How to Change the Oil in a 2018 Honda Rancher 420 4X4 Power Steering (FM2)

Maintaining your 2018 Honda Rancher 420 4X4 Power Steering (FM2) is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your ATV runs smoothly and efficiently. Follow these steps to change the oil in your Honda Rancher 420.

Shop parts for a 2018 Honda Rancher 420 ATV.

Tools and Materials Needed

  • Oil filter
  • 4 quarts of 10W-30 or 10W-40 ATV oil
  • Oil drain pan
  • Socket wrench set
  • Oil filter wrench
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This prevents burns and ensures accurate oil drainage.

2. Drain the Old Oil

Place the oil drain pan under the engine. Use a socket wrench to remove the drain plug located at the bottom of the engine. Allow the old oil to completely drain into the pan. Once drained, replace and tighten the drain plug.

3. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, tightening it securely.

4. Add New Oil

Remove the oil fill cap and use a funnel to pour the new oil into the engine. The 2018 Honda Rancher 420 typically requires about 2.6 quarts of oil. Check the oil level with the dipstick and add more if necessary, ensuring not to overfill.

5. Check for Leaks

Start the engine and let it run for a few minutes. Check around the oil filter and drain plug for any leaks. If you notice any, turn off the engine and tighten the components as needed.

6. Dispose of Old Oil

Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.

Important Notes for the 2018 Honda Rancher 420

The 2018 Honda Rancher 420 4X4 Power Steering (FM2) is equipped with a reliable engine that benefits greatly from regular maintenance. The power steering feature provides enhanced control and comfort, especially on rough terrains. Regular oil changes not only improve engine performance but also extend the life of the power steering system by ensuring all components are well-lubricated.

By following these steps, you can ensure your Honda Rancher 420 remains in top condition, ready for any adventure. Remember, regular maintenance is key to a long-lasting and reliable ATV.

Related Shopping Categories

Shop Motor Oil for a 2018 Honda Rancher 420 ATV.

Shop Oil Filters for a 2018 Honda Rancher 420 ATV.

Shop Oil Drain Pans for a 2018 Honda Rancher 420 ATV.

Shop Tools for a 2018 Honda Rancher 420 ATV.

Shop Oil Fillers and Drain Plugs for a 2018 Honda Rancher 420 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.