How to Change the Oil in a 2020 Beta 350 RR Race Edition
Shop parts for your ride now! Shop Parts for a 2020 Beta 350 RR Race Edition Dirt Bike!.
The 2020 Beta 350 RR Race Edition sets itself apart with a newly redesigned enginelighter, with improved cooling and a more efficient oil flow circuit. This makes oil changes vital not just for longevity, but for keeping the race-tuned performance and smooth Magura hydraulic clutch action at their peak. Here’s how to do a robust oil change service tailored specifically for this model.
What You’ll Need
- Quality 4-stroke motorcycle oil (consult your manual for weight/specs, usually 10W-50 or 15W-50 full synthetic for racing)
- New oil filter (specific to 2020 Beta 350 RR Race Edition)
- New crush washer for drain bolt
- Basic socket set and wrenches
- Oil drain pan
- Shop rags or paper towels
- Small funnel
- Torque wrench for proper tightness
Step-by-Step Guide
- Warm Up the Engine
Idle the bike for 2-3 minutes to warm the oil. This helps the oil drain faster and removes more contaminants. - Stabilize the Bike
Turn the engine off. Set your 350 RR Race Edition upright using a stand or center it to prevent spillage. - Remove the Drain Plug
Locate the oil drain bolt under the engine. Place your drain pan beneath, then use the correct socket to remove the drain plug. Allow the oil to drain completely. - Remove & Replace the Oil Filter
The filter cover is machined aluminum, easily accessible on the right engine side. Remove it with a socket or Allen wrench, then gently pull out the old filter. Replace with a new filtermake sure it’s oriented correctly and lubricate the seal with fresh oil before installing. - Inspect the Drain Bolt & Washer
Clean the drain bolt and inspect or replace the crush washera new one ensures a proper seal. Reinstall and tighten the drain bolt to the torque specification provided in your manual. - Add New Oil
Use the oil filler cap on the side cover. Using a funnel, add the recommended amount of oil (the 2020 model uses a redesigned oil circuitalways check for the latest spec, but around 1.0 liter is standard). Don’t overfill. - Start & Re-Check
Run the engine gently for a minute, let it settle, then check the oil level sight glass or dipstick. Add more oil if needed to bring the level to the “full” mark. - Dispose of Oil Properly
Take used oil to a recycling facility. Never pour it down a drain or onto the ground.
Special Model Notes
- The 2020 Beta 350 RR Race Edition features a redesigned oil and cooling circuit. Oil returns via the crankcase’s front section, critical for heat transfer and temperature control. Clean installation and adherence to torque specs are essential for proper sealing and performance.
- The model sports a Magura hydraulic clutch with updated clutch discs and a magnesium clutch cover. Use high-quality oil to optimize clutch feel and lifespan.
- The oil filter cover is upgraded and easily identified by its machined-aluminum finishjust another detail highlighting the focus on easy, efficient maintenance for race-ready reliability.
How Often Should You Change the Oil?
For race or aggressive trail use, change the oil every 10-15 hours of riding or after particularly hard rides. If you just trail ride or casual ride, you can go longer, but for best durability and top-end performance, stick to a consistent routine. Always use a genuine or high-quality oil filter for this specific model and year.
Related Shopping Categories
Shop Motor Oil for a 2020 Beta 350 RR Race Edition Dirt Bike!
Shop Oil Filters for a 2020 Beta 350 RR Race Edition Dirt Bike!
Shop Oil Drain Pans for a 2020 Beta 350 RR Race Edition Dirt Bike!
Shop Tools for a 2020 Beta 350 RR Race Edition Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2020 Beta 350 RR Race Edition Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.