How to Change the Oil in a 2023 Yamaha TTR110: A MotoSport.com How-To Guide
Shop parts for a 2023 Yamaha TTR110 Dirt Bike.
Regular oil changes are essential to keep your 2023 Yamaha TTR110 running strong and reliable. This robust step-by-step guide covers the specific requirements for your machine, each tool you'll need, and tips unique to the TTR110 platform. Whether you're a new rider or an experienced wrench, follow these instructions to protect your investment and ensure top performance mile after mile.
Tools and Supplies Needed
- 10W-40 motorcycle oil (Yamalube recommended) — 28 fluid ounces
- 12mm socket or wrench
- Oil catch pan or container
- Funnel (for pouring new oil)
- Clean rags or paper towels
- Measuring cup or marked oil container
- Gloves (optional, but recommended)
- Pliers (if the drain bolt is stubborn)
- Replacement drain bolt washer (recommended, but not always necessary)
2023 Yamaha TTR110 Specific Call-Outs
- No oil filter: The TTR110 skips an oil filter, simplifying the process, but making timely changes even more important for engine longevity.
- Oil capacity: Add exactly 28 fluid ounces (approx. 825ml) of 10W-40 motorcycle oil. Overfilling or underfilling can cause performance issues or damage.
- Model year consistency: The oil change process for the 2023 TTR110 is the same as for previous years dating back to 2012, due to Yamaha–s unchanging design over the last decade.
- Check the dipstick carefully: Oil level must be between the marks on the dipstick after the engine has idled and sat for a few minutes. Too much oil can cause leaks or running issues.
Step-by-Step Oil Change Instructions
-
Warm Up the Engine
Start the TTR110 outdoors and let it idle for 5–10 minutes. This warms the oil, allowing it to flow out smoothly and carry more contaminants with it. -
Prepare Your Workspace
Place the dirt bike upright on a stable stand. Put your oil catch pan underneath the engine drain bolt. -
Remove the Drain Bolt
Use your 12mm socket or wrench to loosen and remove the oil drain bolt from the underside of the engine. Be careful as the oil might be hot. Let all the oil drain completely — this may take a few minutes. -
Inspect and Replace the Drain Bolt Washer
Check the crush washer on the drain bolt for signs of wear or deformation. Replace if necessary to ensure a snug, leak-free fit. -
Reinstall the Drain Bolt
Wipe the area clean, then reinstall the drain bolt by hand to avoid cross-threading. Tighten snugly with your wrench but do not overtighten. -
Add New Oil
Pour 28 fluid ounces of 10W-40 motorcycle oil into the engine using your funnel. If your oil container isn’t marked, measure using a cup or mark a line to ensure you don’t overfill. Yamaha recommends Yamalube for best performance, but high-quality 10W-40 suitable for motorcycles is acceptable. -
Check the Oil Level
With the bike level, insert the dipstick without screwing it in. The oil should be between the upper and lower marks. If low, add oil in small increments and recheck. If overfilled, carefully loosen (without fully removing) the drain bolt to let out a small amount, then recheck. -
Run and Settle
Start the engine and let it idle for a minute or two. Shut it off and wait several minutes for the oil to settle back down. Check the level one final time and top off if needed. -
Dispose of Old Oil Properly
Never pour used oil down drains or onto the ground. Take your oil to a certified recycling or hazardous waste center, your local Yamaha dealer, or an auto parts store that offers oil recycling. -
Finishing Touches
Clean all tools and wipe down any spilled oil. Record your oil change date and hours ridden to keep on a regular maintenance schedule.
Pro Tips for 2023 TTR110 Oil Change
- Never overfill: Too much oil can cause leaks or engine problems, including blow-by and damage to the airbox. Always check after the bike has idled and the oil has settled.
- Timely changes: Without an oil filter, change your oil at Yamaha's suggested intervals — or sooner if riding in dirty, dusty, or wet conditions.
- Use quality oil: While many brands work, genuine Yamalube is formulated specifically for Yamaha dirt bikes and offers reliable performance.
- Reset your maintenance tracker: If you're using a log or an hour meter, update it now to keep track of future oil changes.
With the right tools and careful attention, changing the oil on your 2023 Yamaha TTR110 is easy and can significantly extend the life of your bike. Enjoy a smooth, reliable ride every time you hit the track or trail.
Related Shopping Categories
Shop Motor Oil for a 2023 Yamaha TTR110 Dirt Bike.
Shop Oil Filters for a 2023 Yamaha TTR110 Dirt Bike.
Shop Oil Drain Pans for a 2023 Yamaha TTR110 Dirt Bike.
Shop Tools for a 2023 Yamaha TTR110 Dirt Bike.
Shop Oil Fillers and Drain Plugs for a 2023 Yamaha TTR110 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.