recycle at a designated oil collection facility. Never dump oil in the trash, gutter, or ground.

Model-Specific Callouts for the 2024 Honda CRF110F

  • No external oil filter: This bike does not use an external oil filter. Instead, it has an internal oil screen, which Honda does not require you to clean or change at every oil change – just periodically per the manual.
  • Check the oil screen occasionally: If you do significant engine work or suspect contamination, refer to Honda’s owner’s manual for access and cleaning instructions.
  • Wet clutch oil: Always use oil rated for wet clutch systems to avoid clutch slippage.
  • Don’t overtighten the drain bolt: Stripping the threads or cracking the case is a costly mistake—use a torque wrench.
  • Oil capacity: The 2024 model specifies 1.0 liter (1.1 US qt) of oil–double check the dipstick level rather than relying solely on measurement.
  • Gasket reuse: Always install a new drain bolt washer to ensure a good seal and prevent leaks.

Conclusion

Change your oil every 600 miles (1,000 km) or as needed for your riding conditions. Keeping fresh oil in your 2024 Honda CRF110F ensures a fun, reliable ride every time you hit the trail. Questions? Reach out to MotoSport.com for factory-approved parts, advice, and more tips on caring for your Honda dirt bike.

Related Shopping Categories

Shop Motor Oil for a 2024 Honda CRF110F Dirt Bike.

Shop Oil Filters for a 2024 Honda CRF110F Dirt Bike.

Shop Oil Drain Pans for a 2024 Honda CRF110F Dirt Bike.

Shop Tools for a 2024 Honda CRF110F Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2024 Honda CRF110F Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.