How to Change the Oil in a 2018 Can-Am Outlander 1000 6X6 XT

Maintaining your 2018 Can-Am Outlander 1000 6X6 XT is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before you start, make sure you have the right tools and supplies.

Shop parts for a 2018 Can-Am Outlander 1000 6X6 XT ATV.

Tools and Supplies Needed

  • Oil filter
  • 4 quarts of 5W-40 synthetic oil
  • Oil drain pan
  • Socket wrench set
  • Oil filter wrench
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure accurate oil drainage.

2. Drain the Old Oil

Locate the oil drain plug under the engine. Place the oil drain pan beneath it. Use a socket wrench to remove the drain plug and allow the old oil to completely drain out. Once drained, replace the drain plug securely.

3. Replace the Oil Filter

Using the oil filter wrench, remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, ensuring it is snug but not overtightened.

4. Add New Oil

Remove the oil fill cap and insert a funnel. Pour in the new 5W-40 synthetic oil. The 2018 Can-Am Outlander 1000 6X6 XT requires approximately 3.5 quarts. After filling, replace the oil fill cap.

5. Check Oil Level

Start the engine and let it run for a few minutes. Turn it off and wait a couple of minutes for the oil to settle. Use the dipstick to check the oil level, ensuring it is within the recommended range. Add more oil if necessary.

6. Dispose of Old Oil

Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.

Important Notes for the 2018 Can-Am Outlander 1000 6X6 XT

This model is known for its robust performance and durability, making it a favorite among ATV enthusiasts. Regular maintenance, including timely oil changes, is essential to keep it running at its best. Always use the recommended oil type and filter to ensure compatibility and performance.

By following these steps, you can ensure your 2018 Can-Am Outlander 1000 6X6 XT remains in top condition, ready for any adventure you throw its way.

Related Shopping Categories

Shop Motor Oil for a 2018 Can-Am Outlander 1000 6X6 XT ATV.

Shop Oil Filters for a 2018 Can-Am Outlander 1000 6X6 XT ATV.

Shop Oil Drain Pans for a 2018 Can-Am Outlander 1000 6X6 XT ATV.

Shop Tools for a 2018 Can-Am Outlander 1000 6X6 XT ATV.

Shop Oil Fillers and Drain Plugs for a 2018 Can-Am Outlander 1000 6X6 XT ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.