How to Change the Oil in a 2018 Can-Am Outlander 450 DPS
Maintaining your 2018 Can-Am Outlander 450 DPS is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before you start, make sure you have the necessary tools and supplies, including the correct oil filter and oil type recommended for your ATV.
Shop parts for a 2018 Can-Am Outlander 450 DPS ATV.
Tools and Supplies Needed
- Oil filter wrench
- Socket set
- Drain pan
- Funnel
- New oil filter
- Recommended oil (check your owner's manual for specifications)
Step-by-Step Guide
1. Prepare Your ATV
Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure all the old oil drains out completely.
2. Remove the Skid Plate
Use a socket set to remove the bolts holding the skid plate in place. Set the skid plate aside.
3. Drain the Old Oil
Place the drain pan under the oil drain plug. Use a socket wrench to remove the drain plug and allow the old oil to completely drain out. Once drained, replace the drain plug and tighten it securely.
4. Replace the Oil Filter
Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Install the new filter by hand, ensuring it is snug but not overtightened.
5. Add New Oil
Using a funnel, pour the recommended amount of new oil into the engine. Check the oil level with the dipstick to ensure it is at the correct level. Add more oil if necessary.
6. Reattach the Skid Plate
Once the oil change is complete, reattach the skid plate using the bolts you removed earlier.
7. Check for Leaks
Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug. If there are no leaks, your oil change is complete.
Important Notes for the 2018 Can-Am Outlander 450 DPS
The 2018 Can-Am Outlander 450 DPS is equipped with a Rotax engine known for its reliability and performance. Regular maintenance, including timely oil changes, is essential to keep this engine in top condition. Always use the oil type and filter recommended by Can-Am to ensure compatibility and performance.
By following these steps, you can ensure your 2018 Can-Am Outlander 450 DPS remains in excellent condition, ready for any adventure you throw its way.
Related Shopping Categories
Shop Motor Oil for a 2018 Can-Am Outlander 450 DPS ATV.
Shop Oil Filters for a 2018 Can-Am Outlander 450 DPS ATV.
Shop Oil Drain Pans for a 2018 Can-Am Outlander 450 DPS ATV.
Shop Tools for a 2018 Can-Am Outlander 450 DPS ATV.
Shop Oil Fillers and Drain Plugs for a 2018 Can-Am Outlander 450 DPS ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.