How to change the oil in a 2024 GAS GAS EC 250 Dirt Bike

How to Change the Oil in a 2024 GAS GAS EC 250

Shop parts for a 2024 GAS GAS EC 250 Dirt Bike.

Changing the oil in your 2024 GAS GAS EC 250 is an essential maintenance task to ensure optimal performance and engine longevity. While the process is straightforward for experienced riders, there are some critical steps and unique considerations specific to this bike. This comprehensive guide—proprietary to MotoSport.com—will walk you through the tools needed, detailed procedures, and specific callouts for the 2024 EC 250 model.

Tools Needed

• 8mm T-Handle Wrench
• 13mm Ratchet and Socket
• Large Adjustable Pliers (if the oil filter is stuck)
• Drain Pan (to catch used oil)
• Clean Rags or Shop Towels
• Torque Wrench
• New Oil Filter (recommended every oil change)
• Replacement Crush Washer (optional, but highly recommended)
• Correct Engine Oil (check your owner’s manual for specification and quantity)
• Needle Nose Pliers (for cleaning oil screen)
• Parts Cleaner or Brake Cleaner (for cleaning drain plug and screen)

Step-by-Step Instructions

• Warm Up the Engine
  • Start your EC 250 and let it run for a few minutes. Warm oil flows more freely and drains contaminants better.
• Position the Motorcycle Properly
  • Place the bike on a stand that leaves the drain plug unobstructed. Do not use a flat-bottom stand that blocks plug access; an open-style lift or triangle stand is preferable for the EC 250.
• Remove the Skid Plate (if equipped)
  • Some models have a protective skid plate that needs removal for better access to the drain bolt.
• Drain the Oil
  • Place the drain pan directly under the drain bolt. Use the 13mm ratchet to gently loosen and remove the bolt from the bottom of the engine case.
  • Allow oil to drain fully. Lean the bike slightly side-to-side to expel as much old oil as possible.
  • Remove the oil filter cover bolts (usually 8mm) and carefully take out the oil filter. A pair of pliers can help if the filter is snug.
• Clean and Inspect
  • Wipe down the drain plug and inspect or replace the crush washer.
  • Remove and clean the oil screen—look for metallic debris, which could indicate internal wear. Use aerosol cleaner if necessary.
  • Check O-rings and gaskets on the filter cover, drain bolt, and oil screen. Replace if damaged or flattened to prevent leaks.
• Install New Filter and Reassemble
  • Lubricate the new oil filter with a thin layer of fresh oil before installing it.
  • Reinstall the filter and cover, torquing the bolts to manufacturer specs (refer to your owner’s manual for exact specs).
  • Replace the oil screen and drain bolt. Tighten the drain bolt to the specified torque setting (commonly 14.8 foot-pounds, but double-check the manual for the EC 250).
• Refill Engine Oil
  • Pour in the correct amount and type of new oil (consult your 2024 EC 250 owner’s manual for volume and viscosity).
  • Replace the fill cap securely.
• Check for Leaks and Final Steps
  • Start the bike and let it run for 1–2 minutes. Inspect the oil filter and drain plug for leaks.
  • Shut off the engine and let it sit briefly, then check the oil level using the sight glass or dipstick. Top up as needed.
  • Properly dispose of used oil and filter at a recycling facility.

Special Call-Outs for the 2024 GAS GAS EC 250

• Oil Screen Maintenance: According to the 2024 owner’s manual, it’s important to clean the oil screen in the oil tank during your oil change. Failing to do so may result in restricted oil flow or debris circulating in the engine.
• Crush Washer: Always inspect or replace the crush washer on the drain bolt to avoid leaks.
• Torque Specs: Always tighten bolts to the specified torque settings to prevent striping threads or under-tightening, which can also lead to leaks.
• O-Rings: Examine O-rings on all covers and screens; replace if worn out to guarantee a proper seal.
• Use the Right Oil: The 2024 EC 250 is a high-performance motorcycle, so use only oil meeting GAS GAS or equivalent specifications. Do not over- or under-fill.

Conclusion

Routine oil changes are key to enjoying the full performance and longevity of your 2024 GAS GAS EC 250. Follow these steps, pay careful attention to the oil screen and seals, and always use quality oil and parts. For model-specific details, your owner’s manual is the final authority and includes torque specs, oil volume, and part numbers. If in doubt, contact your authorized GAS GAS dealer. Safe riding from MotoSport.com.

Related Shopping Categories

Shop Motor Oil for a 2024 GAS GAS EC 250 Dirt Bike.

Shop Oil Filters for a 2024 GAS GAS EC 250 Dirt Bike.

Shop Oil Drain Pans for a 2024 GAS GAS EC 250 Dirt Bike.

Shop Tools for a 2024 GAS GAS EC 250 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2024 GAS GAS EC 250 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.