How to Change the Oil in a 2022 Kawasaki KLX110: Step-by-Step Guide

Shop parts for a 2022 Kawasaki KLX110 Dirt Bike.

Changing the oil in your 2022 Kawasaki KLX110 is an essential maintenance task to keep your dirt bike running smoothly and ensure the longevity of your engine. This comprehensive guide, proprietary to MotoSport.com, will walk you through everything you need to know, including the recommended tools, step-by-step instructions, and specific call-outs unique to the 2022 KLX110.

Tools and Parts Needed

  • 3/8” ratchet and extension
  • 8mm socket
  • 12mm socket
  • 17mm socket
  • Torque wrench
  • Oil drain pan
  • High-quality 10W-40 motorcycle oil (1 liter for oil and filter change, 0.9 liter for oil-only change)
  • Oil filter (KN-112 or equivalent recommended)
  • Clean rags
  • Gloves (optional, for cleanliness)

Prep Work Before You Begin

  • Ensure your bike is on a stable, level surface with the engine turned off and cool to the touch.
  • If you have recently run the engine, let it cool slightly before working. However, warm oil drains more thoroughly, so run the bike for about 2–3 minutes to circulate the oil before draining.

Step-By-Step Instructions

  1. Remove the Skid Plate
    • Use your 8mm socket to remove the bolts on each side of the skid plate.
    • Use your 12mm socket to remove the two bolts behind the skid plate and carefully take off the skid plate itself.
    • Specific to 2022 KLX110: Take extra care if the motor is still warm, as the exhaust pipe can be hot to the touch.
  2. Drain the Oil
    • Locate the 17mm drain bolt under the engine and position your oil drain pan directly below it.
    • Carefully loosen the drain bolt with your 17mm socket and allow all the oil to drain out. Be patient — let it fully drip out to remove as much old oil as possible.
    • Once drained, inspect the drain bolt and its crush washer. Replace the washer if damaged.
    • Reinstall the drain bolt and torque it to the manufacturer’s specification (consult your manual for the torque value).
  3. Remove and Replace the Oil Filter (Optional but recommended)
    • On the 2022 KLX110, the oil filter is accessible on the right side of the engine. If changing, remove the filter cover bolts with the appropriate socket.
    • Take out the old filter and ensure O-rings stay in place or are replaced if worn.
    • Install the new filter (KN-112 or equivalent recommended). Note: Some owners prefer the KN filter for its larger oil flow capacity compared to the Tusk filter.
    • Reinstall the filter cover and torque the bolts to the correct spec.
  4. Fill with Fresh Oil
    • Remove the oil filler cap (on the top of the engine).
    • If you changed the oil filter, pour in 1 liter of high-quality 10W-40 motorcycle oil. If only changing the oil and leaving the filter, use 0.9 liters.
    • Reinstall the oil filler cap and wipe off any residual oil.
  5. Check Oil Level
    • Start the engine and let it idle for about 2–3 minutes. Shut it off and let it sit for a few minutes to allow oil to settle.
    • On a level surface, check the oil level using the sight glass on the engine’s side. The oil should be between the upper and lower marks. Top off if necessary.
  6. Reinstall the Skid Plate
    • Reattach the skid plate using the 8mm and 12mm bolts you removed earlier. Ensure all bolts are tightened properly.
  7. Dispose of Old Oil Responsibly
    • Take your used oil to a local recycling center, auto parts shop, or hazardous waste facility.

KLX110 (2022) Model-Specific Call-Outs

  • First oil change is critical at 5 hours of use, then every 50 hours or annually thereafter, whichever comes first.
  • The 2022 KLX110 has both clutch and non-clutch versions, but the oil change process is identical for both.
  • If comparing oil filters, some owners prefer the KN-112 filter over the Tusk filter due to larger internal oil passages, possibly providing better oil flow.
  • Do not over-tighten the drain bolt or oil filter cover bolts, as the aluminum threads in the case are easily damaged.
  • Always properly align and seat O-rings on the filter cover to prevent leaks.

Pro Tips for a Successful Oil Change

  • Warming up the engine first lets oil drain more completely, flushing out contaminants.
  • Use a funnel to avoid spills when pouring new oil.
  • Keep thorough maintenance records including dates and oil type used.
  • Always use motorcycle-specific oil, as automotive oils lack additive packages for wet-clutch dirt bikes.

For high-quality parts, oil, filters, and expert support for your 2022 KLX110, trust MotoSport.com.

Related Shopping Categories

Shop Motor Oil for a 2022 Kawasaki KLX110 Dirt Bike.

Shop Oil Filters for a 2022 Kawasaki KLX110 Dirt Bike.

Shop Oil Drain Pans for a 2022 Kawasaki KLX110 Dirt Bike.

Shop Tools for a 2022 Kawasaki KLX110 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2022 Kawasaki KLX110 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.