How to Change the Oil in a 2019 Can-Am Outlander 570

Maintaining your 2019 Can-Am Outlander 570 is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Follow these steps to change the oil in your Outlander 570.

Shop parts for a 2019 Can-Am Outlander 570 ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket wrench set
  • Drain pan
  • New oil filter
  • 4 quarts of 5W-40 synthetic oil
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This prevents burns and ensures accurate oil drainage.

2. Remove the Skid Plate

Use a socket wrench to remove the bolts securing the skid plate. Set the plate and bolts aside.

3. Drain the Old Oil

Place the drain pan under the oil drain plug. Use the socket wrench to remove the plug and allow the oil to completely drain into the pan. Once drained, replace the drain plug and tighten it securely.

4. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the filter. Install the new filter by hand, ensuring it is snug but not overtightened.

5. Add New Oil

Remove the oil fill cap and use a funnel to add new oil. Pour in approximately 3.5 quarts of 5W-40 synthetic oil. Replace the oil fill cap.

6. Check Oil Level

Start the engine and let it run for a few minutes. Turn off the engine and wait a few minutes for the oil to settle. Check the oil level using the dipstick and add more oil if necessary to reach the full mark.

7. Reattach the Skid Plate

Secure the skid plate back in place using the bolts removed earlier.

Important Notes for the Can-Am Outlander 570

The 2019 Can-Am Outlander 570 is known for its robust performance and reliability. Regular maintenance, including oil changes, is essential to keep it running smoothly. Always use the recommended oil type and filter to ensure compatibility and performance. Additionally, check for any recalls or service bulletins specific to your model to address any potential issues proactively.

By following these steps, you can ensure your Can-Am Outlander 570 remains in top condition, ready for any adventure you throw its way.

Related Shopping Categories

Shop Motor Oil for a 2019 Can-Am Outlander 570 ATV.

Shop Oil Filters for a 2019 Can-Am Outlander 570 ATV.

Shop Oil Drain Pans for a 2019 Can-Am Outlander 570 ATV.

Shop Tools for a 2019 Can-Am Outlander 570 ATV.

Shop Oil Fillers and Drain Plugs for a 2019 Can-Am Outlander 570 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.