How to Change the Oil in a 2019 Beta 350 RR Race Edition
Shop parts for a 2019 Beta 350 RR Race Edition Dirt Bike!
Routine oil changes keep your 2019 Beta 350 RR Race Edition running with championship-level reliability. The process is straightforward, but attention to detail ensures your sophisticated Italian enduro bike gets the TLC it deserves. The 2019 Beta 350 RR Race Edition is a high-performance 349cc four-stroke with separate engine and clutch oil circuitsa design that helps maintain optimal lubrication and prolongs component life.
What You Will Need
- Beta-approved motor oil (check your manual for viscosity and type)
- Oil filters (engine and clutchorder by your specific model year)
- Drain pans
- Socket and Allen wrenches
- Clean rags
- Torque wrench
- New crush washers
- Funnel
- Gloves for safe handling
2019 Beta 350 RR Race Edition Oil Change Guide
- Warm up the engine for just a minute or two to thin the oil, but do not allow the bike to get hot. This ensures a complete drain and minimizes the chance of burns.
- Place your drain pan under the bike. For the 350 RR Race Edition, there are two separate drain boltsone for the engine oil and one for the clutch oil. Make sure to locate both under your engine.
- Using the correct wrench, remove the engine oil drain bolt first and let oil fully drain. Replace the crush washer if needed.
- Remove the clutch oil drain bolt and allow that compartment to empty, again replacing the crush washer as necessary.
- Clean and reinstall both drain bolts to factory torque spec using your torque wrench for proper seal.
- Locate and remove both oil filters (one for the engine, one for the clutch)refer to your owner's manual for exact placements on each side of the engine. Take extra care to ensure the filters and spring assemblies are replaced in the correct order.
- Install new filters, ensuring any O-rings are properly seated and lubricated.
- Using a funnel, refill fresh oil in both circuits to the correct levels as specified by Beta (consult your manual or dealer for exact quantityusually marked near the filler caps).
- With the bike upright and level, let it sit for a few minutes, then check oil levels and top up if necessary.
- Start the engine, let it run for a minute, and recheck levelstop off if required.
Key Notes for 2019 Beta 350 RR Race Edition Owners
- This model uses separate engine and clutch oil compartments. Never mix oils or swap filters between sides, as this can compromise performance and reliability.
- Always use quality oils and filters specifically intended for high-revving off-road four-strokes.
- Inspect the drained oil for unusual debris or metalearly detection of engine wear saves money and headaches.
- Be mindful of the torque spec for both drain bolts; overtightening can crack your magnesium engine cases.
- The 350 RR Race Edition is a competition-grade machine with a double cradle chromoly steel frame, adjustable suspension, and Brembo hydraulics; meticulous maintenance keeps these features operating at their best.
When to Change Your Oil
For high-performance dirt bikes like the 2019 Beta 350 RR Race Edition, oil should be changed approximately every 10 operating hours if ridden hard, or after every couple of easy rides on mild terrain. Racing and aggressive trail use demand more frequent changes to protect sensitive engine and clutch parts.
Final Tips
- Dispose of used oil and filters properly at a certified recycling center.
- Keep a maintenance log to track intervals and spot patterns.
- If you're unsure about any step, consult your dealer or authorized service tech–incorrect servicing can void your warranty or cause expensive engine damage.
Related Shopping Categories
Shop Motor Oil for a 2019 Beta 350 RR Race Edition Dirt Bike!
Shop Oil Filters for a 2019 Beta 350 RR Race Edition Dirt Bike!
Shop Oil Drain Pans for a 2019 Beta 350 RR Race Edition Dirt Bike!
Shop Tools for a 2019 Beta 350 RR Race Edition Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2019 Beta 350 RR Race Edition Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.