How to Change the Oil in a 2018 Honda Rancher 420 4X4 DCT EPS (FA2)

Maintaining your 2018 Honda Rancher 420 4X4 DCT EPS (FA2) is crucial for ensuring its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes help keep the engine running smoothly and efficiently. Follow these steps to change the oil in your Honda Rancher 420.

Shop parts for a 2018 Honda Rancher 420 4X4 DCT EPS (FA2) ATV.

Tools and Materials Needed

  • Oil filter
  • 4 quarts of 10W-30 or 10W-40 ATV oil
  • Oil drain pan
  • Socket wrench set
  • Oil filter wrench
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure accurate oil drainage.

2. Drain the Old Oil

Locate the oil drain plug under the engine. Place the oil drain pan beneath it. Use a socket wrench to remove the drain plug and allow the old oil to completely drain into the pan. Once drained, replace and tighten the drain plug.

3. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, tightening it securely.

4. Add New Oil

Remove the oil fill cap located on the top of the engine. Using a funnel, pour the new oil into the engine. The 2018 Honda Rancher 420 typically requires about 2.6 quarts of oil. Check the oil level with the dipstick and add more if necessary, but do not overfill.

5. Check for Leaks

Start the engine and let it run for a few minutes. Check around the oil filter and drain plug for any leaks. If you notice any, turn off the engine and tighten the components as needed.

6. Dispose of Old Oil

Properly dispose of the old oil and filter at a recycling center or an auto parts store that offers oil disposal services.

Important Notes for the 2018 Honda Rancher 420

The 2018 Honda Rancher 420 4X4 DCT EPS (FA2) features a Dual Clutch Transmission (DCT) and Electric Power Steering (EPS), which provide a smoother ride and easier handling. Regular maintenance, including oil changes, is essential to keep these systems functioning optimally. Always use the recommended oil type and check the owner's manual for any specific maintenance guidelines.

By following these steps, you can ensure your Honda Rancher 420 remains in top condition, ready for any adventure you throw its way.

Related Shopping Categories

Shop Motor Oil for a 2018 Honda Rancher 420 4X4 DCT EPS (FA2) ATV.

Shop Oil Filters for a 2018 Honda Rancher 420 4X4 DCT EPS (FA2) ATV.

Shop Oil Drain Pans for a 2018 Honda Rancher 420 4X4 DCT EPS (FA2) ATV.

Shop Tools for a 2018 Honda Rancher 420 4X4 DCT EPS (FA2) ATV.

Shop Oil Fillers and Drain Plugs for a 2018 Honda Rancher 420 4X4 DCT EPS (FA2) ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.