How to Change the Oil in a 2017 Can-Am Outlander 1000 DPS

Maintaining your 2017 Can-Am Outlander 1000 DPS is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before you start, make sure you have the right tools and oil for the job.

Shop parts for a 2017 Can-Am Outlander 1000 DPS ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket wrench set
  • Drain pan
  • Funnel
  • New oil filter
  • 4 quarts of 5W-40 synthetic oil
  • Clean rags

Step-by-Step Guide

Step 1: Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure all the old oil drains out completely.

Step 2: Drain the Old Oil

Locate the oil drain plug under the engine. Place the drain pan beneath it. Use a socket wrench to remove the drain plug and allow the old oil to completely drain into the pan. Once drained, replace and tighten the drain plug securely.

Step 3: Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, tightening it securely.

Step 4: Add New Oil

Remove the oil fill cap and insert a funnel. Pour in the new 5W-40 synthetic oil. The 2017 Can-Am Outlander 1000 DPS requires approximately 3.1 quarts. Check the oil level with the dipstick and add more if necessary, but do not overfill.

Step 5: Check for Leaks

Start the engine and let it run for a few minutes. Check around the oil filter and drain plug for any leaks. If there are no leaks, turn off the engine and recheck the oil level, adding more if needed.

Important Notes for 2017 Can-Am Outlander 1000 DPS Owners

The 2017 Can-Am Outlander 1000 DPS is equipped with a powerful V-twin engine, which requires regular maintenance to perform at its best. Always use the recommended oil type and change it at the intervals specified in your owner's manual. Additionally, inspect the air filter and other components regularly to ensure your ATV remains in top condition.

By following these steps, you can ensure your Can-Am Outlander 1000 DPS continues to deliver the performance and reliability you expect. Regular maintenance not only extends the life of your ATV but also enhances your riding experience.

Related Shopping Categories

Shop Motor Oil for a 2017 Can-Am Outlander 1000 DPS ATV.

Shop Oil Filters for a 2017 Can-Am Outlander 1000 DPS ATV.

Shop Oil Drain Pans for a 2017 Can-Am Outlander 1000 DPS ATV.

Shop Tools for a 2017 Can-Am Outlander 1000 DPS ATV.

Shop Oil Fillers and Drain Plugs for a 2017 Can-Am Outlander 1000 DPS ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.