How to Change the Oil in a 2017 Beta 390 RR Race Edition

Shop parts for a 2017 Beta 390 RR Race Edition Dirt Bike!

Routine oil changes are crucial for peak performance and reliability of your 2017 Beta 390 RR Race Edition. This guide walks you through the step-by-step process, highlighting essential tips and model-specific notes unique to the MMY configuration.

What You Will Need

  • 4T motorcycle oil (consult your owner's manual for grade and quantity)
  • Oil filter for 2017 Beta 390 RR Race Edition
  • New crush washer or drain plug gasket
  • Socket wrench set and torque wrench
  • Oil pan and clean rags
  • Funnel
  • Safety gloves

Step-by-Step Oil Change Instructions

  1. Warm up the engine for 3–5 minutes in a well-ventilated area. This helps thin the oil, allowing it to drain faster and more completely.
  2. Turn off the engine and carefully stand the bike upright, using a stand if available.
  3. Remove the skid plate, if installed, for easier access to the drain bolt and oil filter area.
  4. Place an oil pan beneath the engine's drain plug (typically located at the bottom of the crankcase).
  5. Remove the drain plug with a socket wrench. Allow oil to fully drain. Inspect the oil for metal shavings, which can indicate excessive engine wear.
  6. Replace the crush washer with a new one to ensure a leak-free seal, then reinstall and hand-tighten the drain plug. Torque to manufacturer specsavoid overtightening.
  7. Remove the oil filter cover (usually secured by several bolts on the right engine case). Take out the old filter, being careful not to drop debris into the engine. Wipe the filter area clean.
  8. Install the new oil filter. Orient it correctly (check for markings or consult the manual). Replace the cover and torque the bolts evenly.
  9. Pour in fresh engine oil using a funnel, staying within the recommended capacity for the 390 RR Race Edition. Do not overfill.
  10. Start the engine briefly, then shut it off and check the oil level via the sight glass or dipstick. Add oil as needed to reach the proper level.
  11. Check for leaks around the drain plug and filter cover. Wipe away any spillage on engine surfaces for safety.
  12. Properly dispose of the used oil and filter at a designated recycling facility.

Model-Specific Notes for the 2017 Beta 390 RR Race Edition

  • Oil Capacity: Carefully confirm engine oil capacity—the 2017 model hovers near two quarts, but check your manual to verify the volume, especially if equipped with performance accessories.
  • Engine Design: The 390 RR engine shares its bore with the 350 RR but features a longer stroke for increased torque and more predictable traction, making regular oil changes even more vital for optimal clutch and valvetrain operation.
  • Frequent Service Intervals: If you ride in dusty, muddy, or high-performance conditions, consider changing the oil and filter more often than the standard interval to keep your powerplant protected.
  • Filter Access: The compact chassis and close routing of the double-cradle frame necessitate patience when accessing bolts and the filter—use good lighting and take care not to damage any sealing surfaces.
  • High-End Chassis: The 2017 Race Edition sports race-spec KYB suspension and a lightweight molybdenum steel frame, so protecting internal engine components with quality oil is especially important.

Final Tips

  • Double-check torque specs for the drain bolt and filter cover.
  • Routinely inspect oil for excessive debris or discoloration—both can indicate deeper mechanical issues.
  • Track your maintenance intervals for a trouble-free riding season.

Related Shopping Categories

Shop Motor Oil for a 2017 Beta 390 RR Race Edition Dirt Bike!

Shop Oil Filters for a 2017 Beta 390 RR Race Edition Dirt Bike!

Shop Oil Drain Pans for a 2017 Beta 390 RR Race Edition Dirt Bike!

Shop Tools for a 2017 Beta 390 RR Race Edition Dirt Bike!

Shop Oil Fillers and Drain Plugs for a 2017 Beta 390 RR Race Edition Dirt Bike!

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.