How to Change the Oil in a 2020 Husqvarna 701 Enduro

Shop parts for a 2020 Husqvarna 701 Enduro Dirt Bike.

Changing the oil regularly on your 2020 Husqvarna 701 Enduro is crucial for ensuring engine longevity and top performance, especially if you ride in challenging conditions. Below you'll find a step-by-step guide, including all the tools you'll need and important call-outs specific to this model.

Tools and Materials Needed

  • 2 liters of Motorex 10W/50 engine oil (or equivalent meeting manufacturer specification)
  • Husqvarna 701 Oil Filter Kit (usually includes two oil filters, two drain plug washers/gaskets, two screens)
  • 13mm socket and ratchet
  • T30 Torx (Star) bit/socket
  • Oil catch pan
  • Funnel (for pouring oil)
  • Gloves and rags (for safety and clean-up)
  • Flathead screwdriver or small pick (helpful for filter removal and cleaning screens)

Preparation

  • Start the engine and let it idle for several minutes to warm the oil. This helps it flow out smoothly when drained.
  • Ensure the bike is upright and stable, preferably on a stand.
  • Have all tools and new parts within easy reach.

Step-by-Step Oil Change Process

  1. Remove the Skid Plate (if equipped):
    • Most Husqvarna 701 models are fitted with a skid plate. Remove this first for easy access to the drain plugs.
  2. Locate and Remove Drain Plugs:
    • There are two drain plugs on the Husqvarna 701 Enduro. Both require a 13mm socket to remove.
    • Place the oil catch pan under the engine and remove the first (front) drain plug, then the second (side) plug.
    • Let the oil drain completely.
  3. Remove and Clean Oil Screens:
    • Each drain plug contains a mesh oil screen. Gently pull these out with pliers or a pick, being careful not to damage them.
    • Clean the screens with solvent and inspect for metal debris, which could indicate internal engine wear.
  4. Replace Oil Filters:
    • The 701 uses two oil filters. Each is accessed via a T30 Torx bolt cover – one on each side of the engine.
    • Carefully remove the covers. If the filters don't slide out easily, gently prise them with a flathead screwdriver.
    • Insert the new filters from your oil change kit, ensuring they seat properly.
  5. Install New Washers/Gaskets:
    • Replace the crush washers on both drain plugs with new ones from your kit. This helps prevent future oil leaks.
    • Reinstall the cleaned oil screens and both drain plugs. Tighten them to manufacturer torque specifications.
  6. Add New Engine Oil:
    • With the funnel, pour in approximately 1.7 liters of new engine oil.
    • Check the sight glass to verify the oil level; it should be between the minimum and maximum marks.
    • Reinstall the oil filler cap.
  7. Final Steps:
    • Start the bike and let it idle for a few minutes. Check for leaks around the drain plugs and filter covers.
    • Turn the engine off and let it sit for a minute. Check oil level again and top off as needed, usually bringing the total close to 1.9 liters, but not exceeding the max mark on the sight glass.
    • Dispose of old oil and filters at a certified recycling facility.
    • Reinstall the skid plate if applicable.

2020 Husqvarna 701 Enduro Model-Specific Call-outs

  • Dual drain plug and filter system: Unlike many single-cylinder bikes, the 701 uses two oil filters and two oil screens for comprehensive lubrication and filtration. Do not overlook either, as skipping one can result in poor oil flow or engine damage.
  • Oil capacity and measurement: The full capacity is approximately 1.9 liters, but always fill incrementally and check via the sight glass to prevent overfilling, which can lead to engine issues.
    Reference: In practice, adding 1.7 liters, starting the engine to circulate oil, then topping up the last 0.2 liters ensures proper oil fill for this specific motor.
  • Filter and screen access: The filters can be a tight fit; use care when prying them out to avoid damaging the sealing surfaces.
    Reference: Using small flathead screwdrivers or picks gently is recommended.
  • Torque specifications: Always confirm the correct torque for drain plugs and cover bolts – overtightening can strip threads in the engine case; undertightening can lead to leaks. Refer to your owner's manual for specifics.
  • First oil change interval: The initial factory oil change is required at 620 miles (1,000 km), then every 6,200 miles (10,000 km), or more frequently with hard use or racing.
    Reference: Manufacturer recommendation for the Husqvarna 701 series.

Pro Tips

  • Use a good-quality funnel to avoid spills; the oil fill opening is situated high and slightly angled.
  • Always shake the oil bottles to get every last bit out, as the model is sensitive to small fluctuations in oil level.
  • Allow enough time for the oil to completely drain for a thorough service.
  • Check the condition of the old oil for any metallic particles, which might indicate internal wear.

Related Shopping Categories

Shop Motor Oil for a 2020 Husqvarna 701 Enduro Dirt Bike.

Shop Oil Filters for a 2020 Husqvarna 701 Enduro Dirt Bike.

Shop Oil Drain Pans for a 2020 Husqvarna 701 Enduro Dirt Bike.

Shop Tools for a 2020 Husqvarna 701 Enduro Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2020 Husqvarna 701 Enduro Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.