How to Change the Oil in a 2022 KTM 300XC TPI

Shop parts for a 2022 KTM 300XC TPI Dirt Bike.

Changing the oil in your 2022 KTM 300XC TPI is an essential maintenance task that ensures your transmission and engine keep operating at peak performance. This step-by-step guide—proprietary to MotoSport.com—covers everything you need to know, with specific callouts for your dirt bike model to help you get professional results every time.

Tools and Supplies Needed

  • 10mm and 12mm socket or wrench (drain/fill plug size may vary, check your bike)
  • Drain pan
  • Funnel
  • New crush washer (recommended but optional)
  • Clean rags
  • Torque wrench
  • 800 ml bottle of 10W-50, JASO MA/MA2 rated oil (OEM spec, see callouts for notes)
  • Parts/brake cleaner (for cleaning residue, optional)
  • Bike stand or lift
  • Gloves (optional for cleanliness)

Step-by-Step Oil Change Instructions

  1. Warm Up the Engine
    • Run the engine for 3–5 minutes to warm the oil. This helps it drain more thoroughly. Shut off the bike before proceeding.
  2. Place the Bike on a Stand
    • Ensure the motorcycle is on a level surface and stable using a bike stand. A level bike is vital for accurate draining and filling.
  3. Remove Skid Plate (if equipped)
    • If your 300XC TPI has a skid plate, remove it for access to the drain plug.
  4. Remove the Oil Fill Cap
    • Locate on the right side of the engine and unscrew it. This helps the oil drain more smoothly.
  5. Locate and Remove the Drain Plug
    • Find the 12mm drain plug underneath the transmission side of the engine. Place a drain pan under it, and carefully loosen the drain bolt.
    • Allow oil to drain completely; it may take a few minutes for all fluid to escape.
    • Inspect and replace the crush washer on the drain plug to prevent leaks.
  6. Clean and Reinstall the Drain Plug
    • Wipe any metal filings from the magnet on the drain plug.
    • Screw the plug back in by hand, then torque to manufacturer spec (usually around 15 Nm / 11 ft-lb). Do not overtighten.
  7. Add New Oil
    • Place a funnel in the oil fill hole.
    • For 2022 KTM 300XC TPI, the typical oil capacity is 700–800 ml. However, always refer to the owner’s manual for the exact figure (most 2021/2022 TPI models use around 720 ml due to a forward-rotated engine adjustment, which slightly increased oil capacity compared to earlier models).
    • Slowly pour in oil, stopping just short of the full amount and checking the oil level screw.
  8. Check the Oil Level
    • On the right side of the engine, locate the oil level inspection screw (a small bolt at a set height on the case).
    • With the bike perfectly level, add oil until it just starts to seep from the oil level hole.
    • Reinstall and gently snug the oil level screw.
  9. Clean Up and Reinstall Skid Plate
    • Wipe off any spilled oil from the case/frame. Brake cleaner helps remove stubborn spots.
    • Reinstall the skid plate if you removed it earlier.
    • Double-check drain and level screws for tightness (not overtightened).
    • Install the oil fill cap.
  10. Start the Motorcycle
    • Briefly start and idle the engine, then shut it off and check for leaks around the drain and fill plugs.
    • If none, you're ready to ride.

Model-Specific Callouts for the 2022 KTM 300XC TPI

  • Oil Capacity Change: The 2022 (and 2021) 300XC TPI engine is rotated forward compared to 2020 and earlier, slightly increasing oil capacity (recommended: 720 ml vs 700 ml previously).
  • Inspection Bolt Location: The oil level inspection screw sits on the right side; the rear brake spring may partially obstruct your view, but does not need to be removed for the oil change itself.
  • Oil Change Interval: While KTM's manual suggests longer intervals, most experienced owners recommend an oil change every 10-15 hours of riding, especially for high-performance or muddy use, as oil changes on KTM two-strokes are inexpensive and quick.
  • Recommended Oil: Use a quality 10W-50 JASO MA or MA2 oil. Some riders prefer synthetic blends for extra protection. The manufacturer may list 15W-50 as an option. Aftermarket brands (e.g., AMSOIL) are popular but always confirm compatibility for wet clutches and internal gears.
  • Disposal: Never pour used oil down the drain. Bring it to a local recycling center or auto parts store with an oil collection program.

Pro Tips from MotoSport.com

  • If the oil is extremely dirty or has visible debris, consider performing a quick first flush: fill with clean oil, run the engine for 5–10 minutes, and perform a second drain.
  • Mark your oil change interval on the bike or in a log—you'll have a reliable record for future maintenance.
  • Clean around the fill area before you open the oil cap to prevent dirt from falling inside.

Regular oil changes are the keys to preserving your 2022 KTM 300XC TPI. Follow these steps, use the recommended products, and enjoy confidence on every ride. For all your KTM maintenance needs, check out the latest tools and supplies on MotoSport.com.

Related Shopping Categories

Shop Motor Oil for a 2022 KTM 300XC TPI Dirt Bike.

Shop Oil Filters for a 2022 KTM 300XC TPI Dirt Bike.

Shop Oil Drain Pans for a 2022 KTM 300XC TPI Dirt Bike.

Shop Tools for a 2022 KTM 300XC TPI Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2022 KTM 300XC TPI Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.