How to Change the Oil in a 2019 Husqvarna 701 Supermoto

Shop parts for a 2019 Husqvarna 701 Supermoto Dirt Bike.

Changing the oil in your 2019 Husqvarna 701 Supermoto is key to keeping your engine running smoothly and maximizing its lifespan. Regular oil changes will help prevent wear, maintain power, and keep your dirt bike adventure-ready at all times. Let’s walk through a step-by-step, robust guide tailored specifically for your 701 Supermoto.

Tools & Supplies You’ll Need

  • Oil Filter Kit (KTM 690/Husqvarna 701-specific)
  • 2 Liters Motorex 10W-50 (or high-quality, OEM-recommended synthetic motorcycle oil)
  • Ratchet with 13mm Socket (for drain bolts)
  • 8mm Socket or T30 Torx Bit (for oil filter covers)
  • Oil Catch Pan
  • Torque Wrench
  • Funnel
  • Clean Rags
  • Pliers or Picks (to remove oil filters if needed)
  • New Crush Washers (recommended)
  • Gloves (to keep your hands clean and safe)

Preparation and Safety

  • Warm the engine to normal operating temperature, ideally with a short, 5-minute ride. Warm oil drains easier and removes more contaminants.
  • Park the bike on a level surface and turn off the engine. Use a stand for stability.
  • Gather all your tools and supplies within reach.

Step-by-Step Oil Change Process

  1. Remove Skid Plate (if equipped): Use your 8mm socket or Torx bit to remove the skid plate for easier access to the drain bolts.
  2. Locate and Loosen the Drain Plugs:
    • The 701 Supermoto uses two engine oil drain plugs, and both need to be removed for a complete oil change. Use the 13mm socket.
  3. Drain the Oil:
    • Position the oil catch pan beneath the drain plugs.
    • Carefully remove both drain plugs and allow the oil to drain completely. Replace the crush washers if worn.
  4. Remove and Clean Oil Screens:
    • The bike has two oil screens—remove these with pliers if necessary, inspect for debris, and clean them thoroughly. This step is especially important for the 701’s high-revving engine.
  5. Replace Oil Filters:
    • Locate and remove the oil filter covers using the T30 Torx bit or 8mm socket.
    • Take out the old oil filters (be mindful of proper orientation), replace them with new ones from your filter kit, and lightly lubricate the new filter O-rings with fresh oil.
  6. Reinstall Drains, Screens, and Filters:
    • Reinstall the cleaned oil screens and both drain plugs. Tighten the drain plugs to 15Nm (screen) and 20Nm (main drain plug) using your torque wrench for proper sealing.
    • Replace oil filter covers and torque them to manufacturer specs.
  7. Add New Oil:
    • Remove the oil fill plug and insert a funnel. Begin by pouring in about 1.5 liters of the fresh 10W-50 oil.
    • Start the engine and let it idle for 30 seconds to circulate oil through the filters and passageways, then shut down.
    • Add the remaining oil to reach 1.7 liters (about 1.8 quarts), checking the sight glass or dipstick for proper level. The oil level should sit in the middle of the sight glass when the bike is upright and on a level surface.
  8. Check for Leaks:
    • Inspect all drain plugs, oil filter covers, and the area around the oil filter for any signs of leaking. Wipe away spills with a rag.
  9. Reinstall Skid Plate: If removed, reinstall the skid plate securely.
  10. Dispose of Used Oil Correctly: Take the waste oil to a proper recycling center.

Model-Year Specific Callouts for the 2019 Husqvarna 701 Supermoto

  • Oil Capacity: Use 1.7 liters (1.8 quarts) of oil for this engine, as overfilling or underfilling can cause premature wear or engine issues in the 701’s high-performance single-cylinder engine.
  • Torque Specs: Adhering to the correct torque values is crucial—tighten the screen drain bolt to 15 Nm and the main drain plug to 20 Nm for a proper seal and to prevent stripping soft aluminum threads.
  • Filter Orientation: Be attentive to the orientation of the two filters, as incorrect installation can affect oil flow and engine health.
  • OEM Filters and Oil: Using a full kit designed for the Husky 701/KTM 690 platform ensures correct fitment. Many aftermarket kits fit but always verify before proceeding.
  • Break-in Service: If it’s your first oil change, Husqvarna recommends the initial oil change at 620 miles, then every 6,200 miles after that, or adjust intervals for extreme riding conditions.

Pro Tips

  • Always let oil drain completely—patience here removes more contaminants.
  • Warm up the engine before draining, but never work on a dangerously hot bike.
  • Use clean gloves and rags to avoid contaminating new oil or filters.
  • Record the date, mileage, and type/amount of oil used for maintenance tracking.

This guide is proprietary to MotoSport.com. Maintaining your 2019 Husqvarna 701 Supermoto with regular oil changes will keep your bike at peak performance for rides to come.

Related Shopping Categories

Shop Motor Oil for a 2019 Husqvarna 701 Supermoto Dirt Bike.

Shop Oil Filters for a 2019 Husqvarna 701 Supermoto Dirt Bike.

Shop Oil Drain Pans for a 2019 Husqvarna 701 Supermoto Dirt Bike.

Shop Tools for a 2019 Husqvarna 701 Supermoto Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2019 Husqvarna 701 Supermoto Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.