How to Change the Oil in a 2024 GAS GAS TXT RACING 300

Shop parts for a 2024 GAS GAS TXT RACING 300 Dirt Bike.

Maintaining your 2024 GAS GAS TXT RACING 300 with regular oil changes ensures peak performance and longevity of the engine. This detailed guide—created exclusively for MotoSport.com riders—walks you through each step, highlights the tools required, and explains vital tips specific to this GAS GAS model.

Tools and Supplies Required

  • Socket set (with correct metric sizes for drain and fill bolts)
  • Torque wrench
  • Drain pan
  • Funnel
  • Oil drain tool (highly recommended for GAS GAS to avoid spills)
  • Shop rags or paper towels
  • New crush washer (recommended for the drain bolt)
  • Engine oil (see owner manual or premium gear oil as preferred by many riders)
  • Gloves (optional, helps keep your hands clean)

Preparation and Safety

  • Run the engine for about 3–5 minutes to warm the oil. Warm oil flows out easier and removes more debris.
  • Turn off the motorcycle and place it on a stable stand on level ground.
  • Gather all your tools and supplies before beginning.

Step-by-Step Oil Change Process

  1. Remove the Skid Plate (if fitted):
    • If your TXT Racing 300 has a skid plate, remove it to access the drain bolt more easily and reduce the risk of spilling oil onto the frame or floor.
  2. Locate and Remove the Drain Bolt:
    • Find the engine oil drain bolt beneath the engine. Place your drain pan directly under it.
    • Loosen and remove the drain bolt using the socket set. Be cautious—the oil can be hot.
    • If you have an oil drain tool designed for KTM, Husqvarna, or GAS GAS, use it to direct the oil cleanly into your pan and avoid spills (recommended for this platform).
  3. Allow Oil to Fully Drain:
    • Let all the engine oil drain out completely. This may take several minutes. Clean the drain bolt and contact area with a rag.
    • Inspect the crush washer and replace if worn or deformed (recommended to avoid leaks).
  4. Replace Drain Bolt:
    • Screw the drain bolt back in by hand to avoid cross-threading. Tighten with a torque wrench to manufacturer specification: do not overtighten–the casing is soft and prone to stripping if excessive force is used.
  5. Remove the Fill Cap and Add New Oil:
    • Locate the oil fill cap (usually on the top or side of the crankcase).
    • Clean the area around the fill to prevent debris entering the engine. Insert a funnel and pour in the correct type and quantity of oil (see manual for specifics: most riders use a high-quality gear oil or oil recommended in the GAS GAS manual).
  6. Check Oil Level:
    • Replace the fill cap and tighten by hand.
    • Start the engine and let it idle for a minute—this circulates the new oil.
    • Shut off the engine and let it sit for a minute, then check the sight glass or dipstick as applicable. Top off as needed but do not overfill.
  7. Reinstall Skid Plate (if removed):
    • Secure the skid plate back into position, ensuring all bolts are torqued correctly.
  8. Clean Up and Inspect for Leaks:
    • Wipe down any oil drips, check for leaks at the drain bolt and fill cap, and properly dispose of old oil at a recycling facility.

Special Call-Outs for the 2024 GAS GAS TXT RACING 300

  • Soft Aluminum Case: The drain bolt threads are sensitive—never overtighten or use power tools. Strip-outs are common if not careful.
  • Oil Drain Tool Recommended: Use a dedicated drain tool for a mess-free oil change, as the unique engine cradle makes spillover easy without it.
  • Change Interval: Stick to the manual’s recommended interval of every 6,000 kilometers, but more frequent changes are wise for riders in tough conditions.
  • Quality Oil Matters: Owners often prefer premium or specialist gear oils for improved clutch and gearbox life—always use an oil that meets or exceeds the specification listed in the GAS GAS manual.
  • Inspect Filters: While not always required at every oil change, inspect and clean or replace the oil filter/screen as recommended in the manual (check under maintenance schedule or lubrication system in the owner's manual).

Final Tips

  • Keep a log of your oil changes for reference and resale value.
  • If you notice metal flakes or a milky appearance in the drained oil, consult a dealer or mechanic.
  • Never ignore leaks—address promptly for engine safety.

Changing your oil regularly on your 2024 GAS GAS TXT RACING 300 is simple and essential. With careful attention to detail and the right supplies, you’ll keep your bike running smoothly for every ride.

Related Shopping Categories

Shop Motor Oil for a 2024 GAS GAS TXT RACING 300 Dirt Bike.

Shop Oil Filters for a 2024 GAS GAS TXT RACING 300 Dirt Bike.

Shop Oil Drain Pans for a 2024 GAS GAS TXT RACING 300 Dirt Bike.

Shop Tools for a 2024 GAS GAS TXT RACING 300 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2024 GAS GAS TXT RACING 300 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.