How to Change the Oil in a 2020 Beta 300 RR: The MotoSport Guide
Shop parts for a 2020 Beta 300 RR Dirt Bike!
Changing the oil in your 2020 Beta 300 RR is essential for optimal performance and long engine life. While the process is straightforward, there are model-specific details to note to avoid problems and keep your ride in peak condition. This guide walks you step-by-step through an oil change tailored for your Beta 2-stroke, highlights unique model considerations, and helps you avoid costly mistakes.
What Makes the 2020 Beta 300 RR Unique?
The 2020 Beta 300 RR is a high-performance 2-stroke with a proven gearbox and clutch design requiring gear oil changes–not premix changes seen in some other 2Ts. The model uses a separate transmission gearbox for lubrication and is known for easy access to oil drain plugs and a beginner-friendly maintenance setup. Owners should always double-check the manufacturer's recommended oil capacity and use a high-quality gear oil. Overfilling or using the wrong oil type may result in clutch problems or excessive case pressure.
What You Need
- 10mm, 13mm, and 8mm socket or T-handle
- Drain pan
- Rag or shop towel
- Funnel
- Recommended gear oil (refer to your owner's manual)
- Torque wrench (recommended)
Step-by-Step Oil Change Instructions
-
Warm up the engine briefly.
Let the bike idle for 2-3 minutes. This helps suspend contaminants and makes draining more efficient. -
Remove the skid plate (optional but recommended).
Use an 8mm socket to remove the two mounting bolts. This improves access and allows for a more complete cleaning of the underside. -
Place the bike upright and level.
Use a stand or have an assistant hold it to ensure all oil evacuates from the case. -
Remove the transmission drain plug.
Locate the 13mm drain bolt under the engine case. Position the drain pan, then slowly remove the plug, watching for hot oil.
Tip: The plug may have a magnetic tip & pre-filter–wipe both clean to remove any debris. -
Wait for oil to finish draining.
Let gravity do the work. Tilt the bike gently side-to-side to evacuate any remaining oil. -
Reinstall and torque the drain plug.
Clean the plug and case mating surfaces. Start threading the plug by hand, then torque to proper spec (approx. 10 Nm/7.5 ft-lbs). -
Refill with fresh gear oil.
Unscrew the fill cap. Using a funnel, add the recommended amount of oil (generally 700 cc–however, always confirm in your owner's manual or with your Beta dealer for the 2020). Avoid overfilling! -
Verify oil level.
Beta provides an oil check bolt on the clutch side. With the bike level, remove the bolt: if oil drips out, the level is correct. If not, add in small increments until it just begins to run out, then reinstall and lightly torque the check bolt. -
Check for leaks and reinstall the skid plate.
Let the engine run for a moment, shut it off, and inspect for leaks at the drain and fill points. Wipe excess oil and reinstall the skid plate.
Owner Tips for the 2020 Beta 300 RR
- Never overtighten the oil check bolt–its threads are delicate and can strip easily.
- Using high-quality gear oil matched to your riding style (e.g., hard enduro vs. casual trail) is recommended for smooth clutch operation and component longevity.
- Keep a routine log of oil changes and use only the specified oil volumes to avoid excess clutch drag or foaming.
Whether you're hitting technical singletrack or blasting through the woods, keeping your Beta 300 RR's oil fresh is the most cost-effective way to ensure performance and reliability. Make MotoSport.com your trusted source for Beta 300 RR oil, filters, and maintenance parts for every ride.
Related Shopping Categories
Shop Motor Oil for a 2020 Beta 300 RR Dirt Bike!
Shop Oil Filters for a 2020 Beta 300 RR Dirt Bike!
Shop Oil Drain Pans for a 2020 Beta 300 RR Dirt Bike!
Shop Tools for a 2020 Beta 300 RR Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2020 Beta 300 RR Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.